Equipment
Spotted: Scottie Scheffler with prototype Logan Olson putter
We have seen Scottie Scheffler testing out a few different putters from traditional blades to custom mallets recently.
At the Hero World Challenge, Scheffler has been spotted with another new putter, this time from a manufacturer many golfers may not be familiar with: Olson Putter Co. Started by Logan Olson, the company has been making some amazing custom putters for over seven years.
Olson’s putters have classic head shapes but are highly customized with a lot of cosmetic — and performance-enhancing — machining.
Recently, Olson took a break from posting much on social media or creating putters for customers, and people were concerned he was out of the business. Olson then posted a note explaining that he had the chance to work on something different, and now we see what that was.
Scottie Scheffler’s putter is custom-built and based off an Anser 2 or Newport 2 head shape. This means it is a traditional blade with sharper angles and a boxier look from address. The flange looks to be slightly extended from the face and has a single site line painted black on it. The top line has a very interesting alignment aid; it looks to be many small milling lines that run from the face to the flange to possibly frame the ball better.
Larger bumpers are slanted down towards the center cavity where “Logan Olson” is stamped in a dancing font and the “O”s are all circles with fancy “L”s in them. The neck looks to be one piece with the body of the putter as the milling around the base is very angled and complicated. A standard-length plumbers neck rises up and the corners of it look to be softened just a bit. The face has what looks like a shallow milling to it with the Olson logo on the heel.
View this post on Instagram
The underside of the putter reveals a tri-sole stamped “343/303.” We can assume that the weight of the putter is 343 grams and it is milled from 303 stainless steel. Scottie’s name is also stamped into the sole, and another circle with an ornate L is stamped out on the toe.
More “spotted” pieces
- Spotted: TaylorMade Qi10 driver joins Qi10 LS on USGA conforming list
- Spotted: PXG 0311 Black Ops drivers (4 new models)
- Spotted: Raw Ping S159 wedges in Harris English’s bag
- LIKE80
- LEGIT14
- WOW10
- LOL4
- IDHT0
- FLOP1
- OB0
- SHANK8
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE6
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE8
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE1
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks ago
Anthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
Jim Thomson
Dec 3, 2023 at 10:06 am
With a little imagination, one can make out the letters O, L, S, and N in the so-called “circles with fancy “L”s in them.” Perhaps it’s an Olson trademark?
T-Bone
Dec 1, 2023 at 12:59 pm
That doesn’t look just like a Cameron…at all.
Vince
Dec 1, 2023 at 11:51 am
Wow, a stainless steel (cheap), milled Anser 2 style putter.
Bruce
Nov 30, 2023 at 6:10 pm
The minute these Anser knockoff poseurs start to pay KARSTEN for the design rip-off they are profiting from, I’ll pay attention. Patents expire but these just shameless exploitation of his inspired designs.