Connect with us
2021-callaway-x-forged-irons 2021-callaway-x-forged-irons

Equipment

2021 Callaway X Forged CB, UT, and Apex MB irons launched

Published

on

Callaway Golf introduces the new 2021 X Forged CB, UT, and Apex MB irons.

The players iron category is the one where technology isn’t the big-ticket item in the conversation. Tour players and top amateurs alike prefer reliability over distance and forgiveness. Look into a good number of our tour pictures, and you will see countless bags with a one-piece forged cavity or muscleback irons.

Over the past four-to-five years, many OEMs have tried to integrate new tech into those irons (i.e. PXG Gen 3 T, TaylorMade P760, and Titleist AP/T100). All of these are multi-material players irons that were designed for the tour and have performed extremely well for a good number of players (Spieth, Jason Day, Zach Johnson, etc).

So what could make that idea better? The above examples all perform to the highest standard on tour and in the retail space…

Well, according to the team at Callaway, the ability to fine-tune for every player was the best place to start. 2021 callaway x forged irons

More photos and discussion in the forums.

2021 Callaway X Forged CB

2021-callaway-x-forged-cb

The Goal: To build a tour performance iron that offers the reliability of a one-piece forging while adding technology to offer enhanced forgiveness and the ability to fine-tune each player to exact, optimized specifications.

The Tech Story: The new 2021 Callaway X Forged CB is constructed from a forged 1025 carbon steel chassis and incorporates a multi-material weighting system to manipulate head weights without effecting exact CG placement.

2021-callaway-x-forged-cb

Beginning with the body, the housing of the hollow body design has the addition of external tungsten (standard at 17 grams) weighting system that can go up or down in weight depending on the needs of the player. The idea being that now Callaway has the opportunity to fine-tune swing weight without adding weight to the inside of the hosel, which is a common practice. The issue with that is it can adjust the CG of the golf club, resulting in inconsistencies throughout the set.

With head-specific MIM internal weight out towards the toe, Callaway was able to not only ensure the CG is dead nuts where it needs to be, but it also gives engineers the ability to tailor each weight (density and shape) specific to each head. In the past, internal weights were stock across the set, which can alter the consistency of the head. In this case, each head weight is dialed and cut specifically to match each clubhead.

With a hollow body design (although not taking it as far as the players distance category) there is a level of speed mitigation that is needed to help the best players in the world not hit it too far. Yes, that statement is correct. At the tour level, control, workability, and consistency will always hold a much higher priority than distance. With the 17-4 Tour Tuned faceplate, Callaway focused on adding perhaps a very small percentage of speed off the face but more to optimize the occasional mis-hit than anything else.

2021-callaway-x-forged-cb-1

What you have now is a face that will offer maybe two percent more speed off the face and an iron that is five percent more forgiving. In real terms, that’s maybe a couple of yards more distance out of the middle and 4-5 yards more carry on a center heel or toe strike. That’s it. Doesn’t sound like much, but for better players, the combination represents the difference between carrying a bunker or hitting it four feet closer to your intended target.

At the elite level, it’s in that nuance that makes or breaks an iron.

Optics/Feel

The shaping still holds consistent with the 2018 X Forged line—slightly longer blade length than its Apex CB sibling, thin top line, and medium-to-narrow sole. Turf interaction and a softer-than-normal feel were the benchmarks that make the ’18 X Forged popular. However, the 2021 version took it a bit further with a squarer leading edge and a bit more bounce based on Tour feedback. The overall impact experience will be a bit “crisper” based on early testing with Callaway staffer Kevin Kisner.

Tour Response

“Very positive,” according to tour manager Jacob Davidson. “We have multiple staff players testing and/or putting them in play including Na, Kisner, Gooch, Garnett, and a few others.” … “Players are liking the meatier feel at impact and the added forgiveness all while keeping to what they can expect from an X Forged profile.”

2021 Callaway X Forged Forged CB specs

External weighting options for fitters and builders only: Light 12 G, standar 17 G, heavy 22 G 

Loft/Lie/Offset

  • 3: 20/60/.135
  • 4: 23/60.5/.130
  • 5: 26/61/.125
  • 6: 29/61.5/.115
  • 7: 33/62/.110
  • 8: 37/62.5/.105
  • 9: 41/63/.095
  • PW: 45/63.5/.090
  • W: 50/63.5/.085

Stock steel shafts: Project X IO

  • R (105G) S (110G) X (115G)

Stock graphite shafts: Mitsubishi MMT 

  • R (85G) S (95G) X (105G, Custom Only)

Grips: Golf Pride Z

Pricing/Availability

  • $200/club
  • Pre-sale: 10/22
  • Retail: 10/29

More photos and discussion in the forums.

2021 Callaway Apex MB

2021-callaway-apex-mb-irons-1

The Goal: Tunability in a muscle back iron. The best players in the world require precision all while maintaining consistency set to set. Callaway wanted to offer this at the highest level.

The Story: The new 2021 Callaway Apex MB is forged from 1025 carbon steel with a classic shape that is similar to the 2018 but with a slightly narrower sole and less offset. 20V grooves ensure optimal spin control in and out of the rough. The chrome-plated 2018 version now has been “brushed” to reduce glare, which is becoming a more popular option.

2021-callaway-apex-mb-irons-1

External tungsten weighting (standard at eight grams) in a muscle back iron isn’t the newest idea ever, but with new technology and a better understanding of precise CG locations, Callaway wanted now to be able to maintain the exact DNA of players set regardless of a grip change, shaft change, etc.

Sounds like a trivial reason to base a new iron on, but in the case of the PGA Tour, it’s not trivial at all. Under normal circumstances, when a player loves a set but wants to make a tweak here or there, it can alter CG and swing weight rather quickly. For example, if a player makes a change into a new grip, it most often leads to a swing weight change resulting in the tour reps either having to add weight to the hosel to match swing weight, add lead tape (awesome) or build a brand new set.

The new Callaway Apex MB gives builders and players the ability to simply use the removable back weight to get the spec back to square skipping common steps and ensuring consistency.

2021-callaway-apex-mb-irons-1

Optics

From a shaping perspective, the new 2021 Callaway Apex MB has a few tweaks from its predecessor—slight offset reduction, brushed satin finish, a slight reduction in the top line, modified height in the toe, and the obvious weighting port in the back.

As mentioned in my article about the TaylorMade P7MB, it’s never the goal to completely reimagine a muscle back iron rather maintain predictability, add small tweaks for optics and turf interaction all while maybe adding in 1 or 2 percent of forgiveness, launch, or speed. That’s it.

2021-callaway-apex-mb-irons-1

Tour Response: Since the early prototype was released in late 2019 to a small number of players, the curiosity around the new 2021 Callaway Apex MB has been active. Players were excited to get their hands on them, and since seeding began, players have been switching them in rather quickly. If anything players are loving the fact that the DNA of a Callaway blade is there as well as in some cases increased launch and a bit more forgiveness.

Young Callaway staffer Akshay Bhatia had this to say

“The shaping and feel of these new irons are unbelievable. Center strikes are exactly what you want to feel and I’m loving how they get through the turf. They are simply the best feeling irons I have ever put in the bag.” 

2021-callaway-apex-mb-irons-1

2021 Callaway Apex MB specs

External weighting options for fitters and builders only (light 4G, standard 8G, heavy 8G)

Loft/Lie/Offset

  • 3: 20.5/60/.115
  • 4: 23/60.5/.110
  • 5: 26/61/.105
  • 6: 30/61.5/.095
  • 7: 34/62/.090
  • 8: 38/62.5/.080
  • 9: 42/63/.070
  • PW: 46/63.25/.065
  • W: 50/63.5/.055

Stock steel shaft: Project X IO

  • R (105G) S (110G) X (115G)

Stock graphite shaft: Mitsubishi MMT 

  • R (85G) S (95G) X (105G, Custom Only)

Grips: Golf Pride Z

Pricing/Availability

  • $185/steel, $200/graphite
  • Pre-sale: 10/22
  • Retail 10/29

More photos and discussion in the forums.

2021 Callaway X Forged Forged UT

The Goal: To pack all of Callaway’s key technology into one “players” utility iron.

The Tech Story: The new 2021 Callaway X Forged UT was designed to offer better players all of the game improvement tech Callaway offers and pack it into a utility iron that flows nicely from the top of the bag into the rest of the set. The 1025 carbon steel hollow body design has the same external and internal weighting features as the CB as well as incorporating Callaway’s patented Flash Face Technology for high launch and ball speeds across the face.

For tour players, this is the section of the iron set where versatility is very welcome. Whether it’s hitting a low fairway finder or hitting it straight up in the air, the Callaway X Forged UT gives them every option all while not creating any drama and optically working into the rest of the set. It’s not uncommon for Callaway staffers to put the UT in play in the 2, 3, and 4-iron, so having the ability to tune them to fit each player’s goal is a huge part of this. Some players use a UT as a bridge from irons to woods, and some use them as legitimate replacements for longer irons to add forgiveness and provide some launch and steeper landing angles.

With the 2021 Callaway X Forged UT, Callaway techs can dial in the UT without altering the CG at all, which is the benchmark of launch, tunability, and consistency.

Optics: The 2018 X Forged UT had a shape that the Tour staff adored, so no major changes—the goal here was to keep the look familiar and add the new Callaway tech to dial players in.

Specs: Length/Lie/Offset

External weighting options for fitters and builders only (Light 12G, STD 17G, Heavy 22G)

  • 18: 39.5/60/.090
  • 21: 39/60.5/.085
  • 24: 38.5/61/.080

Stock steel shaft: Project X U

  • R (105G) S (110G) X (110G, Custom Only)

Stock graphite shaft: Project X Hzurdus Smoke HY

  • R (80G) S (81G) X (81G, Custom Only)

Grips: Golf Pride Z

Pricing/Availability

  • $250/club
  • Retail: 10/29

Overall remarks

I think what Callaway is doing here is very wise more than anything. Being able to nail a very specific spec for better players is important. The company has always made a sharp-looking players iron and they didn’t try something starkly different here, beyond the added tech.

This is an emotional category based on trust. Callaway knows this and responded with a way for the custom team to ensure even more trust for the player regardless of any alterations one would make (shafts, grips etc). How many times have you had a set of awesome irons that you needed to reshaft and the new combo loses that bit of magic? With the new Callaway X Forged CB and Apex MB you can have your cake and eat it too. I like it.

More photos and discussion in the forums.

Your Reaction?
  • 111
  • LEGIT14
  • WOW9
  • LOL8
  • IDHT4
  • FLOP15
  • OB7
  • SHANK48

12 Comments

12 Comments

  1. Pingback: Best irons in golf of 2023: Best blades - Fly Pin High

  2. Pingback: Best irons in golf of 2022: Best blades – GolfWRX

  3. Sanjay Goopta

    Oct 14, 2020 at 4:17 pm

    I liked Gemco?Target’s Northwestern brand better!

  4. Eldrick

    Oct 14, 2020 at 3:24 am

    Roger Cleveland and Phil must have helped on these. A full set of high toes. Keeping spin off the singers and stunners will be awesome. I give it two thumbs up, and two visor tips, then two more thumbs up.

  5. TonyK

    Oct 13, 2020 at 9:28 pm

    MB looks like a one-eyed monster.
    CB looks like an uglier version of MP59.

  6. Stanley

    Oct 13, 2020 at 6:40 pm

    They look awesome. Clever design

  7. dat

    Oct 13, 2020 at 5:10 pm

    Gross design, PXG-esque and not in a good way.

  8. gwelfgulfer

    Oct 13, 2020 at 4:25 pm

    I know it’s more about performance and look at address, but I don’t like the looks.

  9. Jason

    Oct 13, 2020 at 12:28 pm

    I hit the CB and the MB this morning and they feel as good as anything I have ever hit before.

    Both are very playable, but have a divinely shaped “topline.”

    Well done Callaway

  10. Michael Constantine

    Oct 13, 2020 at 11:38 am

    Epic fail.

  11. Milo

    Oct 13, 2020 at 10:53 am

    Those muscle backs are devine!

  12. Mick

    Oct 13, 2020 at 10:35 am

    YUK !

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 64
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending