Connect with us

Published

on

Learn what the right amount of “shoulder turn” is for you so you can maximize your efficiency factor in your swing. Not enough shoulder turn will prevent a proper weight shift and loading of momentum for the downswing and too much will throw the whole swing off of center and cause unnecessary strain in the transition! What could you focus on so you can consistently get the right proportion of turn for yourself?

Your Reaction?
  • 12
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT1
  • FLOP8
  • OB8
  • SHANK20

Shawn Clement is the new Director of Development at the Royal Quebec Golf Academy in Quebec City, Canada and a class A PGA teaching professional. Shawn was a 2011 and 2015 Ontario PGA Teacher of the Year nominee while Directing at the Richmond Hill Golf Learning Centre. He was also voted in the top 10 (tied with Martin Hall at No. 9) as most sought after teacher on the internet in 2016 with 83 000 subscribers on YouTube and 36 millions natural views. Shawn has been writing for numerous publications since 2001 including Golf Tips Magazine and Score Golf Magazine. He also appeared of the Golf Channel’s Academy Live in July 2001 with Jerry Foltz and Mike Ritz. Shawn Clement has the distinction of being one of the only professionals fit by Ping’s Tour fitting centre where he was fitted with left and right handed clubs including 2 drivers with 115 plus miles per hour and 300 plus yard drives from both sides.

5 Comments

5 Comments

  1. Tom

    Apr 23, 2020 at 10:41 am

    This is cool and i found this video is help too I think
    https://www.youtube.com/watch?v=qEnTZbMkNc4

  2. PaulM26

    Apr 5, 2020 at 11:32 am

    Shawn is conflating two things: the height and width of the arms — which is his real focus — and the actual turning of the shoulders, which he really doesn’t pay attention to. Every swing shown has each player’s shoulders turning at least 90 degrees, even if the club isn’t getting to parallel at the top of the swing.

    The overall advice seems sound. However, it would be a lot clearer if he wasn’t calling swing width the “shoulder turn.”

    • geohogan

      Apr 6, 2020 at 9:04 am

      I would say he is conflating shoulder turn and the turning of the torso.

      This video explains the look of 90 degree shoulder turn is related to the lower body:

      https://www.youtube.com/watch?v=IhnSInYR1lc

    • Jack

      Apr 23, 2020 at 12:57 am

      Is he really turning the shoulders all that much? In relation to the hips, he’s turning much less than others. Look at the hips. The butt cheeks are basically facing the target, which I have not seen to that extent in other swings. Also his left shoulder is very high at the top of the back swing. I think his swing may be easier on the body though.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Instruction

What you can learn from the rearview camera angle

Published

on

We often analyze the golf swing from the face-on view or down-the-line camera angle. However, we can also learn how the body moves in the swing from the rearview or backside view.

When seeing the swing from the rearview, we can easily see how the glutes work. The trail glute actually moves back and around in the backswing. This means the glute moves towards the target or towards the lead heel. Note the trail glute start point and endpoint at the top of the backswing.

To some, this may seem like it would cause a reverse weight shift. However, this glute movement can enable the upper body to get loaded behind the ball. This is where understanding the difference between pressure, and weight is critical (see: “Pressure and Weight”).

This also enhances the shape of the body in the backswing. From the rear angle, I prefer to have players with a tuck to their body in their trail side, a sign of no left-side bend.

This puts the body and trail arm into a “throwing position”, a dynamic backswing position. Note how the trailing arm has folded with the elbow pointing down. This is a sign the trailing arm moved in an efficient sequence to the top of the backswing.

Next time you throw your swing on video, take a look at the rearview camera angle. From this new angle, you may find a swing fault or matchup needed in your golf swing to produce your desired ball flight.

Your Reaction?
  • 29
  • LEGIT7
  • WOW2
  • LOL1
  • IDHT0
  • FLOP1
  • OB1
  • SHANK2

Continue Reading

Instruction

How to stop 3-putting and start making putts

Published

on

When we are 3-putting we are ‘stuck in the box’. This means that when we are standing over the putt the second before we make our stroke everything happens to ‘go downhill.’ When this happens, depending on your playing level, things can become a bit erratic on the putting surface.

When a 3 putt happens, it is typically because you failed to do something before you made your stroke. The large majority of my 3 putts happen when I am not completely SOLD on the line of my putt, aka not committed. Questioning anything over the ball will lead to 3 putts.

Here is a breakdown/checklist on how to approach the green and get your ball in the cup without hesitation.

1. It starts with the approach shot into the green and the decision of direction you make to enter the hole. Scan the entire green with your eyes on the walk-up. Left to right and right to left. Look for a few seconds before you step onto the putting surface. This helps determine the high side and the low side, or if the green is relatively flat. Don’t be picky, just look and make a decision.

2. Once you get to the ball, mark it. Take 3 steps behind your ball mark. Now you must pick a line… Left, Center, or Right of the cup. (Skip step 3 if you know the line) It should take seconds but for those that are not sure it will take longer. Understand that every putt has a statistical level of difficulty. So to increase the odds, players must avoid putting in the unsure mind, and take the time to figure out a line. I also find that people who are 3 putting are overly confident and just not committed aka too quick to putt.

3. To commit, you must find the angle of entry into the cup. Walk up to the hole and look at the cup. How is it cut? Determine if it is cut flat or on a slope angle. This will help you see the break if you are having a hard time. Then determine how much break to play. Cut the hole into 4 quarters with your eyes standing right next to it. Ask yourself, which quarter of the cup does the ball need to enter to make the putt go in the hole?

I encourage using the phrases ‘in the hole’ or ‘to the hole’ as great reinforcement and end thoughts before stroking the ball. I personally visualize a dial on the cup. When my eyes scan the edges, I see tick marks of a clock or a masterlock – I see the dial pop open right when I pick the entry quadrant/tick mark because I cracked the code.

Remember, the most important parts of the putt are: 1.) Where it starts and 2. ) Where it ends.

4. To secure the line, pick something out as the apex of the putt on the walk back to the mark. Stand square behind the ball mark and the line you have chosen.

5. To further secure the line, place your ball down and step behind it to view the line from behind the ball. Don’t pick up the ball mark until you have looked from behind. When you look, you need to scan the line from the ball to the cup with your eyes. While you are scanning, you can make adjustments to the line – left, right or center. Now, on the walk into the box, pickup the mark. This seals the deal on the line. Square your putter head to the ball, with feet together, on the intended line.

6. To make the putt, look at the apex and then the cup while taking your stance and making practice strokes to calibrate and gauge how far back and through the stroke needs to be.

7. To prove the level of commitment, step up to the ball and look down the intended line to the apex back to the cup and then back to the apex down to your ball. As soon as you look down at the ball, never look up again. Complete one entire stroke. A good visual for a putting stroke is a battery percentage and comparing your ‘complete stroke’ to the percentage of battery in the bar.

8. Look over your shoulder once your putter has completed the stroke, i.e. listen for the ball to go in and then look up!

If you find a way that works, remember it, and use it!

Your Reaction?
  • 89
  • LEGIT12
  • WOW1
  • LOL2
  • IDHT3
  • FLOP2
  • OB1
  • SHANK26

Continue Reading

Instruction

Golf 101: Why do I chunk it?

Published

on

Whether you are a beginner, 10 handicaps, or Rory McIlroy, no one player is immune to the dreaded chunk. How many times have you hit a great drive, breathing down the flag from your favorite yardage and laid the holy sod over one? It’s awful and can be a total rally killer.

So what causes it? It could be several things, for some players, it could be a steep angle of attack, others, early extension and an early bottoming out and sometimes you’ve just had too many Coors Lights and the ground was closer than your eyes told you…been there.

This is Golf 101—let’s make it real simple and find one or two ways that a new golfer can self diagnose and treat themselves on the fly.

THE MAIN CAUSE

With beginners I have noticed there are two main things that cause the dreaded chunk:

  1. Players stand too close to the ball and have no way to get outta the way on the way down. This also really helps to hit Chunk’s skinny cousin: Skull.
  2. No rotation in any form causing a steep angle of attack. You’ve seen this, arms go back, the body stays static, the club comes back down and sticks a foot in the ground.

SO HOW DO I FIX MYSELF?

Without doing all-out brain surgery, here are two simple things you can do on the course (or the range) to get that strike behind the ball and not behind your trail foot.

This is what I was taught when I was a kid and it worked for years.

  1. Make baseball swings: Put the club up and in front of your body and make horizontal swings paying close attention to accelerating on the way through. After a few start to bend at the hips down and down until you are in the address position. This not only gives your body the sensation of turning but reorientates you to exactly where the bottom of your arc is.
  2. Drive a nail into the back of the ball: This was a cure-all for me. Whether I had the shanks, chunks, skulls, etc, focusing on putting the clubhead into the back of that nail seemed to give me a mental picture that just worked. When you are hammering a nail into a wall. you focus on the back of that nail and for the most part, hit it flush 9 outta 10 times. Not sure if its a Jedi mind trick or a real thing, but it has gotten me outta more pickles than I care to admit.

As you get better, the reason for the chunk may change, but regardless of my skill level, these two drills got me out of it faster than anything all while helping encourage better fundamentals. Nothing wrong with that.

Your Reaction?
  • 51
  • LEGIT8
  • WOW0
  • LOL0
  • IDHT0
  • FLOP2
  • OB2
  • SHANK7

Continue Reading

Trending