Equipment

Tech Talk: Mickelson’s KBS Tour V2 shafts

Published

11 years ago

Feb 4, 2013

Phil Mickelson was vocal in post-round interviews last week about the importance of his change to Callaway’s new Razr Fit Extreme driver, which he said allowed him to be more confident off the tee in his record-setting performance at the Waste Management Phoenix Open. But a look at Mickelson’s stats for the week shows that his iron play was more important to his 28-under total at TPC Scottsdale than his tee shots.

Mickelson ranked T11 in driving distance, averaging 298.8 yards off the tee — about 10 yards more than his 2013 season average. He was also 55th in the field driving accuracy, hitting the fairway 57.14 percent of the time — about 5 percent better than his season average.

However, Mickelson led the field by hitting 87.5 percent of greens in regulation at TPC Scottsdale, a staggering 14 percent better than his season average. He also birdied nine of the 16 par-3 holes, which led to a 9-under score on those holes that was nine shots better than the field average.

Callaway went out of its way to inform golfers that Mickelson’s 9.5-degree Razr Fit Xtreme driver head (adjusted to an open position for an actual loft of 8.1 degrees) is the same one available to consumers at retail. But what consumers will not be able to buy any time soon are Mickelson’s “KBS Tour V2” iron shafts, which he used in his Callaway Razr X Muscleback 4 iron through pitching wedge and Callaway JAWS 52-, 60- and 64-degree wedges.

The prototype shafts are stiffer in the tip section of the shaft (the part closest to the club head) than the x-flex version of the KBS Tour shafts, which is achieved by making the diameter of the shaft larger in that area. The change gave Mickelson the more penetrating, lower-spinning trajectory that he wanted. The shafts are also five grams lighter, which according to KBS Marketing Director Eric Hubble, gave Mickelson back some of the feel that is lost with a stiff-tip iron shaft.

Just how picky is Lefty with his equipment? Last March at the WGC-Cadillac Championship, Mickelson put the original version of the KBS Tour V2 iron shafts in play in his 5 iron through pitching wedge. In May, KBS lead designer Kim Braly was still working with Mickelson during practice rounds at The Players Championship to tweak the construction of each individual short iron shaft. The tweaking lasted until last summer, which is when Braly and Mickelson finally ended their revision process.

Click here to see what else was in Mickelson’s bag at the Waste Management Phoenix Open.

Your Reaction?

LIKE5
LEGIT2
WOW0
LOL0
IDHT1
FLOP0
OB1
SHANK0

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

14 mins ago

Apr 25, 2024

GolfWRX Staff

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?

LIKE0
LEGIT0
WOW0
LOL0
IDHT0
FLOP0
OB0
SHANK0

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

2 hours ago

Apr 25, 2024

Brian Knudson

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Check out the rest of our photos from the 2024 Zurich Classic

Your Reaction?

LIKE1
LEGIT0
WOW0
LOL0
IDHT0
FLOP0
OB0
SHANK0

Equipment

Spotted: Project X Denali hybrid shaft

Published

3 hours ago

Apr 25, 2024

Brian Knudson

Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.

Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.

Check out in-hand photos of Daniel Berger’s full WITB here.

The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.

Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.

Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!