Equipment

Why you should always use the same ball

Published

4 years ago

Sep 4, 2020

When it comes to testing equipment and playing golf, there is one piece of absolutely essential gear—the golf ball.

You use it on every shot, and it has the ability to change how the rest of your equipment performs and feels. As far as testing is concerned, the ball is one of the easiest things to experiment with, but it also leaves many golfers often switching back and forth between brands and models, which is never a good thing for consistency. This is why regardless of the brand or the style of ball you choose to play, you should use the same one every time for the best opportunity to shoot your lowest scores.

Eliminating variables

Even though most manufacturers have lines of golf balls that closely mirror performance characteristics, there are going to be one or two options within the spectrum that will perform their best for you. Kind of in the way shoe manufacturers all reference the same sizes but how they fit depending you your feet can be vary greatly.

Beyond just the performance, because of the nature of golf ball design and materials used, there will also be a substantial acoustic difference, which depending on the golfer, will have a big impact especially in the short game, which is where more than 75 percent or your shots are taken.

The factors a ball will affect the most

Short game feel
Spin in all facets of your game
Carry distance
The amount of check and releasing on chips and pitches
Directional misses right and left caused by increasing or reducing spin on full swing shots

How to decide

There are a lot of factors when it comes to choosing the right ball for you, and most golfers would see the biggest improvement in their game if they started by comparing short game performance and then slowly evaluating shots further away from the green.

Most golf balls are going to show similar numbers with the driver unless you are looking to optimize a particular ball flight. For example, in the Titleist line, there is a noticeable difference between the apexes of the Pro V1x, Pro V1, and the newest AVX ball, which launches and spins the lowest of the three.

A premium urethane cover ball is always going to offer the greatest amount of control, but depending on the factors most important to you as an individual golfer, you might find the greatest success in a different category. If you prefer to see short game shots roll out more to your target instead of stopping quickly, an ionomer or surlyn cover ball could be the best choice.

Regardless of the ball you choose to use, sticking with the same one over time is going to help provide greater consistency to your game. I’ve heard too many stories of golfers used to using a two-piece switch to a premium urethane ball for a “big event” or important round and suddenly struggle with distance control on putts and short games shots because of the softer feel and increased spin—resulting in approaches coming up well short of the target.

This is just one example of why, regardless of your preference, you should find one that’s comfortable for you and stick with it.

Your Reaction?

LIKE151
LEGIT23
WOW1
LOL4
IDHT0
FLOP3
OB1
SHANK9

Related Topics:

Up Next

GolfWRX x TRENDYGOLF USA: The hottest trends in golf footwear today – Nostalgia

Don't Miss

On Spec FAQ: A guide to basic club fitting and building questions

Ryan Barath

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

4 Comments

Alfredo

Sep 6, 2020 at 7:36 pm

Great article and I could not agree more. I have been playing Bridgestone/Precept for over 25 years and just can not find a better ball. I have tried numerous ‘other balls’ but they just don’t cut the mustard. Recently it has been revealed that the Nike ball Tiger was playing was a Precept/Bridgestone ball, oh my!

Reply Report comment
Rich

Sep 6, 2020 at 12:45 am

Don’t scrimp on the ball. Even if you lose a sleeve per round, you only save a few bucks by purchasing bargain golf balls, and you sacrifice a tremendous amount of performance.

These days, the top quality balls travel just as far as “distance” balls. The only differences are the cost (minor) and their performance around the greens (major).

But if you must save money, buy a tour ball from a company like Snell, who can give you tour performance at a much lower price–about the same as you’d pay for other companies’ 2nd-tier balls.

I play the Snell. If I thought for a moment that the full-priced ProV1 provided even a slim advantage over the Snell, I’d gladly pay the premium. Again, if you lose a sleeve per round, it only comes to about 7 bucks difference. Given all the other costs of playing golf, it is a small difference. (And no, I don’t lose 3 balls per round!)

Reply Report comment
Speedy

Sep 4, 2020 at 3:17 pm

Ball sense and otherwise.

Unless you’re a pro, world-class amateur, or other choosing to partake of official butt-tightening competition.

1. Play good condition balls you find, not caring about their normal price categories.

2. When buying new, low-price or mid-price on sale. Never premium, unless they’re 2fers.

3. Switch whenever you want.

4. Have fun in all climates.

Reply Report comment
- Fredo
  
  Sep 4, 2020 at 7:58 pm
  
  Get your scratched up Nxt tour, velocity ole hex diablo found in the rough. Cheap self.
  “This volik sure is pretty bright doesn’t stick on chip shots but it sure is pretty bright”
  Ole this top flight gamer v2 is pretty solid ole pinnacle goes a mile cause it’s hard as rocks miejer clearance section opinion outta here
  
  Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

17 hours ago

Apr 17, 2024

Andrew Tursky

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?

LIKE19
LEGIT1
WOW0
LOL1
IDHT0
FLOP0
OB1
SHANK3

Equipment

Spotted: TaylorMade P-UDI driving iron

Published

18 hours ago

Apr 17, 2024

Brian Knudson

It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.

We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.

From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.

“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.

TaylorMade P-UDI 3-iron – 20°

TaylorMade P-UDI 4-iron – 22°

Check out the rest of our photos from the 2024 RBC Heritage

Your Reaction?

LIKE12
LEGIT1
WOW3
LOL0
IDHT0
FLOP1
OB0
SHANK1

Whats in the Bag

Collin Morikawa WITB 2024 (April)

Published

19 hours ago

Apr 17, 2024

GolfWRX Staff

Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.

Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)

3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Check out more in-hand photos Collin Morikawa’s clubs here.

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)