Equipment
Fujikura launches new Ventus TR Blue shafts for 2022 (plus a deep Q&A)
Fujikura’s family of Ventus shafts is undoubtedly one of the company’s best-performing, most popular and best-selling shaft lineups ever.
Back in September 2018, Fujikura launched the Ventus Blue shaft on the PGA Tour, finding immediate success for its ability to create speed without sacrificing stability. The secret sauce was a technology called “VeloCore,” which is a multi-material construction that uses ultra-stiff Pitch 70 Ton carbon fiber to increase stiffness.
The Ventus Blue allowed players to hit the center of the face more often due to a reduction in twisting and droop on the downswing.
As a mid-launch and mid-to-low launch shaft that provided speed and stability, the Ventus Blue fit the swings of most players. But, of course, there was demand for other models both in the market and on Tour. So, in September of the following year, Fujikura launched the Red (higher launch/higher spin) and Black (lower launch/lower spin) versions to appeal to the needs of different swings.
Fujikura’s arsenal of Ventus shafts allowed nearly any golfer across the swing spectrum to fit into one of the three options, including top tour players.
Although the Ventus shafts remain in the bags of tour players and perform well in the market, Fujikura has been working behind the scenes over the last several years to enhance performance.
After using its in-depth ENSO analytics and working closely with tour players, Fujikura has developed a new Ventus TR Blue shaft. Like the original Ventus Blue, the TR version is a mid-launch shaft, except it’s stiffer in the mid/handle section to improve stability and consistency of strike.
While VeloCore is still used throughout the Ventus TR shaft, the new construction features “Spread Tow” fabric in the butt-end section to increase torsional stiffness. Spread Tow, essentially, is a checkerboard-like design that weaves fibers together to increase strength and reduce weight. According to Fujikura, the torque is 10 percent stiffer in the section that uses this design.
Fujikura’s Product Marketing Manager, Spencer Reynolds, explains exactly what Spread Tow is and why it’s effective
“Essentially, there’s a standard carbon weave and then there’s a Spread Tow carbon weave. What a Spread Tow does is it takes all these individual strands of carbon and irons them flat into a tape, and then weaves those over-under, over-under almost like a checkerboard pattern. So there’s very little space for resin to accumulate, you get super low resin content, and then you also get a lot of strength in varying directions. It can take pull and load in multiple directions. Another benefit is that it’s super lightweight. You’re getting an incredible amount of strength, in an ultra-lightweight package.” (Read the Q&A later in the piece for way more insight from Reynolds on the Ventus TR).
For golfers, the new Ventus TR construction will lead to more stability at impact and during the backswing-downswing transition. In comparison to the original Ventus Blue, the Ventus TR will play slightly stiffer for lower spin but not quite as stiff as the Ventus Black.
Debuting a slightly new look, the Ventus TR has a lightweight phantium paint finish that glistens in the sunlight, and it has a gold “TR” block. Also, if you look closely at the butt-end section of the shaft, you can visibly see the Spread Tow woven technology. Fujikura has confirmed that the checkered design isn’t just a graphic — that’s a look into the real technology through the paint finish.
Described by Fujikura as a mid-launch, low-spin shaft, the Ventus TR comes in the following options: Ventus TR Blue 50 (R2, R and S flex), Ventus TR Blue 60 (R, S and X flex), Ventus TR Blue 70 (S and X flex) and Ventus TR Blue 80 (S and X flex), each of which are available at 46 inches.
Fujikura’s new Ventus TR Blue shafts will be available at over 600+ authorized retailers starting Feb. 1, 2022, selling for $350 apiece.
Fujikura Ventus TR: The inside story
For more on the Ventus TR, how it was designed, what it’s designed to do, and what the “TR” actually stands for, we talked with Spencer Reynolds, Product Marketing Manager at Fujikura.
Tursky: Simple question to start, what exactly is the Ventus TR shaft? What’s different about the new design?
Reynolds: Yeah, so on our end, for the last three years, really, people have been asking us what’s going to be next for Ventus, right? That’s kind of the curse and the blessing of having a really successful part. And the cool thing about Ventus is that it’s successful from the amateur level all the way to the PGA Tour. So you get tasked with these three things. 1) They want something new, 2) it needs to be better and 3) don’t change it. It’s kind of an awkward recipe to make new product.
So what we find is it’s a bit of a three-step process. It starts with taking a successful part and profile, and let’s listen to feedback. So we talk to tour pros, we’ll talk to charter dealers, we’ll talk to players and say, ‘Alright, if there was something about a particular profile that you’d want to change or enhance, what would it be?’
The luxury that we have is we take that feedback, and then we can kind of pair that up with our ENSO analytics. We have thousands of lines of different data and combinations of shaft builds, and how that interacts with different players, so we can pretty confidently say if we take this feedback, we make this change here, we make this section different, we make it softer or stiffer, whatever it is, we can look at an algorithm and look and past data and get a pretty good feel for how this is going to play out.
Then step three is, we find the right recipe, build prototypes, test it to death, and then roll it out to market. And that’s the super simplified version of it.
We got really nitpicky with Ventus, and one of the things we realized was that VeloCore technology is still an incredibly stable platform. So combine that incredibly stable core, incredibly ultra-stiff tip section, we have a lot of stability there. But what ENSO analytics showed us was, when a shaft goes into transition on the downswing, especially at higher swing speeds, but really for all swing speeds, that’s where a shaft takes on a lot of stress – unwanted stress, anytime there’s a quick change in direction. And we see that happen in the mid-handle section. That’s really where that occurs a lot.
Anytime we see that inconsistency in a shaft build, it can lead to unnecessary twist or unwanted twist. We want this piece from grip to tip to be as consistent as possible. So you start to look at specific sections now, and if this is a weak section or a section that can be compromised, how can we beef it up. Easy thing is we strap a bunch of material to it, right? But that doesn’t work because now you’re compromising swing weight, overall weight, and in a profile like a mid-launch, low-spin profile shaft like this, you’re really starting to compromise feel. You’re starting to push it much more into that handle-stiff, rebar, high swing speed space. This can live there with stiffer flexes and higher weights, but in that mid-low spin range, you want to maintain some of that feel.
So it leads us down a rabbit hole, how can we source new composites? How can we source new materials? How can we solve this problem? Well, we integrated a new Spread Tow carbon fabric.
Essentially, there’s a standard carbon weave and then there’s a Spread Tow carbon weave. What a Spread Tow does is it takes all these individual strands of carbon and irons them flat into a tape, and then weaves those over-under, over-under almost like a checkerboard pattern. So there’s very little space for resin to accumulate, you get super low resin content, and then you also get a lot of strength in varying directions. It can take pull and load in multiple directions. Other benefit is that it’s super lightweight. You’re getting an incredible amount of strength, in an ultra lightweight package.
Now we get away from that idea of compromising swing weight or overall weight, but when we measure this – we have a proprietary measurement system where we don’t just look at torque overall. We look at torque in every section of the shaft specifically. So what is the handle torque? What is the mid torque? What is the tip torque? And we compare that section to a Ventus Blue, and it jumps the torsional stiffness almost 10 percent in that specific section, which is a big chunk.
Tursky: What do these benefits equate to in real life for a golfer?
Reynolds: The basic way to look at it is, you’re increasing consistency by that much more by increasing stability that much in a shaft. So any increase we see in stability, especially getting into double digits, it’s a huge gain.
What it really gives players, though, is you’re not really compromising player feel. So you’ve increased torsional stiffness in that section and made the shaft that much more consistent, without it feeling boardy or stiff in a particular section.
Tursky: So, in the handle section, you can see a checkerboard style graphic. Those are just graphics, right? You’re just highlighting the technology underneath?
Reynolds: No, you’re seeing the material. That’s the material showing through, so you can actually see that under the Ventus decal, especially in the sunlight. When you see the checkerboard popping at you, there’s just a touch of paint over it. That’s the actual material on the part. So you will see some cool cosmetic changes on this, you will see a kind of sparkly blue finish that you can see when we’re in the sunshine. It’s got the added “TR” graphic to go in the label.
Tursky: What does the “TR” stand for?
Reynolds: It really doesn’t have a necessary meaning, but it has cool company history. We’ve had a TR part in the past in the Speeder TR. So, to us, it kind of means a lot of different things. In the past we’ve called the TR, we’ve called it tour rated, torsionally reinforced, we’ve come up with a million different acronyms, but truthfully it’s just kind of a brand name for us that has cool company history.
Tursky: I always thought it was “tour ready”…
Reynolds: Yeah, tour ready. We’ve gone through a litany of things. But for us, it’s kind of just a nod to our company history. And it helps it stand out just a little bit, too. As easy as the Ventus 2.0 would have been, we wanted to add some substance with it with a cool nod.
Tursky: In general, if I’m hitting an original Ventus against a Ventus TR, what are some things I can expect?
Reynolds: Yeah, you’ll start to see some slight changes. We have integrated some stiffness to the profile. I would say that apples-to-apples, compared to a Blue, you may see some lower spin, certainly not as aggressive as Ventus Black. But it’s player dependent. We can look at a player profile on a spec chart and have a good idea of how it’s going to perform, but if you really want to know how it works for you, it’s always best case scenario to get fit, try it, try different combinations, and see what really sings for you.
Tursky: So, at least for now, there’s just a TR Blue?
Reynolds: There is. I know what your next question is. I’ll tell you this. Anytime we integrate a new technology that we see great success with, we absolutely explore it into other profiles. It’s absolutely in the consideration. And the cool things really from a design perspective with the TR, and we talked about this a little bit in a product last year, which was Speeder NX, we talked about a thing called variable torque. And we’ve really done a lot in that design space that we’re targeting these specific sections. What we found is that really is a powerful lever in adjusting shaft performance. Really targeting specific sections and talking about twisting profiles versus just E.I. profiles, whether that’s adding or subtracting material. Whatever it is, that idea of varying toque in specific sections is a space that we feel we’re just dipping our toe into and we’re really excited to run with. We’ve seen really cool results so far with the Ventus TR and we’re psyched about it.
- LIKE63
- LEGIT3
- WOW5
- LOL1
- IDHT2
- FLOP0
- OB0
- SHANK3
Equipment
Spotted: Project X Denali hybrid shaft
Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.
Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.
The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.
Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.
Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!
- Check out the rest of our photos from the 2024 Zurich Classic
- Check out in-hand photos of Daniel Berger’s full WITB here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Daniel Berger WITB 2024 (April)
- Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X
6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X
Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)
Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)
Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0
Grips: Golf Pride Tour Wrap
Ball: Titleist Pro V1
Check out more in-hand photos of Daniel Berger’s clubs in the forums.
- LIKE3
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK0
Equipment
Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans
What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.
At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.
Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.
Rory McIlroy
Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Alex Fitzpatrick
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Daniel Berger
Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap
Rasmus Hojgaard
Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC
Alejandro Tosti
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4
James Nicholas
Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet
Kevin Streelman
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet
Sang-moon Bae
Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet
Russ Cochran
Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align
MJ Daffue
Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align
Check our more photos from the Zurich Classic here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Pingback: Limited-edition Fujikura Ventus TR Blue Patriot Edition shaft announced - Fly Pin High
Pingback: Limited-edition Fujikura Ventus TR Patriot Edition shaft announced - Fly Pin High
Pingback: GolfWRX Members Choice presented by 2nd Swing: Best graphite wood shaft of 2023 - Fly Pin High
Pingback: GolfWRX Members Choice presented by 2nd Swing: Best graphite wood shaft of 2023 – GolfWRX
Pingback: Axiom: Fujikura’s all-new iron shaft with VeloCore - Fly Pin High
Pingback: Axiom: Fujikura’s all-new iron shaft with VeloCore – GolfWRX
Pingback: Rounding out the lineup: Fujikura Ventus TR Red, Black – GolfWRX
Pingback: Here’s why Jordan Spieth switched into a new Fujikura Ventus TR Blue shaft at Pebble Beach – GolfWRX
Pingback: Tour Report: 9 burning gear topics from the 2022 American Express – GolfWRX
Skip
Jan 20, 2022 at 1:50 pm
“the torque is 10% stiffer”? that makes no sense. Also stiffer doesn’t always equal lower spin.
Pingback: Photos from the 2022 American Express – GolfWRX
John
Jan 17, 2022 at 11:47 am
Can we expect to see a price reduction on the original Ventus blue then? Or is the old model going to stay the same price as this new model
nicelife
Jan 17, 2022 at 11:24 am
Weldon back!