Equipment
Gold medal gear: An inside look at Xander Schauffele’s Olympic WITB
It was less than 30 days ago that Xander Schauffele stood atop the podium at Kasumigaseki Country Club’s East Course in Tokyo, gold medal around his neck. Schauffele vanquished a field of 120 competitors from 42 nations by a stroke in the men’s golf competition.
It’s only once every four years that we get the chance to compile a gold medal-winning WITB in men’s golf, so we wanted to offer a more robust entry in the 2020 Olympic golf time capsule. To that end, we enlisted the help of Jacob Davidson, PGA Tour Manager for Callaway, to dig deep into the contents of Xander’s toolbox.
Callaway has seen staffers take two of the four major championships this season and the top spot in Tokyo. Investments in R&D and manufacturing — on the golf ball side in particular — are paying dividends in general, and as you will see in our conversation, for Schauffele in particular — perhaps most notably in the areas of his golf ball (Chrome Soft X LS) and irons (Apex TCB).
Our discussion with Davidson (edited for length and clarity), below.
GolfWRX: What type of player is Xander with respect to his equipment? Is he a tester and tinker, always searching? Is he more of a “set it and forget it” guy? Somewhere in-between?
JD: The thing about Xander is his team around him is very close. Obviously, his father is his swing coach, and his father is an industry guy who has been around the golf industry for a long time, even on the manufacturing side, so he has a deep, thorough understanding of golf equipment. He’s instilled a little bit of that in Xander, who is unique in that he is a deep thinker — he thinks through everything and is very calculated — but he can also go back into “player mode” and is very laid back, much more of an athlete, very even-keeled, very relaxed.
Xander lives in San Diego very close to our test center in Carlsbad. His dad is there as well as Austin Kaiser his caddie. So when we do work, it’s not just Xander showing up. With the whole team there, they’re very collaborative sessions.
He’s not a tinkerer once his bag is set, but with his team, we’re always looking for any small ways we can make him better. Year over year, if you look at his stats and some of the areas of his game where he’s gotten better — like his approach game, that’s an area we’ve worked hard with him on, looking at every club individually, making sure the spin windows, distance, and launch are right.
GolfWRX: With respect to spin, he recently made a ball change, right?
JD: At the Memorial Tournament, he switched into the Chrome Soft X LS. Really, the genesis of that switch was that Xander has been working hard on his fitness and he picked up some clubhead speed and that changed the delivery of the golf club, so we needed to move him into something that had a little less spin.
He had played a lower-spinning ball early in his career and had moved into a mid-spin ball, but we were able to move him into that golf ball, which he really likes because it gives him the ability to flight the ball lower, and he doesn’t feel like he’s lost greenside control. He’s excited about that, and the stats show it was a good fit for him.
GolfWRX: Was it one thing in particular that tipped him off to feeling like he needed to find a way to kill some spin?
JD: Well, he has a launch monitor and is very diligent, and he’ll even take his GCQuad out in practice rounds to ge actual data on course. Through that, we started seeing some spin numbers that were a little high, and that led us back to the test center to do a deep dive. We looked at some solutions, and the golf ball was a natural fit for him — it spun a couple of hundred RPMs less with the irons and just a touch less with the driver, so we didn’t have to tweak much in his bag setup.
GolfWRX: Cool. Well, with respect to that setup, let’s dig into his bag.

(Photo via Callaway’s Johnny Wunder)

Driver: Callaway Epic Speed Triple Diamond (9 degrees, NS setting, 6GF, 6GB)
Shaft: Graphite Design Tour AD BB 7 X (custom black, 45.5 inches, tipped 1 inch, D3)
JD: Xander plays the Epic Triple Diamond 9-degree head. He’s been in a Triple Diamond head for years now. Not doing anything crazy. He’s been in the shaft for a long time. He’s cruising at 120-121 mph clubhead speed, ball speed around 178-180. Launch is around 10 degrees. Spin is around 2,400 RPM. We moved him up a full degree from last year to optimize his driver — he was getting a little bit low on the launch and spinning it a little too much. We felt like if we could get the launch higher and keep the spin relatively flat it would give him more efficient numbers.

3-wood: Callaway Epic Speed Triple Diamond (15 degrees @14)
Shaft: Graphite Design Tour AD DI 7 TX (43.25, tipped 1.5 inch, D3)
JD: He made the move recently…had been in the Mavrik Sub Zero. He found the Epic Speed to be a little easier to launch — it got up in the air a little quicker — but he also felt he could play a flighted shot better with it. Same shaft setup, so it was a really easy transition.


7-wood: Callaway Mavrik Sub Zero (20 degrees @18.8)
Shaft: Graphite Design Tour AD DI 9 X (41.5 inches, tipped 2 inches, D3)
JD: It’s a course-dependant club, as he has a driving iron as well. He likes the 7-wood when the rough is up a little bit thicker as it’s a little bit easier to get through the rough.
GolfWRX: What is it about this family of shafts for him?
JD: He loves those shafts and he’s always played them. He knows how they feel in competition. He’s a feel golfer with a lot of rhythm in his golf swing, and you find with guys like that, they know the feel and how a shaft reacts and they don’t want to change.


Irons: Callaway Apex TCB (4-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100
JD: Xander was instrumental in helping us with the design of these irons. He was very involved in the process from start to finish. We got a lot of feedback from him. He had played the Apex Pros previously. Our R&D team went to him with some ideas with the goal of offering one of the most consistent irons that has ever been played, and with that, we came up with concept of having a removable weight on the back. There’s no plugs in the hosel, from a club building standpoint, it’s easy to replicate that build, there’s nothing that compensates. We can keep the CG in the center, right behind the clubface. From our end, it’s easy to replicate, but it’s also the most consistent and there’s nothing that has to be done to compensate. We worked hard with him on the offset and topline and the bounces and grinds. It’s a direct replacement for the iron he was playing, and it’s now our most popular iron on tour. He had the first prototype set. He was probably the first guy to hit them.
- Loft (4-PW): 22.5, 26.5, 30.75, 35, 38.5, 43, 47 degrees
- Lie (4-PW): 60.5, 61, 61.5, 62, 62.5, 63, 63.5 degrees
- 6-iron spin: 6,600 RPM
- Swing weight: D1.5 (4, 5) D2 (6-P)
- Length: Standard Callaway length

Wedges: Callaway Jaws MD5 (52-10S), Titleist Vokey Design SM6 (56-10 @57), Titleist Vokey Design SM8 (60-06K)
Shafts: True Temper Dynamic Gold Tour Issue X100
JD: The MD5 blends nicely from the pitching to gap. It’s a familiar shape to him. He uses it on a lot of full shots or slightly off-speed shots. He loves the trajectory. It comes out a little lower and he feels he can control the spin a little more.
With the other wedges, it’s mostly a matter of the sole configuration, and we’re working hard to get him something.


Putter: Odyssey O-Works #7 CH Red
Grip: SuperStroke Traxion 2.0 Tour (10 grams)
JD: He works really hard with his putting coach, and they saw with the armlock some really, really consistent Quintic numbers. They saw his launch angles were very consistent from four feet to 40 feet. The numbers were off the charts, and that led him to working with the armlock.
Over at the Scottish Open, the greens were a little bit slower, so that was a little bit tougher. Speed control was tougher, and he felt when he had to hit it harder, he was better with the shorter putter, so he went back to that over the weekend at the Scottish.
But he’s a world-class putter, so it goes to show his whole team has full expectations of helping him reach No. 1 in the world. We’re always going to be working on helping him get better.
The armlock didn’t stick, but it’s been a great training aid. It helps him in his transition from his backstroke to his through-stroke, he tends to get a little bit of lag. The armlock has helped him eliminate some of that.
It may be temporarily shelved, but he’s still working with it as a training tool, and I think he might bring it back. I don’t think it was a one-and-done, because he’s intrigued by it and the numbers are so good.
Joe Toulon, Odyssey Tour Rep, told us this about Xander’s putter earlier this year, “The top line and back tracer lines really work with his eyes. The CH provides him a little bit of toe hang and it matches up nicely with his path and arc. He’s used face-balanced options in #7’s before and will typically only use something with little-to-no toe hang.”
- Loft/lie: 3.5/71.5 degrees (loft adjusted weekly)
- Alignment: Top and tracers in white
- Insert: White Hot
- Length: 34 3/8 inches to end of grip
- Swingweight: D7.5
- Weight: 516.5 gams
- Shaft: Black stepped shaft

Equipment
Odyssey extends Damascus Milled lineup with 3 new putters
Odyssey Golf announced Tuesday that the already popular Damascus Milled putter lineup is getting more options.
Initially launched back in April, only in a Damascus Milled #7 head (in plumbers or double bend configurations), the family grows to four with a One Wide, Two and Rossie S shape, all available in the second limited-edition drop at retail on June 6th.
“Damascus Steel is a beautiful material, and the patterns tell the story, because every one is different” said Odyssey General Manager, Jacob Davidson. “But what stands out is that as beautiful as these putters are, the feedback from Tour has been the exceptional feel of these putters. We wanted to deliver the most premium performance-driven putter we’ve ever done at Odyssey. When you look at this product, we have so much confidence because there is not one thing we’d do different. On this one we really took our time over the last couple years to try to perfect the design.”
Created from a layered construction of multiple steel alloys, this Damascus Steel insert is forged, folded and pressed to create a unique, striking pattern in every piece. Think of it like a fingerprint. Each Damascus construction comes with its own 1-of-1 style pattern. No offerings will ever look the same.
The layered structure, combined with a specialized heat treatment, delivers a finely tuned, highly responsive feel different from other insert materials. The Damascus steel is audibly different compared to other inserts, potentially with slightly more feedback. Odyssey also uses AI-designed back contours to maintain consistent ball speed across the face, blending traditional craftsmanship with modern tech.
Each head in the line is precision-milled from stainless steel and features a blasted silver finish to complement the Damascus insert and sole plates.
With Tour feedback, Odyssey has also developed, in collaboration with Golf Pride, a grip featuring meticulously crafted edges, pistol shaping and a classic modern tour feel.



Equipment
L.A.B. Golf launches new VZN.1i putter
L.A.B. Golf has been the pioneer when it comes to Lie Angle Balanced putters for years now. When you talk to another golfer and zero torque putters comes up, as it will since it is the hottest thing in golf, the first brand out of their mouthes is L.A.B. Golf. Currently their putter line up has something for every golfer, wether your like blades or mallets. But the company has a new creation for golfers that we saw out on tour just a few weeks ago and is now available to us, the VZN.1i putter.

One of the big stories with the new VZN.1i putter is alignment in the form of the shape. L.A.B. has always given us plenty of alignment options in their putters with different line formations and shapes that can be laser etched onto the top of the putter. With this new design they used the shape of the head and the open cavity in the middle to help enhance the alignment for players. These shapes help players lock into their intended line to improve accuracy and concistency.
“VZN.1i was approached formulaically by combining everything we’ve learned from the success of previous L.A.B. Golf models into a familiar mallet shape that’s easy on the eyes and even easier to putt with,” said Cameron Day, Senior Vice President of Product at L.A.B. Golf. “Every L.A.B. putter is engineered to roll the ball on its intended line through Lie Angle Balance technology. With VZN.1i, we took things a step further by simplifying another critical aspect of putting: alignment.”

Like most of the other L.A.B. mallet putters the VZN.1i is machined from a solid block of aluminum and features a 303 stainless steel face insert. Steel face inserts on all L.A.B. putters not only enhance the sound and feel but they improve ball speed for better distance control. The new shaping also offers two ways of picking up your ball, using the sole or the rear flange can scoop up the ball. The company is offering the VZN.1i with a 1.5 degree forward shaft lean or a vertical shaft option in order to fit more golfers. Each VZN.1i is hand balanced and 10 other stages before it is complete and ready to ship. L.A.B. has its custom program where the golfer can select their length and lie but also head color, shaft upgrades, and grips to make their VZN.1i fit them perfectly.

The VZN.1i is available now starting at $499 for stock models and $599 for custom.
Equipment
2026 Edition: Most comfortable walking shoe? – GolfWRXers discuss
In our forums, one user has asked a question sure to interest all sorts of golfers. What’s the most comfortable walking shoe of 2026?
@RobDMB posed the following question:
“Looking for suggestions/recommendations on the currently available most comfortable walking shoes – preferably waterproof. Essentially looking for something comfortable like a running shoe, but with some stability and waterproof for golf. Decent room in toe box as well. Any recommendations are appreciated. Thanks!”
Our members in the forum have been sharing their own recommendations on the best walking shoes that can also survive a number of golf rounds. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- SheriffBooth: “To check all your boxes I’d vote for whichever of the current Nike lineup fits your feet the best. Obviously the Victory Pro 4 and Victory Tour 4 are good enough for the two best players in the world, but the new Pegasus, Next% Tour 3, and Tempo all look really good too.”
- i*windows: “when I had issues with my feet I played in Asics running shoes they were a little bit like the hoka’s above, very comfortable, now I’m back to Ecco shoes which are great.”
- mshills: “Everyone’s feet are different so this will be a long list of lots of different shoes. For me, anything from Ecco’s Biom lineup. Nothing else comes close.”
Entire Thread: “2026 Edition: Most Comfortable Walking Shoe?”
If you aren’t a member, join us in the GolfWRX forums today!
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News5 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment7 days agoDetails on J.J. Spaun’s surprise putter switch
-
Equipment3 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge
