Connect with us

Equipment

Spotted: New Aldila Rogue Silver 130 MSI shaft

Published

on

The official Tour launch of the Aldila Rogue Silver 130 MSI shaft is this week at the 2018 Forth Worth Invitational at Colonial, and we were able to snap a few photos on the range. MSI stands for millions of pounds per square inch, and basically, it refers to how stiff the fiber is — the higher the number, the greater stiffness it has.

Headed to retail later this summer, according to Aldila, the lower-launching, lower-spinning Rogue Silver 130 MSI is the successor to the Rogue Silver 125 MSI.

Per the company, the new Rogue Silver 130 MSI will feature the same tapered butt-counter-balanced design as the 125. The stronger 130 MSI carbon fiber produces slightly lower torque, however, and is the strongest material in a Rogue shaft to date.

Several Tour pros have already made the switch to the new shaft:

  • Jimmy Walker put the 70 TX in his driver for the first time at The Players. He had been gaming the 80 TX in his fairway wood since the Masters.
  • Kevin Chappell has been playing the 80 TX in both his 3 and 5-woods.
  • Martin Flores has put the 70 TX in his driver
  • Chez Reavie put the 60 TX in his driver at the Masters.

We’ll bring you more details as they become available closer to launch. Click here to see what GolfWRX members are saying about the new shaft in our forums.

Ben Alberstadt is the Editor-in-Chief at GolfWRX, where he’s led editorial direction and gear coverage since 2018. He first joined the site as a freelance writer in 2012 after years spent working in pro shops and bag rooms at both public and private golf courses, experiences that laid the foundation for his deep knowledge of equipment and all facets of this maddening game. Based in Philadelphia, Ben’s byline has also appeared on PGATour.com, Bleacher Report...and across numerous PGA DFS and fantasy golf platforms. Off the course, Ben is a committed cat rescuer and, of course, a passionate Philadelphia sports fan. Follow him on Instagram @benalberstadt.

5 Comments

5 Comments

  1. Jamie

    May 22, 2018 at 5:08 pm

    Rogue Silver 125 the best graphite shaft since the ProForce V2. Rogue Max was a POS.

  2. steve

    May 22, 2018 at 4:40 pm

    Just another oven-cured graphite shaft with excess epoxy plastic causing a floppy soggy shaft tip… and trying to fix the problem with higher tensile graphite fibers. SteelFiber shafts and autoclave cured Seven Dreamers shafts are superior.

    • Aaron

      May 22, 2018 at 7:25 pm

      They’re so great, that everyone is scrambling to switch to them. Or…very few players use them?

      • steve

        May 22, 2018 at 11:06 pm

        You really don’t get it…. pro golfers are equipment salesmen and play for pay from the OEMs. They adapt to whatever equipment they are hawking to the gullible masses.

      • steve

        May 23, 2018 at 1:30 pm

        Pro golfers are equipment salesmen and mostly play for pay OEM mass produced junk peddled to the gullible golfers. Oh, and pretty colors sells shafts.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

From the GolfWRX Classifieds: L.A.B. Purple DF3 with Masters cover

Published

on

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @raw10628 has a L.A.B. DF3 putter and Masters putter cover up for grabs.

From the listing: “Some great items here today, time to thin out and make room for next set of gear.  All prices include shipping. 
LAB DF3 Purple 33.5” 68° lie with TPT – $725. LAB Masters release DF3 cover – $150.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules

Continue Reading

Whats in the Bag

Maria Torres WITB 2026 (June)

Published

on

Driver: Ping G440 LST (9 degrees)
Shaft: Accra TourZ Green 5-M4

3-wood: Ping G440 Max (15 degrees)
Shaft: Accra TourZ Green 6-M4

5-wood: Ping G440 Max (19 degrees @18)
Shaft: Accra TourZ Green 6-M4

Hybrid: Ping G440 (23 degrees)
Shaft: Oban Isawa Red Hybrid Shaft 04 Flex 70 Gms

Irons: Srixon ZXi7 (5-P)
Shafts: Aerotech SteelFiber Private Reserve i80

Wedges: Cleveland RTZ (50-MID, 54-FULL, 58-MID)
Shafts: Aerotech SteelFiber Private Reserve i105

Putter: L.A.B. Golf OZ.1i
Shaft: ACCRA Putter Shaft

Grips: Golf Pride Tour Velvet

Continue Reading

Equipment

Game improvement iron as a driving iron? – GolfWRXers discuss

Published

on

In our forums, one user is sharing details of a recent round in which his playing partner was gaming an…unconventional driving iron.

@AbSWFPGA explained:

“Played with a kid the other day who was a good player and he used a TaylorMade qi max hl 4 iron as a driving iron. He hit it off a lot of tees and it was pretty money. I looked up the 4 iron in that set and it’s 18.5 degrees so that would make for a good driving iron in terms of loft. Has anyone done this and could share some feedback? Thanks”

Our members have been sharing their own perspectives and experiences with unique driving irons in the forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Dave33: “I just got a new set of irons, Ping I540’s, and the 4 iron is 19 degrees. That’s basically as strong as the 2 iron in my 30 yr old custom set its replacing and I used to hit that 2 iron off the tee all the time. The I540 4 iron off the tee is an awesome club. ”
  • Santiago Golf: “I have tried this a few times and they always went too high … Never really the stinger height I was looking for. I got a IDEA Pro style hybrid and it was the perfect mid launching club I was looking for.”
  • DircaDelta: “I basically do this with a JPX 925 Hot Metal Pro 4iron (19 degrees). I tried a few driving irons but honestly this probably fits me best due to the shorter length, but it’s still hot and still has a wide sole which is nice. Great off the tee, turf, and punchy shots to lay-up on par 5s or get out of trouble. It has the same shaft as my irons (Modus 120X) so I could probably get more out of it from a different shaft, but it fits what I need in terms of gapping from my 5 iron (JPX Forged) and gapping and launch from my short 5 wood. I think it’s a good (and often cheaper) route so long as you can find one that suits your eye and gapping needs. I don’t like offset so the HMP’s help in the optics department over a “more typical” game improvement iron.”

Entire Thread: “Game Improvement Iron as a Driving Iron?”

If you’re not already a member, join is in the GolfWRX forums today!

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending