Connect with us

Equipment

Callaway Big Bertha B-21 driver, fairway wood, and hybrids: All about forgiveness

Published

on

Callaway’s Big Bertha brand is synonymous with forgiving golf clubs. The Carlsbad-based company is bringing the name back once again to introduce their new line of ultra-forgiving, slice-reducing clubs, including the 2020 Callaway Big Bertha B-21 driver, fairway woods, and hybrids.

“You can’t argue with physics.” That was the tagline used the last time Callaway reintroduced the Big Bertha name to golfers, and the company remains absolutely right—it’s hard to argue against physics.

What’s also hard to argue is that, for the vast majority of recreational golfers, the most common miss is a high spinning shot to the right (for right-handed golfers) AKA  “a slice.” The ball flight is created by a glancing blow to the ball, which increases spin and spin axis, causing shots to veer offline.

If you fall into this category of frustrated golfer tired of yelling at your driver and fairway woods to “get down!” and “land soft!” then the new B-21 line from Callaway could be your ticket to reducing spin, reducing your slice miss, and shooting lower scores—or at least finding the fairway more often.

What is also very interesting with this release is the timing, because right now in recreational golf history, we are seeing an influx of new golfers not seen since the late ’90s. New golfers generally struggle with a slice miss, and as mentioned off the top, the name “Big Bertha” is well known to even casual golfers as forgiving. Regardless of whether you are just getting into golf or have been struggling with that banana ball for a while, the Big Bertha is here to help.

2020 Callaway Big Bertha B-21 Driver

Callaway is throwing everything its engineers know about drivers into making the Big Bertha B-21 a spin-killing, slice-reducing machine by pairing a more low and forward center of gravity (CG) with draw-biased internal weighting—along with many more of its proprietary technologies.

The other part of the B-21’s story is its MOI and ability to match a high-MOI forgiving design with a lower forward CG. When combined, it helps engineers generate spin robustness (a term we will continue to hear more about), which is a golf club’s ability to create more consistent numbers and smaller standard deviation from optimal conditions. It’s a much more specific way to say “we are building a big sweet spot”—and bigger it is.

One of the biggest keys to the B-21’s design is the face—it’s HUGE! It puts more surface area higher in the toe and lower in the heel, which is exactly where golfers who come over the top and create slice conditions mishit shots. Callaway conducted a test with golfers that had an average handicap over 17. In fact, 17 was the minimum handicap to be involved in the testing process and the B-21 dropped the average participant’s spin by close to 600 RPMs from their standard drivers.

This kind of spin reduction helps in aiding straighter shots, because as spin drops, so does the effect of a tilted spin axis. An easy way to understand the concept is that as an airplane turns it “banks” into the turn; you see it lean towards the direction it wants to move. A golf ball does the exact same thing when traveling through the air, and when you pair more axis tilt with more spin, you have shots that curve further offline—that is what the B-21 driver is designed to reduce.

Other key technologies included

  • Callaway’s Patented “Jail Break” technology to stiffen the frame of the driver and help boost ball speeds.
  • All-new, artificial intelligence-created Flash Face SS21 to better optimize the new larger face shape for the intended golfer.
  • T2C Triaxial Carbon Crown to save weight from the crown of the driver’s head and help in lowering the CG.

We’ve done a lot of talking about the head, but there is one last part to building a club that helps reduce spin and hit straighter shots: the shaft! For the Big Bertha B-21 Callaway is bringing back another component of the historic brand—the RCH shaft. This is an in-house designed profile with a higher balance point to help make it easier for golfers to square the clubhead.

We have seen this with a number of OEMs when it comes to building clubs as “total systems” designed to work in conjunction from grip to head. Yes, fitting is still important, and there could be potential gains from various shaft profiles, but the BB-21 is targeted towards the biggest part of the golfing bell curve with the stock RCH shaft (available in 45, 55, and 65-gram offerings).

Specs pricing, and availability

The Callaway Big Bertha B-21 Driver will be available in lofts of 9, 10.5, and 12.5 degrees in both right and left-handed and will be in stores starting September 10th. It will be priced at $499.99

Callaway B-21 Fairway Woods

“Drum roll, please! Now, introducing…for the very first time…Callaway fairway woods…with offset!”

This is truly a big deal, because beyond the center of gravity shifting and lie angle adjusting, adding offset to woods is one of the easiest ways to help golfers reduce a slice, and until now the biggest players in the fairway wood market has completely stayed away from adding it as an option in its lineups. Of all the OEMs, the only one to consistently offer an offset option is Cobra (I know this segment well as my dad has been playing offset woods for more than a decade, and any time a new line comes out the first question I get is “anything with offset?”)

When looking at the intended target golfers for Big Bertha B-21, fairway woods becomes a very important part of the set because they are used often and mostly from the fairway to approach greens. Since hitting fairway woods from the fairway is also one of the most challenging things for a lot of golfers, the designers at Callaway have put every tool they can into these clubs to make them as easy to elevate and confidence-inspiring as they possibly could.

The key design feature to make the B-21 fairway woods easy to hit from tighter lies is how designers have lowered the leading edge to get more face closer to the ground and below the ball. Now, speaking of the face, each head has been optimized with Flash Face SS21 and individually designed for the loft to create maximum ball speeds based on algorithms given to the AI from impact testing of golfers. I know that seems like a lot to take in, but what it really means is Callway knows where you are most likely to mis-hit shots and taken that into account when designing these clubs.

Other technology features include

  • Callaway’s Patented “Jail Break” technology to stiffen the frame of the fairway wood and help boost ball speeds at the center and around the face.
  • T2C Triaxial Carbon Crown to save weight from the crown of each fairway head and help in lowering the CG.

Just like with the B-21 driver, the stock Callaway RCH shaft has been specifically designed to work for the fairway woods and will be available in 45, 55, 65, and 75-gram offerings to allow golfers to progressively matching their shafts through their set.

This makes the Callaway Big Bertha B-21 fairway woods the most forgiving, slice-reducing fairway woods Callaway has ever made.

Specs pricing, and availability

The Callaway Big Bertha B-21 fairway woods will be available in a 3-wood (15 degrees), 5-wood (18-degrees), 7-wood (21-degrees), both right- and left-handed with a 9-wood (24 degrees) available in right-hand only, on starting September 10th.  They will be priced at $299.99 each.

Callaway B-21 Hybrids

This brings us to what could be the most valuable part of the line for regular golfers who struggle with long to mid-iron approach shots—Big Bertha B-21 Hybrids. These are a combination of everything Callaway has learned from previous game-improvement hybrid designs mixed with their most recent Super Hybrid. The B-21’s pack a major punch, all the way down to an available 8-iron hybrid.

They have more offset to fall in line with the new B-21 irons to help build combo sets and maintain a look as the set transitions from irons, and that’s just what you can see. Inside is a combination of technology and materials built to offer the maximum amount of forgiveness available.

The most important technology brought over from the Super Hybrid is the MIM (metal injection molded) tungsten weights strategically placed at the heel and toe of each club and optimized for loft and head weight. This puts upwards of 70 grams or more than 30 percent of the club heads total mass (depending on the loft) around the perimeter to boost MOI and raise launch. Raising launch also means shots that land with a steeper angle of descent, equalling greater stopping power.

Similar to other clubs in the new Big Bertha B-21 line, the hybrids and have:

  • Callaway’s Patented “Jail Break” technology to stiffen the frame of the hybrids sole to crown and help boost ball speeds around the entire face.
  • All-new, Flash Face SS21 created with the help of artificial intelligence to optimize each loft in the hybrid series for ball speed and launch.
  • T2C Triaxial Carbon Crown to save weight from the top of each hybrid to lower the CG and help golfers hit higher-launching, easier-to-stop shots.

The end result is a set of hybrids that can help any golfer in need of more launch and more distance, and the ability to properly gap from their longest iron to their highest-lofted fairway wood without having to sacrifice any forgiveness or ball speed along the way.

Specs, pricing, and availability

The Callaway Big Bertha B-21 hybrids will be available from 3-hybrid all the way to 8-hybrid, in both right and left-handed starting September 10th. The stock shaft with be the Callaway RCH 65-gram hybrid.

They will be priced at $249.99 each.

Your Reaction?
  • 119
  • LEGIT11
  • WOW6
  • LOL8
  • IDHT1
  • FLOP9
  • OB4
  • SHANK34

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

7 Comments

7 Comments

  1. Pingback: Best hybrids of 2021: By club fitters for you! – GolfWRX

  2. VooDoo

    Aug 19, 2020 at 2:17 am

    Time to take a trip to the PGA superstore and listen to the sales pitch.

    I bought a XR16 when it was released and has been working great, so good I have tried every Callaway release since and have yet to see more than 3 yards gain,,,,

    • Doug Star

      Aug 21, 2020 at 9:40 am

      Same, I use the 6 year old BB V-Series with an updated Evenflow stiff 65g shaft that I took off my updated Rogue driver. It work better for me, so no further need for the Rogue head and my drives easily match or better all the new drivers being played by my colleagues. Although, I do like the look of the BB B21.

  3. Paul

    Aug 18, 2020 at 2:03 pm

    So it’s the 2017 Big Bertha with jailbreak? That driver didn’t get nearly the attention it should have. I have that head in a 70 gram aldila green shaft, and it matches or beats everything I try against it.

    • Gunny

      Aug 18, 2020 at 2:54 pm

      $499 to get people into the game is s tough sell. This could’ve been a changer for Callaway at $349.

      • Je

        Aug 18, 2020 at 8:46 pm

        We can wait one more year and get it from callaway preowned. Will be cheaper than 350 for sure.Some of my friends who don’t want to practice but still want to enjoy golf are highly interested.

      • Pushslice

        Aug 19, 2020 at 2:38 am

        Cobra F-Max anyone?

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

on

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

on

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Project X Denali hybrid shaft

Published

on

Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.

Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.

The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.

Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.

Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!

 

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending