Equipment
Today from the Forums: “Forgiving 18-degree utility iron?”
Today from the Forums, we take a look at a discussion on utility irons. WRXer ‘mark98ca’ is on the hunt for an 18-degree utility iron and has asked fellow members for their opinions on what is the most forgiving option on the market, with a variety of models getting a recommendation.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- Golf64: “Ping Crossover, Titleist U-500 and Wilson staff for me.”
- mootrail: “From the tee, the Srixon Z U45. Forged, butter, soft, and long. The squared-off fat sole is clunky and not the best from the fairway. I’d guess ditto for the U65, but I didn’t like my U85 at the new higher D4 SW. From the fairway, the Cobra King Utility Black One. Large sweet spot forged face and the seven iron length makes center contact and play from the turf a breeze. The sole-turf interaction is the best of any of the many DI / UIs I’ve tried. Of course, you’re going to give up yardage, but there is the full-size one as well. What’s more forgiving? A 20° Utility or higher. Plus if you go up in loft, there are a lot of long and easy SGI / GI irons out there with quite a few making it into tour player’s bags.”
- dekez: “Cobra F6 Baffler. An ultimate utility club. You can hit it like a 5 wood or like a hybrid. From any lie.”
- wam78: “My top 3 that I tried this year are U85, mp 20 hmb and u500. Currently playing the u500 and absolutely love it. It was the best looking to my eye, and it fit my gap better than the other ones.”
- QuigleyDU: “The cobra King Utility irons has been my favorite club the last two years.”
Equipment
Interesting clubs at top of bag – GolfWRXers discuss
In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.
They wrote:
“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”
Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
- scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
- phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”
Entire Thread: “Interesting clubs at top of bag”
If you aren’t a member, join us in the GolfWRX forums today!
Equipment
Members of the Mini Driver Club – GolfWRXers discuss
In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.
@TightFade asked:
“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”
Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
- JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
- ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
- ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”
Entire Thread: “Members of the Mini Driver Club…Check In.”
If you aren’t a member, join us in the GolfWRX forums today!
Whats in the Bag
Chris Gotterup WITB 2026 (June)
- Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g


Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X


Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord
Ball: Bridgestone Tour B X Mindset
Check out more in-hand photos of Chris Gotterup’s clubs here.
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Equipment20 hours agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News6 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment1 week agoDetails on J.J. Spaun’s surprise putter switch
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge

Paul
Mar 26, 2020 at 10:18 am
If you need forgiveness you shouldn’t he hitting an 18* utility club.