Connect with us

Equipment

WRX Spotted: A pair of custom putters

Published

on

This week’s Zurich Classic is all about pairs — that goes for the two-man teams competing for the winner’s check(s), and in the case of notable putters we spotted, a pair of new one-off customs in bags this week: Abraham Ancer’s personal Bettinardi and Danny Lee’s new Scotty Cameron Super Rat.

Let’s start with the Danny Lee’s because there is a LOT going on with that club including first and foremost – it’s one nasty wand:

  • Super Rat head shape with a single sight line
  • The milled (actual) loft appears to be pretty standard for Cameron Putters
  • The hosel has been bent to accommodate Danny’s “armlock” style. This keeps the loft of the head where it should be while forward pressing. This kind of adjustment would need to be made to any standard putter if you were to try the armlock, or else you would deliver negative loft at impact
  • The shaft is LA Golf Shaft OZIK TP — a shaft designed to remove undesirable vibration through the shaft, while also reducing putter head oscillation at impact. Not a surprise considering the number of multi material/graphite putter shafts that are available right now to help improve consistency.
  • Last but not least a SuperStroke Flatso grip installed with the flat part of the grip aligned parallel to the putter face! This isn’t the first time we’ve seen something like this, and it makes sense – Utilizing the orientation of the grip to create greater awareness of the face angle can help players of all skill levels create more consistent results, even tour pros.

Danny has had an interesting golf bag to follow this season with a number of changes coming almost weekly from irons to putters. Maybe this change could help turn his putting around (currently ranked 116th in strokes gained: putting), all while still being inside the top 50 in the FedEx Cup.

Now to Abraham Ancer’s new Custom DASS BBZero Tour Dept. Putter.

  • This putter is based off of the BBZerostyle head with rounded bumpers and a plumbers neck
  • Compared to the BBZero though, the heel is thicker and it could have a slightly shorter blade length (TBD)
  • It has a recessed sight line on the top that runs perpendicular to the sight line in the flange to form a “T.” This is interesting for a couple of reasons including that it looks to be the width of a golf ball, which could help Abraham find the center better. Also as a right-handed golfer, this type of alignment is an indication that he is most likely right-eye dominant and uses the face of the putter to align to the target as much if not more than the flange line.
  • Just like Danny’s above, this putter is also shafted with the LA Golf Shaft OZIK TP — there must be something about that that has more players testing it out.
  • And finally, the grip is the SuperStroke Claw. Judging by the cleanliness of both these grips these are both new to the players and testing will prove what ends up come tournament time.

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

1 Comment

1 Comment

  1. Brad

    Apr 25, 2019 at 8:05 am

    I’m really interested in the new composite putter shafts! But I am putting so well I don’t want to change. Can’t wait to see more info about these and KBS CT putter shafts.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Interesting clubs at top of bag – GolfWRXers discuss

Published

on

In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.

They wrote:

“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”

Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
  • scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
  • phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”

Entire Thread: “Interesting clubs at top of bag”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Equipment

Members of the Mini Driver Club – GolfWRXers discuss

Published

on

In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.

@TightFade asked:

“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”

Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
  • JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
  • ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
  • ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”

Entire Thread: “Members of the Mini Driver Club…Check In.”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Whats in the Bag

Chris Gotterup WITB 2026 (June)

Published

on

  • Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g

Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X

Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord

Ball: Bridgestone Tour B X Mindset

Check out more in-hand photos of Chris Gotterup’s clubs here.

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending