Connect with us

Equipment

2021 Titleist Pro V1 and Pro V1x: Continuing the pursuit of the perfect ball

Published

on

The Titleist Pro V1 is far and away the best-selling ball in golf, and for 2021, the engineers have delivered on their promise to never stop trying to make the best better with the introduction of the all-new 2021 Titleist Pro V1 and Pro V1x golf balls.

How do you make the most trusted golf balls better?

When the designers and engineers at Titleist are looking for feedback, they go right to the top—that means the best players in the world. Engineers seek to find out not just what they like about their current golf ball, but what if anything can be improved upon.

After lengthy discussion and research with the best golfers in the world, improvement came down to three factors.

  • Greater spin and softer feel
  • More control with a higher apex
  • Distance, but not at the sacrifice of the other two factors

By combining these wants from golfers, together with new and proven technologies, Titleist is giving golfers what they believe to the very best golf balls the company has ever produced, and players agree. 

“When a golfer chooses Pro V1 or Pro V1x, they are choosing absolute performance. Our R&D and Operations teams have spent years engineering new technology into each and every component of 2021 Pro V1 and Pro V1x. When it comes to the performance and quality of these products, we will continue to go to every length possible to help golfers play their best and shoot their lowest scores.” – Jeremy Stone, Vice President, Titleist Golf Ball Marketing.

2021 Titleist Pro V1 technology inside and out

Just like with golf clubs, engineers don’t focus on just one performance factor when designing a golf ball. It’s about bringing each component together to have it perform at the highest level, and for a golf ball, that usually means designing from the inside out. However, with the 2021 Pro V1 and Pro V1x balls, it actually worked the other way around.

New Spherically-tiled Tetrahedral Dimple Designs – Let me start by saying I don’t come up with these names, this is all about engineering. The Pro V1 features a new 388 dimple layout, while the Pro V1x has 348. Both patterns have been optimized for each golf ball model’s specific characteristics to maximize distance and flight consistency.

To make it easy to remember, the Pro V1 is intended to provide a penetrating trajectory while Pro V1x will fly higher.

It’s important to note that this is the first totally new dimple redesign of the Titleist Pro V1 golf balls since 2011, and since that time the Titleist R&D team has gone through the painstaking process of designing, manufacturing, and tested more than 1,900 aerodynamic patterns—including no less than 60 different iterations of the new 2021 Pro V1’s 388 dimple layout and more than 30 versions of Pro V1x’s 348 dimple design as per Titleist.

“It takes years of work – we’ve been working on these new packages for almost a decade – but it is that commitment to research that ensures each golf ball is optimized to fly at its longest and most efficient trajectory.” – Mike Madson, Titleist R&D’s Director of Aerodynamics & Research Engineering

Reformulated 2.0 ZG Process Cores – As mentioned off the top, at the core of every golf ball is, well, a core (see what I did there?) and each core has to designed to deliver maximum ball speed and consistency shot after shot. The ZG process ensures that through production, each solid core Pro V1 and dual-core Pro V1x is going to deliver distance and soft feel.

Fast High-Flex Casing Layer – The casing layer between the core and the cover adds speed and lowers spin on long game shots. This casing layer is comprised of a highly-resilient, high-speed (another way of saying firm) ionomer which was originally developed for the Pro V1x Left Dash—and like with any piece of golf technology has trickled its way into other products in the line where it can be used to increase performance variables.

Softer Cast Urethane Cover – To complete the package and deliver on the number one thing players requested with the new golf balls, the new formula for the cast urethane cover is the softest formulation Titleist has ever used the Pro V1 and Pro V1x balls to increases spin around the green and offer players more control. 

Price and availability

The new 2021 Pro V1 and Pro V1x golf balls will be available in golf shops starting January 27.

Both the Pro V1 and Pro V1x will be priced at $49.99 and be available in white with play numbers 1-4 and  5-8 along with the same numbers (00-99) through custom. High optic yellow will also be an option but only with the play numbers 1-4.

Your Reaction?
  • 118
  • LEGIT9
  • WOW1
  • LOL3
  • IDHT1
  • FLOP3
  • OB2
  • SHANK12

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

7 Comments

7 Comments

  1. Pingback: GolfWRX Members Choice: Best golf ball of 2022 (best tour ball) – GolfWRX

  2. Pingback: GolfWRX Members Choice: Best golf ball of 2021 – GolfWRX

  3. Ryan

    Jan 21, 2021 at 5:53 pm

    I’m so confused about these balls—when they first debuted, the ProV1 was the softer, higher spinning ball, while the X was firmer and spun less. Now it seems the X spins more and launches higher. I did a trial on my GCQuad and the X spun around 500-700 rpm more on a 75 yard shot. Am I totally wrong?

  4. Jbone

    Jan 21, 2021 at 11:21 am

    I hope it’s as soft as the bridgestone tour xs. Feel is the only reason I switched from prov1 over to Bridgestone

  5. Gunter Eisenberg

    Jan 21, 2021 at 10:32 am

    We’ll see what Rick Shiels has to say. He recently did a performance comparison between the original 1.0 Pro V1 from 2000 vs the 2020 version. Other than the more durable cover for the 2020 version there was little performance difference between the two.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Rasmus Højgaard WITB 2024 (April)

Published

on

  • Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.

Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX

3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX

Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX

Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130

Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X

Putter: Odyssey Ai One Milled Eight T DB

Grips: Golf Pride MCC

Check out more in-hand photos of Hojgaard in the forums.

 

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Rory McIlroy WITB 2024 (April)

Published

on

  • Rory McIlroy what’s in the bag accurate as of the Zurich Classic. 

Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X

Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)

Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour

Ball: 2024 TaylorMade TP5x

Grips: Golf Pride MCC

Check out more in-hand photos of Rory McIlroy’s WITB in the forums.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Spotted: Nate Lashley’s Ping PLD “Wolverine” putter

Published

on

Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.

This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.

Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.

Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.

Your Reaction?
  • 3
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB2
  • SHANK2

Continue Reading

WITB

Facebook

Trending