Golfers don’t enjoy the game when they struggle to keep the ball in play. There is no question the primary causes of inaccuracy result from errors in the golfer’s swing path and/or rotation of the club face back to the ball. However, through accurate clubfitting, it is possible to make changes in a number of specific fitting specifications of the clubs to visibly reduce the golfer’s misdirection tendencies.
It is also probable for changes in the some of the fitting specifications related to accuracy to be able to allow golfers to benefit more from lessons to more easily make changes in swing path and/or delivery of the face to the ball to result in accuracy improvement. Making swing changes in the path and face delivery change are much more difficult to accomplish when the clubs are too long and/or are the wrong total weight and swing weight for the golfer.
There is a limit to what clubfitting changes can do to achieve an improvement in accuracy. If the golfer’s slice or hook is too consistently severe, lessons to improve the golfer’s swing path and face delivery should always be the first priority. In general, if the golfer consistently slices or hooks the ball more than 30 yards of sideways movement, lessons should be always advised before a fitting change. But for golfers who slice, hook, push or pull the ball from 10 to 30 yards, accurate fitting for the specifications which do have a significant effect on accuracy will enable them to experience a definite level of accuracy improvement.
The fitting changes that can improve shot accuracy do not typically CURE or completely eliminate the inaccuracy of the golfer’s shots. They act to REDUCE the severity of the misdirection shots and tighten the overall range in shot dispersion for the golfer.
To do everything you can to improve shot accuracy through clubfitting changes, the following are the key fitting elements which have a bearing on accuracy. Through our research we have been able to identify which fitting specifications have a major effect (“A effect” specifications) and others which have a medium effect (“B effect” specifications). In addition, some of the fitting specifications show their effect for accuracy more with one segment of the clubs than with others. In the chart accompanying this article, we have identified which fitting specs have more of a major “A effect” on accuracy, which have a medium “B effect” and which have “no effect” on accuracy.
The most significant “A effect” fitting specifications which have a direct effect on shot accuracy are:
- Lie angle in the irons, wedges and putter.
- Face angle in the driver, fairway woods and hybrids.
- Club length, particularly so in the driver and fairway woods.
- The shaft weight, total weight and swing weight.
The “B effect” fitting specifications which have a little less of an effect, yet which still can bring about improvement in accuracy are:
- The face progression/offset, the center of gravity (CG) location.
- Lie angle in the driver and fairway woods.
- The torque, flex and bend profile of the shaft.
- Grip size.
- The set makeup selection of the clubs.
The A Effect: Fitting specifications for accuracy
1. Lie Angle
The higher the loft of the club head, the more the misdirection angle caused by an improperly fit lie to the golfer will translate into an off-line shot. The lower the loft of the club head, the less this is a visible factor for accuracy. Without question, every golfer needs to have each of their irons, wedges and yes, the putter correctly fit for lie angle for their physical stature, swing characteristics and posture/hands position through the ball. Without question, lie fitting must be done in one of the two dynamic lie fitting methods – either with the lie board or the ink on the back of the ball method. And the reason the putter lie is so important even though it has the lowest loft of all club heads is because the target for the putt is so small (4 1/4-inch small!).
2. Face Angle
Proper fitting of the face angle of the driver, fairway woods and hybrids is the number one most effective means to reduce the golfer’s misdirection tendencies with the driver, woods and hybrids to bring about visible improvement in accuracy. Using a more closed face angle to reduce the severity of a slice or a more open face angle to reduce the amount of hook is not a “Band-Aid” for the golfer’s swing path and face delivery errors. A change in the face angle acts as a direct 1:1 correction for the number of degrees the golfer leaves the face open or closed at the moment of impact. How much does a face angle change correct for a slice or hook? Based on a carry distance of 200 yards, a 1-degree change in the face angle from the face angle the golfer has results in a 4- to 5-yard reduction in the slice or hook. For a golfer with a 20- to 30-yard slice or hook, a face angle that is 2 to 3 degrees more closed/open THAN WHAT THEY CURRENTLY PLAY can easily be the difference between the ball being in play or out of play.
3. Club Length
The longer the length of the club, the higher will be its assembled club MOI. We’re not talking about the MOI of the head itself — we’re talking about the MOI of the fully assembled club. The higher the MOI of the club, the more load the club places on the golf swing for the golfer to overcome to be able to swing the club on the proper path and rotate the face back around to impact. The more load the club places on the swing, the more the weaker elements of the swing are subject to becoming more inconsistent.
For golfers with an outside-in path, a forceful transition move, a faster tempo and an earlier release, a longer-length driver and fairway woods will contribute to inaccuracy of the shot.
The reason that longer length is not as much of an accuracy problem with the irons is because irons as a group are much shorter in relation to the driver and fairway woods. In addition, few golfers play irons that are more than 1-inch longer than the old standard of 30-plus years ago. Not so with drivers where today’s “standard length” is 2 to 3 inches longer than the driver length standard of 30-plus years ago. That means that few golfers end up playing with irons that are more than 0.5 to to 1 inch off from what they should be playing. Today’s 45.5 to 46.5-inch driver lengths and 43.5-inch 3 wood lengths seen on so many retail models are much longer than what most golfers have the ability to control.
4. The Shaft Weight, the Total Weight and the Swing Weight
In combination together, the shaft weight, total weight and swingweight/MOI of the clubs can definitely be an “A Effect” for accuracy improvement. If the overall weight or feel of the clubs is too light or too heavy for the golfer’s transition force, downswing tempo, strength and individual perception for weight FEEL, more severe mistakes can be made in the swing path, release and on-center hit proficiency that will affect accuracy.
Of these, the swingweight/MOI (the headweight FEEL) is the most important contributor for effect on accuracy. The reason is because the swing weight/MOI can be increased to offset the effect of a shaft weight/total weight that is too light for the golfer. On the other hand, if the shaft weight/total weight is too heavy for the golfer, no swing weight/MOI adjustment can overcome the effect of a too heavy shaft weight/total weight on accuracy.
Remember, the weight of the shaft is the number one controlling factor for the total weight, so when you are fit for the shaft weight, you are covering 95 percent of the fitting for total weight at the same time. Hence from a fitting standpoint, shaft weight and total weight are considered the same thing. Only when an excessively heavy or extremely light grip is used does the weight of the grip show a noteworthy effect on the total weight of the clubs.
These combined “weights” of the golf club have to be fit to match each golfer’s unique combination of transition force, downswing tempo, strength and any personal preference for what the golfer perceives to be the “right weight feel.” If the weighting of the clubs is too light, either in total weight or head weight feel (swing weight/MOI), golfers with a stronger transition, faster tempo and greater strength can get too quick with their swing tempo and greater inaccuracy can result from the golfer not being able to achieve a consistent swing path and/or delivery of the face to impact.
Conversely, if the weighting of the clubs is too heavy in either the total weight or swing weight for the golfer’s transition, tempo, strength or feel, the golfer’s with the consistency of path and face angle delivery to the ball will also suffer. Either way, if the weighting of the clubs is matched properly to the golfer’s transition, tempo, strength and feel preference, the golfer can improve the consistency of the accuracy of the shot.
The B Effect: Fitting Specifications for Accuracy
The concept of the B Effect specifications on each of the game improvement factors is to say that on their own, each of these specifications may not bring about much more than a subtle improvement. However, if any of the B Effect specifications are poorly matched to the golfer in his/her current clubs, it then is more likely the change in the B Effect specifications can offer visible improvement. However, in combination, the proper fitting of several to all of the B Effect specifications can add up to be almost as important as some of the A Effect specs on a game improvement factor.
1. The Face Progression/Offset and the Center of Gravity (CG) location in the club head
The chance for the FP/Offset or CG to bring about any improvement in accuracy depends heavily on whether these elements were very poorly matched to the golfer’s swing characteristics in the present or previous clubs. Less face progression/more offset as well as a lower CG can generate a slightly higher ball flight with more spin, which for some golfers may combine with an open or closed face at impact to accentuate the amount of hook or slice spin on the ball.
Conversely, more face progression/less offset as well as a higher CG can generate a slightly lower ball flight with less spin, which for some golfers may combine with an open or closed face at impact to slightly reduce the amount of hook or slice spin on the ball. Seriously though, these are slight factors at best which border on being no factor for accuracy for many golfers.
2. Lie Angle in the Driver and Fairway Woods
The higher the loft, the more an ill-fit lie angle contributes to misdirection on the shot. Even though the driver and fairway woods are hit farther than the irons, because of their much lower loft, there is so much less of a misdirection angle of the face that the longer distance these clubs are hit does not cause a less than perfect driver/fairway wood lie to contribute very much to inaccuracy.
However, it should be said that for many golfers, modern fairway wood lies are too upright and can affect the solidness of the shot as well as a smooth travel of the sole on the ground through impact. As such, if the hosel design of the fairway wood will allow the lie to be adjusted to better fit the golfer and allow the sole to travel level through impact, by all means that should be done as a part of the fitting process.
3. The Torque, Flex and Bend Profile of the Shaft
In modern shaft design, 98 percent of the time the torque is designed to coordinate with the overall stiffness (Flex) of the shaft. In other words, you’re not going to find a 5-degree or 6-degree torque in an X-flex shaft and you’re rarely going to see a 2-degree or 3-degree torque in an A- or L-flex shaft.
Shaft designers realize that a substantial part of the swing characteristics that cause a shaft to bend more (the transition force to start the downswing along with the club head speed) are also the swing elements that cause the shaft to twist (torque). Hence when the overall stiffness (flex) is fit correctly to the golfer, rarely will there be a case when the flex is fit correctly but the torque is far enough off to be a cause of misdirection for the shot. Occasionally with VERY aggressive swingers, but not very often. From a shaft feel standpoint, yes, there are golfers who can detect the stiffer feel that comes from a lower torque, but from a pure accuracy standpoint, 98 percent of the time the golfer is correctly fit for the flex and the bend profile of the shaft, he will also be properly fit for the torque from the standpoint of accuracy.
There are some golfers who swear that playing too stiff or too flexible of a shaft will have a significant effect on accuracy. It is true that if a golfer with a later-to-late release were playing a shaft that was two full flexes too stiff or too flexible for his swing, there would be a visible change in the flight shape of the shot — higher and with a little more tendency for a draw. But even if a late-release golfer were to use a shaft that would be two full flexes softer than what he needed, the result would only be a visible increase in a draw only if the golfer’s natural flight tendency was to draw the ball. But rarely would the increase in draw be enough to hit the ball out of play.
The reason some golfers experience an accuracy problem playing with the wrong flex is chiefly because a feel-sensitive golfer’s perception of poor flex feel can cause the golfer to make swing errors/changes that result in a drop in accuracy. A bad feeling shaft can cause some golfers with a fine sense of perception to swing differently than they will when playing a shaft that feels just right. But this is not the case with the majority of golfers who do not have a specific perception of bending feel for the shaft.
The primary reason for properly fitting a golfer for the flex and bend profile of the shaft is to allow the flex/bend profile to combine with the loft of the club head to optimize the golfer’s launch angle, spin and angle of descent. In addition, as previously stated, proper flex and bend profile fitting is also important for fitting the golfer with the right bending FEEL that matches his preference for that type of feel. If the shaft flex and bend profile are fit properly for launch angle, spin and bending feel, it will have no significant effect on accuracy.
4. Grip Size
It is simply not true that all golfers who play with a grip that is too small will pull or hook the ball more, and all golfers who play with too large of a grip will push or slice the ball more because of the way the ill-fit grip size affects the golfer’s release. However, it is true that if the grip size does not feel comfortable to the golfer, this can translate into adversely affecting the golfer’s swing tempo, swing path and release, which in turn can affect the accuracy of the shot. Bottom line: Fit every golfer for a comfortable grip size and any possibility of the grip affecting the accuracy will disappear.
5. Set Makeup
How could the set makeup have an effect on accuracy? By replacing hard-to-hit clubs the golfer may be hitting more off line with clubs that are easier to hit by virtue of their design. That will result in better accuracy for the same distance.
For example, it is not uncommon for a golfer with an outside-in path and fast swing tempo to hit the fairway woods with some degree of inaccuracy, but be able to hit hybrids the same distance and more accurately because of the shorter length of the hybrids.
For the driver, fairway woods and hybrids, the key elements for maximum accuracy in the fitting process are the length, face angle and the combination of the shaft weight/total weight/swingweight (MOI) of the clubs. Within these three fitting elements, many golfers who presently suffer from misdirection problems most definitely can achieve a visible improvement in accuracy.
For the irons, the key elements for maximum accuracy in the fitting process are the lie angles along with the combination of the shaft weight/total weight/swingweight (MOI) of the clubs.
Get these fitting specifications perfectly matched to the golfer’s swing characteristics and pretty much everything that can be done to maximize the golfer’s shot accuracy will have been done. After that, if the golfer still suffers from a significant misdirection problem, the remedy will be lessons to work on improving the golfer’s alignment, posture, swing path and delivery of the face to impact.
The Gear Dive: Episode 100
In this 100th episode of The Gear dive, Johnny looks back at his top 5 favorite moments and discusses what’s to come in the equipment industry as we come out of the lockdown haze.
The Wedge Guy: 3 keys to handling pressure
Whether you play competitively or not, “pressure” is a big part of this game. Even if we are out for an evening practice nine, when we get over any shot, from drive to putt, we are putting “pressure” on ourselves to perform to our best capability.
So just what is pressure? My dad used to tell us the story about a guy who wanted to learn how to walk the tightrope. He strung a rope across his yard about a foot off the ground and started practicing—first just balancing, then walking, skipping—he got where he “owned” that tightrope. So, he decided he was ready for the big top, to join the circus. The circus manager says, “Well, climb up there and show me what you’ve got.” When he got to the top and looked down about thirty feet, he couldn’t even get off the platform.
Pressure affects all of differently, but it does affect all of us. How can we totally jack a two-foot putt sometimes? How can we chunk a chip shot? We don’t do that on the practice tee! But then, how can tour pros hit some of the gosh-awful shots we see them hit coming down the stretch? No one is immune.
So, I want to share my three keys to handling pressure. I’d like for all of you to chime in with your own personal keys that you use with success.
Here are mine:
- Recall success! The first thing that happens in pressure situations is that fear sets in. You may find yourself thinking of that last short putt you missed, or that chip you chunked, or bunker shot you skulled. In Dr. David Cook’s book/movie “Seven Days In Utopia”, the mentor tells his student, “See it. Feel it. Trust it.” See the shot you have and recall the dozens or hundreds of ways you’ve successfully executed it before. Take a few practice swings and feel the swing that will produce that vision. Then trust your skill that you KNOW you have and just execute.
- Get S-L-O-W. It’s a natural tendency to get quick when we are under pressure. As you begin to approach the shot, slow down a bit. If you are riding in a cart and approaching the green, pause for a count before you jump out of the cart. Take a breath before you pull the clubs from the bag. Walk a little more slowly over to your ball, which gives you time to think those successful thoughts we just talked about. Make your practice swings or strokes a little slower, more deliberately. And feel the end of your backswing. The quickness killer is not finishing the swing, whether it’s a full iron shot, a short chip or pitch, or even a putt. FEEL the end of the backswing to neutralize quickness.
- Lighten up! A nice relaxed grip is essential to a good golf shot of any kind, but pressure affects that first, most of the time. When you are feeling a little “amped up”, focus on your grip pressure and R-E-L-A-X. Your body will not let you hold a club too softly, but pressure sure can make you put the death grip on the club. And it is hard to swing too quickly when you have a nice soft grip on the club.
So, those are my “three keys” to handling pressure. Try them the next time you find yourself a little nervous, whether it’s for the club championship, or just beating your buddies out of a few bucks.
And let us know your keys to handling pressure, too!
Coming out of the haze: What to expect from the OEMs in the second half of 2020
As we slowly come out of the lockdown haze, it’s going to be interesting to see which OEMs are primed to come out swinging. From where I sit, there are a few companies that either kept the foot on the pedal or found new ways to interact with the masses. I have been tracking the major companies for different reasons, and I am optimistic on most fronts. Now, it needs to be said that everyone has been keeping the respective momentum going in their own ways—this has been a challenge for everyone, so this analysis is simply a commentary on what may come in the second half of the year.
Many good folks were either furloughed or laid off during this lockdown—that’s where we all lost. It needs to be acknowledged that we are talking about golf here, but the underlying reality of this is still devastating. I so look forward to getting into the trenches with these folks again either back where they were or at new companies.
Big giant club company or big giant marketing machine…it doesn’t matter what you label them as. TaylorMade Golf, in my opinion, turned the heartbreak of stalling one of the biggest first quarters in company history into an opportunity to start talking…and teaching. With the help of the tour team and TM athletes, TaylorMade focused hard on talking to us all during the lockdown. With multiple initiatives through social media, the Driving Relief event, and the tour staff engaging way more than usual. I believe TM created a runway to start moving quickly once stores and pro shops open up again.
Let’s face it, with the social media presence, the most robust tour staff maybe ever, and the driver everyone seems to have reserved for the top big stick of 2020, what’s not to be confident about? On the flip side, a company that big could have really taken it on the chin hard, but how they handled the lockdown—from my chair—was fun to watch and will ultimately ensure a quick restart. There is something to be said about having guys like Trottie, Adrian, and Hause in the fold informing and keeping things fun.
Rumor has it new irons are dropping in the fall/winter, which could spell two awesome bookends to a bittersweet 2020.
PXG leaned in
Why online sales for all OEMs spiked is no mystery. Boredom, desire, and a credit card are keys to any great online buying experience, but PXG made certain that if you were not a buyer previously, you may be now.
The price tag has always been a key topic with Bob Parsons’ Scottsdale-based company. It’s no secret that the clubs aren’t cheap, but during this lockdown, they did multiple strategic initiatives to not only crank up direct-to-consumer buying but also expand the PXG conversation into different areas, namely fashion.
Price cuts across the board started early and, rumor has it, enabled PXG to achieve sales numbers unlike any other period in the company’s short history. Yes, cutting prices helps unit sales, but in the case of PXG, it brought in the club customer that ordinarily shied away from PXG for financial reasons and ultimately made them buyers. That’s where PXG seems to shine, once they finally get you in, they are very effective at keeping you in the family. Mercedes-Benz AMG is like that: once you have had a taste of the Kool-Aid, it’s hard to go back to Hawaiian Punch.
In addition to the aggressive price-cutting, PXG fashion, spearheaded by President Renee Parsons, launched a new collection that is designed and manufactured by PXG. Fashion in times like these is always a risk from a financial standpoint, but this launch has been on the calendar since the BOY and the current lockdown did not disrupt that. It speaks to the confidence that Bob and Renee have in what they are doing. Now, is it a guarantee that PXG garments will fly off the shelves? No. but that’s not the point, it’s the fact that this current climate didn’t scare them into pivoting or holding off.
Point to this pick is PXG looks healthy coming out of this and it was possible to believe that perhaps this would have taken a toll on the custom fit brand. There is even a commercial produced during lockdown to attract even more club builders to the fold. Not normal behavior in times like these, but is anything that PXG does normal? No, and that’s what makes them fun to talk about.
The company also released its Essential Facemask with 50 percent of proceeds going to Team Rubicon.
Ping was quiet…but don’t be fooled
Yes, they did some rare social media engagements with Kenton Oates and the tour staff, which were fantastic. But the real magic here was the quiet way in which Ping slipped into 2020 and the mystery they have in hand and what’s to come next.
There hasn’t been really any new Ping product in a good while, and I anticipate a big winter for the Solheim crew. Sometimes, silence is golden and from what I can gather, what Ping has coming in irons and woods will be yet again a launch that gets people talking.
Ping from a business standpoint is a company that gets one percent better every year. Never any dramatic shifts in strategy or product. It’s always good, it’s always high-performance, and it’s always in the “best of” category across the board.
Watch out for them over the next six to nine months…a storm is brewing. A good one.
Cobra introduced the “Rickie iron”
Compared to 2019 and the runaway success that was the F9 driver, Cobra Golf seemed to cruise along in the first quarter of 2020. The SpeedZone metal wood line was an improvement tech-wise from the F9 but seemed to get lost in the driver launch shuffle with an earlier release—and frankly everyone in the industry took a back seat to TaylorMade’s SIM.
It’s not placing one stick over the other actually, I have been very vocal about my affections for both, it’s just some years, the story around a club can generate excitement, and if the club is exceptional, boom. Cobra was that cool kid in 2019.
What Cobra decided to do in the downtime is slowly tease and taunt with a “Rickie Fowler” iron. Players blades aren’t typically the driving element of any business model, but what Cobra did was introduce to a beautiful yet completely authentic forging that will not only get the gear heads going nuts but also entice the better players to start looking at Cobra as a serious better players iron company. No small feat.
Point is, Cobra has generated buzz. It helped that Rickie’s performance at Seminole was just short of a precision clinic. Beyond the Rev 33, its rumored Cobra has a new players CB coming and some MIM wedges.
It should be an exciting last half for the Cobra crew.
The Titleist train chugged on
I mean, what else is there to say about Titleist? They are as American as apple pie, have a stranglehold on multiple tour and retail categories, and one of the best front offices in golf. The company is a well-oiled machine.
So what do I expect from them in the last half? Well pretty much what I would expect on any other year, solid player-driven equipment. A metal wood launch is coming, the SM8 was a huge hit in stores and on tour, and the ball portion is the biggest 800-pound gorilla in golf.
It was also nice to see a little more social media interaction beyond the traditional. Aaron Dill has been very active on the social media front and a good portion of the tour staff, namely Poulter, JT, and Homa were proactive in engagement. Might seem trivial to some, but specifically, Titleist and Ping are not super active in the organic interaction game, so it was nice to see both companies dive into the fold.
Cleveland/Srixon should have a lot to look forward to
Let’s be honest here, 2019 was a quiet year overall for Srixon. Shane Lowry won The Open, but in the golf mainstream it was a leap year for them in regards to any launches. The anticipation from me personally of what is to come is quite strong. I adore the irons. I have yet to meet one I didn’t love, and fitters across the country will speak to that in sales. The Srixon iron line has become a popular yet-sort-of-cult-classic among fitters and gearheads and rightly so. They are phenomenal.
The recently teased picture of the new driver on the USGA site more or less teased us of what is to come for the overall line. New Cleveland wedges are coming shortly and the golf ball has always been a solid component to the Huntington Beach company.
As much as anyone in the market, I believe Srixon could finish the year with some serious momentum going into 2021. The irons and ball have always been firestarters. My only wish for them, selfishly, is a more aggressive tour strategy in regards to landing one of the perennial top 10. It seems like a dumb thought, but I have always felt Cleveland/Srixon was always a serious hitter that at times seems to get lost in the conversation. Having a big gun on staff or a couple of them will remedy that quickly.
Callaway has an eye on big things for the golf ball
Callaway, a company that seems to do it all well, was actually a bit quiet since the lockdown started. After a solid release of the Mavrik line and some momentum in the golf ball area, I’m sure this lockdown probably felt like a kick to the shin.
However, this company is shifting in a good way. The idea that they were a golf club company that happened to make golf balls is slowly turning into a company with multiple major components that stand alone. TaylorMade is on a similar shift, and honestly it’s very interesting to watch. Do I think that anyone will ever catch Titleist in the ball category? No, I don’t. All of these mentioned golf balls are ridiculously good, but 75 years of trust and loyalty are hard to compete with. But that’s not the point, Callaway is a monster company that takes the golf ball conversation very seriously, and I believe this will serve them very well coming out of this craziness and help the momentum going into 2021.
GolfWRX exclusive: The story behind the new Costco KS1 putter
Greatest Mizuno blade irons of all time
GolfWRX Members Choice: Best driver of 2020
Greatest TaylorMade Irons of all Time
GolfWRX Insider: The real story of Tiger’s Titleist 681T irons
GolfWRX Insider: An exclusive look inside the bag of Fred Couples
Don’t do this to your clubs at home!
Remembering golf’s forgotten big brands
What GolfWRXers are saying about the clubs they regret selling
Winning WITBs: Rory McIlroy, Dustin Johnson WITBs for TaylorMade Driving Relief skins
Chris Baker WITB 2020
Equipment accurate as of January 2020 Driver: Callaway Epic Flash Sub Zero Triple Diamond (9 degrees, D1 setting) Shaft: Nippon...
Tiger Woods, Peyton Manning winning WITBs: The Match: Champions for Charity
Tiger Woods WITB Driver: TaylorMade SIM (9 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade M5 (15 @14.25...
Daniel Wetterich WITB 2020
Equipment accurate as of the Honda Classic. Driver: Titleist TS3 (8.5 degrees) Shaft: Fujikura Atmos Blue Tour Spec 7 X...
Peyton Manning, Tom Brady WITBs for The Match: Champions for Charity
Peyton Manning WITB Driver: Callaway Mavrik Shaft: Graphite Design Tour AD TP 6 X 3-wood: Callaway Rogue Irons: Callaway Mavrik...
Equipment3 weeks ago
GolfWRX exclusive: The story behind the new Costco KS1 putter
Equipment3 weeks ago
GolfWRX Members Choice: Best driver of 2020
Equipment2 weeks ago
Don’t do this to your clubs at home!
Whats in the Bag1 week ago
Winning WITBs: Rory McIlroy, Dustin Johnson WITBs for TaylorMade Driving Relief skins
19th Hole2 weeks ago
Holly Sonders recalls ‘worst day’ of her life after 2015 U.S. Open interview – GolfWRXers react
Whats in the Bag2 weeks ago
Rickie Fowler, Matthew Wolff WITBs for TaylorMade Driving Relief skins
Equipment2 weeks ago
The “real” firsts of the golf industry
Equipment2 weeks ago
GolfWRX Insider: Inside the development of Rickie Fowler’s Cobra irons (plus full specs)