Equipment
2013 Adams Tight Lies fairway woods
The original Tight Lies fairway woods from Adams Golf were launched in 1995, but 18 years later golfers might need them now more than ever.
That’s because of the design of today’s fairway woods, which are much larger than the fairway woods of the past. That added size, combined with breakthroughs in materials and design, has allowed them to fly faster and farther than ever before.
But the added distance hasn’t done much to solve the No. 1 problem most golfers have with fairway woods — from anywhere but off the tee or from a perfect lie in the fairway, they’re extremely hard to get airborne.
That’s why Adams is releasing a 2013 version of the Tight Lies fairway woods, which like the original design will give golfers the confidence to hit a fairway wood even when the lie isn’t perfect.
Click here to see what members are saying about the new Tight Lies in the forums.
According to Mike Fox, director of product line management for Adams Golf, the average size of a fairway wood currently hovers around 175 cubic centimeters. But the new Tight Lies fairway woods are only 133 cubic centimeters, and have a shallow, low-profile design that makes them extremely forgiving and easy to get airborne.
Generally, smaller, low-profile fairway woods lack the distance of larger, deeper-face designs, but Fox said that golfers shouldn’t worry about losing yards with the Tight Lies. That because for the first time, Adams is using its “Cut-Through Slot Design” in a fairway wood — slots on the crown and sole of the club that increase spring-like effect.
The Cut-Thru design allows the Tight Lies to have a characteristic time of 220, which is twice as high as the originals. And despite the fact that the Tight Lies are higher spinning than Adams’ larger, deeper-faced Super S and LS fairway woods (Click here to read a full review on them), and have a slightly lower CT, many golfers will actually hit the Tight Lies farther than those clubs because of the increased carry and consistency.
At Address: 16-degree Tight Lies (Left), 14.5-degree Tight Lies Tour (right)
Adams will launch a 16-degree version of the Tight Lies fairway woods at retail on August 15 for $199, and follow shortly afterward with a 3 wood (14 degrees), 5 wood (19 degrees) and 7 wood (22 degrees) for the same price. The clubs will come stock with a Mitsubishi Rayon Bassara shaft that will measure 42.5 inches in the 3 wood.
Adams is also planning to release a lower-launching, lower-spinning tour version ($229) in early September, which will be available in 14.5- and 18-degree models and come stock with an Aldila Tour Blue ATX shaft.
Think you’re a shoo-in the for the tour model? Maybe not. According to Fox, Adams Golf Staff Members Tom Watson and Kenny Perry both preferred the standard Tight Lies fairway wood during testing this week at The Greenbrier Classic, and they are planning to use them this week in the tournament.
Click here to see what members are saying about the new Tight Lies in the forums.
Click here to see what members are saying about the new Tight Lies in the forums.
- LIKE7
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter
From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel. There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it. The putter looks new and has no wear marks anywhere on the putter. It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’ If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick. New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.
Specs:
To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic
Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.
Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.
We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.
Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).
See all of our photos from the Zurich Classic here
Rory’s on-and-off lob wedge
Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.
View this post on Instagram
A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.
See Rory McIlroy’s full 2024 WITB from the Zurich here
Turning Back the clock
Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.
But then, when you least expect it, Russ Cochran shows up.
For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.
Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.
The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.
The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.
Drew Brees with a Super Bowl winning Scotty Cameron putter
Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.
Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.
View this post on Instagram
It should also be noted that Brees has his Venmo QR code as a bag tag.
If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.
Brilliant.
See Drew Brees’ full WITB from the Zurich here
Stricker’s unrecognizable putter
Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.
Here’s a better look at Stricker’s flatstick, which he started using back in 2007.
View this post on Instagram
Patrick Cantlay has opened the equipment-switching floodgates
Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.
Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.
It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.
Daniel Berger’s custom Jailbird site lines
Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.
Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.
FitzMagic teams back up
Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.
See what else is in Alex Fitzpatrick’s WITB here
And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.
We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!
- LIKE8
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
- Alejandro Tosti what’s in the bag accurate as of the Zurich Classic.
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
3-wood: TaylorMade Qi10 Tour
Shaft: Project X HZRDUS Black 80 TX
Hybrid: TaylorMade Qi10 Tour Rescue (22 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 6.5 100
Irons: Srixon ZX7 Mk II (4-PW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100
Wedges: Cleveland RTX6 ZipCore Tour Rack (50-10 MID, 54-10 MID, 58-10 MID, 60-06 LOW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100, S400
Putter: Scotty Cameron
Grips: Golf Pride MCC Plus4
Check out more in-hand photos of Alejandro Tosti’s WITB in the forums.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Alejandro Tosti WITB 2024 (April)
Alejandro Tosti what’s in the bag accurate as of the Zurich Classic. Driver: Srixon ZX5 Mk II LS (9.5 degrees...
Drew Brees WITB 2024 (April)
View this post on Instagram A post shared by GolfWRX (@golfwrx) Driver: TaylorMade Stealth 2 Plus (10.5 degrees)...
Daniel Berger WITB 2024 (April)
Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here. Driver:...
Rasmus Højgaard WITB 2024 (April)
Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic. Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Pingback: Best Buy Adams Women Speedline Lp
George Leopold
Oct 18, 2013 at 10:41 am
I need advice on the best way to hit the Adams tight lies 16° fairway wood. If I hit it off my front foot with a sweeping motion like a driver I get no consistency. If I put it in mid stance and hit down on it like a wedge it seems to improve trajectory and distance. Any suggestions.
DBO
Dec 3, 2013 at 6:11 am
Hi George,
My suggestion is to play it two balls in front of centered. This should be halfway between driver and low iron set up. With proper swing and rotation you should make contact with the ball at the lowest part of your swing. This is the setup that I was taught from my pro and has helped me hit my 3wood and 3 hybrid more consistently straight and longer than ever.. (I used to hit 3hybrid 185-190 and now can hit it 210-220 consistent with long of 230+)
Hope this helps.
DBO
Pingback: Sneak Peak - Adams 2014 XTD line - Wow!!!!
alan
Aug 6, 2013 at 8:51 pm
Great concersation guys, except for the one jerk who shall remain nameless.
My take is that Adams is making freat fairway matals and hybrids with or without TM. Their new management may be changing the color pallete of the clubs, BUT the R&D efforts are still seperate. (my friend works at Adams and he should know)
My only comment is that while the new tight lies soundslike it will help a number of golfers hit better fairway shots, some of us have another issue. I have a very accute doenward attack angle and I need deep faced fairway metals to make solid contact with the ball. I have tried a number of shallow faced woods and I hit the ball way too high on the face.
Believe it or not, the fairway woods that have “fixed” this swing error for me are 2005 Cobra SZ’s. I got them in 3+ (13.5*) 4+ (16.5*) and a 7 (21*). Their faces are deeper than EVEN the new Calli X hot !!!!
Just another point of infoe their face inserts are 355 Carpenter steel Which may not even be conforming. I reshafted all three with Fuji Motore 65 gram F1 shafts and they blow away any new clubs when I try out the latest and greatest at my local Golfsmith on their launch monitor !!!!!1
RickStone
Jul 26, 2013 at 12:51 am
Strip’d nailed it. I play that ’02 Tight Lies 3 strong (13.5) with the tungsten face. Love this club. I actually considered replacing it with all the recent hype about RBZ stage 2 and the x-hot. So I went in to try them all out, and overall was impressed the most by the Nike Covert, standard non adjustable model (who knew?) because I hit it very consistent. Then I decided to do what most of us should do but often overlook because we get new club fever… I went and got that “old thing” out of the car and compared it to the new 3 woods. It was amazing what happened next… I hit that one consistently further than any of the newer models. The newer ones were a lil more forgiving off the tee, but shorter, and substantially shorter off the deck. Iknow, I know… it’s my club that’s why… and that is why that wasn’t the amazing part… The guys who work their started hitting my club, and the same thing happened with them! They even taped up the xhot 13 degree 3 wood… still couldn’t get it longer! At this point a small crowd had gathered around the simulator to see them try and dethrone the “old Adams ovation tight lies.” Then the manager came and broke up the action. Guess it’s not very good for selling new clubs when a club you can snag on eBay for $20 is outperforming all the new clubs…
Im nobody:(
Jul 26, 2013 at 12:37 am
Is the average age on bere really 15 ?0
t120
Jul 25, 2013 at 8:59 pm
“Think you’re a shoo-in the for the tour model? Maybe not. According to Fox, Adams Golf Staff Members Tom Watson and Kenny Perry both preferred the standard Tight Lies fairway wood… ”
Yes, well, no offense to the talents of either of these guys, but they ARE in fact playing on the senior tour and are also over the age of 50 with declining power/stamina, etc. I highly doubt either would have gamed the standard version in their prime.
Which brings me to the real question. “Could you please define ‘standard’?” – because they didn’t say OTR, and I’ve heard some companies are willing to actually make a club for a pro. Just saying.
Brockohol
Jul 25, 2013 at 5:51 pm
Is that some sort of Adams version of the “TP” logo?
I always wondered why no one has tried copying the TP “concept” for their higher end shafts/tour heads.
pinhigh
Jul 16, 2013 at 3:45 pm
Actually, I welcome this and just may have to give it a shot. I did experiment with the original Tight Lies way back with much success..but with something akin to a DGS steel shaft in it, the distances would not compete with today’s woods. I don’t know about you but the modern, low spinning and strong lofted 3W are really frustrating me and are begining to possibly be a misfit for many players today. Sure I can bomb them off the tee (currently an Adams 14.5* XTD with the Fubuki A) – that is if I catch it with a nice sweeping blow. But off the deck, I am more inconsistent with this kind of club than ever. Furthermore, there are very few times I need it with today’s long driver and long ball. When I don’t hit the driver off the tee, then it means I usually hit the hybrid off the tee because I am needing to layup from a hazard or to a yardage and the new 3W goes too far anyway. This shallow Tight Lies might give me (you) a better option off the deck on the longest par-5s and get a little more backspin and a little more carry (since the modern designers typically guard the par-5 approach anyway). Interesting!
strip'd
Jul 5, 2013 at 12:18 pm
well if there anything like the tungsten tight lies that came with the aldila shafts from back in like 02…..they should be amazing. Still have mine in the bag and its the best club ive ever owned
Joe Golfer
Jul 3, 2013 at 11:06 pm
Seems like a decent idea overall. For those dissenting, keep in mind that they also have the other two models, the LS and Super S. It’s just a third option: it’s not like it is the only model from which to choose.
I’ve found, like many, that the bigger headed 3 wood is more difficult to hit off the fairway.
While I always thought the original Tight Lies was too shallow faced for my taste, I do approve of going to a smaller head. Just maybe not this small.
Something around 150 cc’s seems about right for my taste, but it’s a subjective game, so whatever floats your boat.
Ozzie88
Jul 3, 2013 at 7:48 pm
Will the 16* be released in left handed?
Alex
Jul 11, 2013 at 3:58 pm
16* and a 19* will be offered in LH i believe.
David
Jul 3, 2013 at 7:04 pm
If I could find one of those little yellow faces that makes a “puke face” I would use it right now. The “White Devil” (TMAG) is killing this company. The last good thing from Adams was their MB irons and Super line. That titanium stuff was amazing. Now we are re-releasing stuff?!?!?!
Tom
Jul 3, 2013 at 10:32 pm
Pretty sure they will still release titanium stuff. This sounds like it is just a special edition legacy club or something. Everybody talks about how TMAG is screwing this company up, but i don’t get that. Adams is still putting out quality clubs and I’m sure their next lineup will be no exception. I agree that the white clubs was kind of a fail, but this club is matte black so maybe they are going back. 🙂
DBO
Dec 3, 2013 at 6:18 am
Taylor made has nothing to do with what the engineers at Adams do.. Adams makes superior products and this club is a beast…
GSark
Jul 3, 2013 at 12:26 pm
Wow! Adams just keeps bringing it. Yes they are called fairway metals for a reason, and I think these look hot. If the tech talk gets backed up these should be epic.The hole top end of my bag is Adams ( 9064ls, Bul and A-12) and Im not one to switch up because of how a club looks or sounds, its all feel and performance for me. Having said that I feel a change coming on!
Sebastian
Sep 29, 2014 at 5:42 am
As a prospective buyer of ADAMS Toght-Lie set, I’m coencrned about the shaft length of the set fitting a six-foot, strong senior player with a long history of serious duffing, just now settling down to maintain focus throughout the swing. Anybody out there to give a little counsel??Thanx in advance for intelligence on this issue!!
Jerry
Jul 3, 2013 at 12:04 pm
I used to play the original Tight Lies 3 & 5 woods. LOVED THEM! Very easy to hit. I am so sorry that I was influenced by the siren song of “improved” technology. I currently carry the Adams Speedline LP fairway woods. The 5 wood is my “go to” from most lies. The 3 is very hard for me to hit consistently off the deck altho it really goes when I get it flush. I will be very interested to try the new Tight Lies. Maybe I can regain that extra 15-20 yards over the 5. The small heads don’t bother me as I grew up with “real woods”. My old driver was smaller than today’s 9 metal.
JD
Jul 3, 2013 at 11:56 am
Wrote comment on iPhone sorry for the typos
JD
Jul 3, 2013 at 11:55 am
My take us that fairway woods are little if any better that classics like the Callaway BB with the Warbird sole plate , the Orlimar tri metal or the original tight lies , especially out of tough rough or less than optimal lies .
This was reinforced when I dusted off an old tri metsl to play Torrey Pines with the rough up – it vastly outperformed “modern” stuff – the 12 degree Warbird went back in the bag as a short driver – par 5 attacker as well -,and I hit a high draw and play to a 4.3 so don’t need much help – just think fairway woods “advances” are hyoe not performance – anyone else agree?
Hope this is an exception
Jack
Jul 3, 2013 at 9:49 pm
I agree on that. The biggest difference may be the shaft that’s going into the head. I’m thinking the biggest difference though is the development of hybrid heads. I think in most situations a hybrid beats a 5W. Though I’ve normally had a 5W in the bag. I guess I’m not really thinking get on the green from 200 plus yards and from the rough.
Asleep
Jul 3, 2013 at 11:51 am
Nice to see Adams bring back the Tight Lies line with a small headed 3-wood. I always preferred the smaller head size. I bet sound & feel is excellent.
michael
Jul 3, 2013 at 9:24 am
dont like the cursive adams logo… i hope thats not there new logo…looks old and weak.
Launcher
Jul 3, 2013 at 2:40 pm
It is their new logo, and I agree, it’s hideous!
R.I.P. to the real AdamsGolf.
TM is f-ing things up at a record pace.
benseattle
Jul 9, 2013 at 3:00 pm
<>
I agree completely. This is a perfect reason to hate a golf club.
(Golf would be a great game if we didn’t have to put up with the “golfers.”)
Jonathen
Jul 3, 2013 at 3:32 am
shawn…adams has always made great hybrids. I dont like that taylormade influenced adams to make their clubs with a white crown, i dont like the white crown.
mike…i am going to agree with mr.carroll on this one. it seems like adams designed this club for the tight fairway lies and it shouldnt be used from thick stuff.
i do find the slot on the top a little big for such a small head but i would be interested in hitting it to see what it can do. i myself have a fast10 3 wood and an a12 hybrid and find them to be great additions to my bag. we shall see. low profile irons would be an interesting idea. do you mean small top line..?
Mike B
Jul 3, 2013 at 1:18 am
I hate low profile small headed woods! try using them in thick rough and watch the club go under the ball! What’s next Adams… Low profile irons? TMaG is trying to kill you off!
Shawn Carroll
Jul 3, 2013 at 3:22 am
Mike B – the club is called “Tight Lies” for a reason. I don’t think the Adams R&D department designed this club to be hit out of thick ruff and bermuda and fescue. This club should be used from tight fairway lies…And since Taylormade Golf bought Adams Golf, they have together produced some of the best adams woods including the Super LS series and Fast12 series.
larry fox
Jul 3, 2013 at 11:49 am
Well said
GSark
Jul 3, 2013 at 12:31 pm
They are called fairway metals for a reason. You should not even be thinking about trying to hit a “fairway metal” from the rough.
Michael Benjamin
Jul 25, 2013 at 6:28 pm
GSark… you are a knuckle head. If people can hit a wood out of the rough then they should take advantage of it. What about when the rough is thin (like when a tree blocks the sun and grass thins out around it), or when the rough is burnt out, or when the lie is perfect in the rough, or when the ground is firm and you can absolutely get enough club face on the ball without worrying about the rough grabbing your club head, or when you do not suck at golf? The only concession I will give you is that there ARE definitely times when you should not be hitting a wood out of the rough, but to make a blanket statement like you did is pretty bush league.
brian
Jul 25, 2013 at 8:47 pm
seriously? dude dont name call. Calling other people names like we are kids out on the playground is really something thats bush league. Its cool to disagree, but no need to do that
I am really excited for this club to come out i definitely could use a fairway to help me get the ball up in the air out of the fairway. I really cant wait to get my hands on this bad boy at a demo day
Michael Benjamin
Jul 29, 2013 at 3:52 pm
Brian, learn to hit a 3 or a 4 iron…
BT
Definition of “Knuckle Head” – (informal) ill-informed; a person of questionable judgement.
John
Jul 3, 2013 at 9:06 pm
Well if you actually played golf for any time you’d know how amazing the are from any lie.
Blanco
Jul 2, 2013 at 7:49 pm
I thought the slot on top didn’t help distance enough to matter? I just can’t stand that scooped slot on the crown but otherwise looks like a nice product. I especially like the 16º loft at 42.5″… that’s hot.
What’s the Tour Blue ATX? Is that the retail name for the tour blue?
Jeff
Jul 2, 2013 at 7:12 pm
that’s hot
Dave
Jul 23, 2013 at 1:45 pm
I’m excited about these. I’m sure they won’t be anything over the top but they will be easier for the average player to hit out of the rough and fairway.