Connect with us

Equipment

Tour Insider: Fujikura Ventus – The best “Fuji”shaft ever?

Published

on

Now that the tour season has come to a conclusion for this year, I wanted to take a look at something I found quite fascinating for a few different reasons. It’s not every day you see a club component (or “part,” as the guys on the trucks like to call it) that has had such an evolution as the Fujikura Ventus line.

The thing that makes Ventus go is VeloCore technology—that’s the “what” of the Ventus story.

But what exactly is it?

Well, it started as a tour-driven concept. Fujikura was using pitch 70 ton in the R&D “ENSO” concept shafts to study the influence of torque on performance.

A few background notes

P = Pitch = derived from earthy carbon-based materials like plants, crude oil, and coal.

70 ton – Standard modulus is 24ish, then you have intermediate, high (ex: T1100) and ultra-high (Pitch 70 Ton).

  • Ultra-high starts around 60 ton

The higher the tonnage the higher the stiffness.

At a certain point, Fujikura tested it at full length to push it as far as they could, and with the help of ENSO, they had a eureka moment. Engineers found that with this composite makeup they had a shaft that had the stability to increase center face contact frequency, all while dialing up speed. Boom! VeloCore was born!

It was over two years ago at Napa that the Fujikura Ventus Blue made its tour debut. At the time, other shaft manufacturers had launched very competitive product—Mitsubishi was very successful with Diamana and Tensei, Graphite Design with its Tour AD line and Project X HZRDUS was going strong. Needless to say, Ventus dove right into the middle of a very crowded swimming pool.

However, since the golf world opened back up, Ventus has seen momentum on tour that has been unique—in particular, the Ventus Black shaft.

  • Average number of Ventus wood shafts in play before shutdown = 24.46
  • Average number of Ventus wood shafts in play after shutdown = 32.9
  • 34.7 percent growth after season resumed

In the shaft game, that’s a huge leap, and if you could nail it down to one particular shaft, it would be the Ventus Black.

But why? What is it about that shaft that sparks the interest of so many players including Rory, Fleetwood, Kuchar, Sergio, and DJ?

Check out this list of notable players who switched into Ventus Black

  1. Rory McIlroy (driver)
  2. Justin Rose (driver)
  3. Dustin Johnson (driver (at times), 3-wood)
  4. Sergio Garcia (won) with Black in all three woods and in the driver went to a 60-gram profile for the first time in years
  5. Tommy Fleetwood now plays it in driver, 3-wood, and 7-wood
  6. Matt Kuchar (driver)

I  had a chance to chat with Pat McCoy (Fuji Rep on Tour) and get his opinion. This is what he had to say.

JW: If you could pinpoint one aspect of Ventus that is unique what would it be?

PM: The ability to keep the head more stable through impact regardless of head CG. At the speeds these guys are swinging, you need stability to maximize it.

JW: What is important to the guys on tour as a general rule, speed or stability?

PM: In years past, I would have said stability, but now it’s all about speed. We can fix the club to be built for stability after we get the speed.

JW: What about the Black has been so attractive versus the Blue or Red?

PM: The Black due to it being ultra butt stiff and it allowed fitters to increase loft and it will still be low in spin, plus it was a part that we know more tour players would want

JW: Is it fair to say that in some cases, certain profile heads just match up with really well certain shafts?

PM: It’s fair to say that certain swing styles match up to EI profiles but you still need to optimize CG and loft for impact location.

Over the year, I spoke with multiple fitters and tour techs on Ventus, but this comment was the one that really struck a chord as to the nitty-gritty of what makes this shaft unique especially on tour.

“Fuji hasn’t cracked the code they have destroyed it. The Ventus Black specifically has an integrity that I haven’t seen much of. Its not often that we get a tour part at 60G that gives the player everything they get at 70G as far as dispersion but in addition gives them more speed. 9.9/10 there is some kind of trade-off going up or down in weight, this shaft asks the player to sacrifice nothing. “You get what you get” is the best way to describe it, call it stability, efficiency whatever you like but players are getting perfect feedback from this thing. If a player has a left tendency, it goes that way, if it’s right it goes that way. It May seem like something negative but it’s not, feedback and predictability are paramount for the best players in the world, and as a fitter, once we know there are zero surprises, we can dial it in and the ownership falls squarely on the player. That’s how they want it. No tricks.”

The data supports the momentum. I had a chance to chat with PGA Tour stats wizard Rich Hunt on two specific test cases that paint an interesting story on what happened when Player A and Player B switched into Ventus Black. It needs to be said that the shaft is one piece of the puzzle, it’s the combination of the fit, the head, face angles, swing weights, etc. Nonetheless, there are some interesting data points.

PLAYER A (10 tournaments total: 5 before Ventus and 5 after)

*Carry Efficiency = Carry Distance / Club Speed

As you can see he is not only swinging a shaft at least 15G lighter than before, he also improved his spin, launch, carry, and accuracy. Counterintuitive to what you would think going to a lighter shaft. Point is swing speed and ball speed remained constant (AKA Effort) and with everything else being equal found a setup that maximized that effort by a significant amount.

PLAYER B (4 tournaments before and 2 after)

The story here is pure speed. The player, who was in a heavier profile previously was able to go down to a 60-gram profile found ridiculous (at the tour-level) upticks in swing speed, ball speed, launch angle, and max-height all while reducing spin. Now accuracy versus the field was sacrificed a bit, however, the 8-12 yards increase in distance is a worthy gamble. That’s a full club shorter.

What did we learn?

First of all, Ventus is one of many phenomenal shafts on the market. However, Fujikura has found something to run with. It’s the ability to offer a tour part at a true 60-gram weight class, all while giving players the same stability aspects of 70 to 80-gram shafts.

Usually, less weight means more speed and potential loss of accuracy. Ventus Black especially has offered more speed and improvements in dispersion. That’s unique.

I also spoke with some colleagues on the inside at Fujikura about what is to come, and from the sounds of it, they have big plans to extend tour offerings even further. Sub-60 Ventus Black? Ventus for the long shaft players? a TX? We shall see. When the tour asks, Fuji has a knack for responding quickly.

To compete in the shaft game, you constantly have to make breakthroughs, even in the most tucked of corners. The crew at Fujikura did something special here, and there is no disputing that now.

Quick Fujikura stats

General Fujikura shaft brand Darrell count (YoY increases – not Ventus specific, all Fuji shafts)

  • 20% increase in driver count
  • 7% increase in wood count
  • PGA Championship – 28% increase
  • WGC FedEx St. Jude Classic – 40% increase

Ventus Brand Darrell count YoY increases

  • Ventus – 219% increase from 2018/19 events to 2019/20 season events which were played. (This excludes events on the 2019 calendar but not played in 2020 due to COVID-19 season)

 

 

Your Reaction?
  • 212
  • LEGIT26
  • WOW19
  • LOL4
  • IDHT3
  • FLOP1
  • OB1
  • SHANK18

14 Comments

14 Comments

  1. Pingback: Fujikura launches new Ventus TR Blue shafts for 2022 (plus a deep Q&A) – GolfWRX

  2. Donn Rutkoff

    Dec 24, 2020 at 2:58 am

    I’m 66 yrs old. I need to swing a senior or Taylormade M flex on 3 wood and driver. Is there any reason for a guy like me to shell out big money for these wonderful new shafts designed around the needs of stiff and x stiff? Is a senior flex driver shaft of the lastest invention really any better than a senior flex shaft of last 5 or 7 years? I swing a UST Recoil F2 driver. A Matrix Ozik x-con M flex in a TM Burner Superfast 2.0 three wood. (I know, the only way to tell is to hit some shots.)

  3. TL

    Dec 23, 2020 at 10:16 pm

    I’ve had the Blue for about a year. Loved it so much I put o e in a 3 wood. I have also enjoyed the speeder line, but as mentioned above, there’s something special with the Ventus. It is by far the smoothest feeling shaft I’ve hit or owned!

  4. boydenit

    Dec 23, 2020 at 6:49 am

    What country is Ventus produced in?

  5. Larry Legend

    Dec 22, 2020 at 2:52 pm

    Don’t buy the hype of the Taylor Made shaft called “Ventus.” These are not the real thing, have softer butt/tip sections. These OEM’s should be stopped of false marketing their shafts in a watered down version just to sell a SIM.

    • Dugan

      Dec 23, 2020 at 3:13 pm

      Uhhh all of us on wrx know that already, sir.

    • Nihonsei75

      Dec 23, 2020 at 4:59 pm

      When I walk past Your driver ball to check my yardage from my 3wd ball in the fairway, don’t remind me how my Ventus is not real. Happened all year, minus the pessimistic and talk down commentary!

  6. Bladehunter

    Dec 22, 2020 at 9:08 am

    Red is the best kept secret in golf. If you’re a guy or gal who doesn’t launch it high. But what’s to get it up and keep spin management, try one. You’ll be shocked.

  7. ProjectX

    Dec 21, 2020 at 11:17 pm

    I would hope that the latest shaft by any brand is their greatest ever. If not, what the hell are they doing?

  8. Mower

    Dec 21, 2020 at 6:55 pm

    Any coupon codes for 50% Off the Ventus?
    Do they have payment plans?

    • Dugan

      Dec 23, 2020 at 3:16 pm

      Peoples had a black Friday sale that included adapter and grip for $280. Unless you luck out on ebay, they sell for 350

  9. big daddy j

    Dec 21, 2020 at 4:00 pm

    I went from a tensie pro white, which I loved, to the ventus black. Actually went from 60g in the tensei TX to a 70 in the ventus X. Can’t believe how much smoother and easier the ventus has been to hit. It’s very stable and it sounds like a cracking of a whip. It’s been a real joy to play with. Going to try to grab a Ventus blue for my fairway wood soon

    • Nihonsei75

      Dec 23, 2020 at 5:06 pm

      Blue is solid in 3wd and Hy, even without the Velocore. Not at Your flex level I’m sure and with that aside, I’m loving every hole swinging all out or choking down and dialing in shot shapes on tight fairways and long Par 3s. Can’t speak for the “Real” w/Velocore though without it I’ve been enjoying the game!

  10. cody

    Dec 21, 2020 at 1:17 pm

    Love the blue..

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 22
  • LEGIT1
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK3

Continue Reading

WITB

Facebook

Trending