Equipment

New 2020 Wilson Staff D7 Forged irons: Forged for all

Published

4 years ago

Jan 7, 2020

In 2019, Wilson Staff irons were in the bag of a major winner again, thanks to Gary Woodland winning the U.S. Open with the Wilson Staff Model Forged Blades. From a brand perspective, this was a huge win for Wilson, but one quick look into the bag from a consumer relatability side of things would show that few golfers can gain a benefit from hitting a forged blade ala Mr. Woodland. Wilson is proving forged can be for everyone with the introduction of the Wilson D7 Forged Irons for 2020. They’re forged and fast!

Just because an iron is forged doesn’t mean golfers of a particular handicap should shy away from it—forging is merely a process used to create end products, not a measure of a club’s forgiveness or ball speed potential. With the new Wilson D7 Forged irons, every golfer can appreciate the feeling of a well-struck shot with a forged club without the fear of a tiny miss coming up 10 yards short, since they are also packed with key Wilson golf innovations.

Wilson Staff D (for distance) Series is better known for larger cast clubs built for longer, higher-flying shots, but the engineers at Wilson wanted to change that perception by bringing D Series technology into a club that would appeal to more traditional golfers still looking for a ball speed boost. By working with their tour staff from the PGA Tour down to PGA staff professionals, they have created a club with tour-preferred styling; one packed with distance and launch improving technology.

More photos of/discussion about the Wilson Staff D7 Forged irons in the forums.

2020 Wilson Staff D7 Forged irons: The technology

Urethane Power Chamber and Power Holes: Like with the previous (non-forged) D7 irons, the new forged model has a unique set of holes on the sole positioned to allow for greater flexing of the face for more ball speed, especially on shots hit lower on the face, a popular spot for recreational players.

By combining these slots with a urethane-filled cavity behind a soft 8630 forged carbon steel face (the Power Chamber) you get greater rebound potential paired with a very pleasing soft feel. Placing a vibration dampening insert or softer material behind a thin face to tune acoustics is not a new idea, and each OEM has a different take on what the best way to achieve the final result is, but Wilson is the only player using both a filled cavity and sole slots to do it, making the D7 forged a stand out in the crowd.

The looks

The D7 Forged irons are designed to appeal to what Wilson calls the “traditional golfer” with minimal offset similar to the C and Tour series irons and a thinned out topline and thinner sole for improved ground interaction. It’s one thing to have a technology-filled club, but if a golfer doesn’t feel comfortable standing over a shot, it’s never going to end up in the bag.

Wilson designers looked at every detail to bring the D7 Forged iron in line with the wants and needs of aspiring players.

“Combining the distance technologies from the original D7 line with the aesthetics of Wilson Staff’s players irons, the D7 Forged Irons provide an ideal blend of maximum distance and ultimate feel for golfers looking for effortless distance and ultimate control,” said Jon Pergande, Manager of Golf Club Innovation. “

“Through the optimized sole and face thickness, urethane-filled Power Chamber and centered power holes, the new D7 Forged Irons give golfers remarkable ball speeds, shot-making ability, and a soft forged feel across the entire club face.”

When talking further about the new D7 Forged with Jon, one of the reoccurring themes of our conversation was choices. A golfer needs confidence standing over a longer iron, knowing that a miss—over a hazard for example—still has the opportunity to make it, even if contact isn’t perfect. That same golfer also needs to know when hitting a short iron, precision will be rewarded with consistent downrange dispersion—something that more traditional game improvement clubs can struggle with based on spin rates.

The D7 Forged balances the best of both worlds very well!

Shafts, pricing, and availability

The D7 Forged irons stock shafts are

Steel: KBS $-Taper Lite’s
Graphite: Project X Catalyst Black 80g

The D7 Forged irons start at $899.99 in steel and are $999.99 with graphite, in a seven-piece configuration.

The D7 Forged will be available for pre-order at retail and on Wilson.com, starting January 14, 2020. You will see them arrive on golf retailers shelves January 21, 2020.

More photos of/discussion about the Wilson Staff D7 Forged irons in the forums.

Your Reaction?

LIKE237
LEGIT26
WOW17
LOL4
IDHT6
FLOP1
OB1
SHANK12

Related Topics:

Up Next

Morning 9: Do tour pros cheat? A caddie’s take | Monahan: I believe Patrick Reed | Brooks is back

Don't Miss

New for 2020: Tour Edge Exotics EXS 220 driver

Ryan Barath

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

12 Comments

Pelling

Jan 8, 2020 at 2:38 pm

Junk, for hackers.

Reply Report comment
Kurt

Jan 7, 2020 at 11:52 pm

Got fitted for 5-PW yesterday. Great distance and feel. Ultimately preferred them over the T200, particularly for the prices here locally (NZ). Should be here early next week.

Reply Report comment
James

Jan 7, 2020 at 3:15 pm

Priced $1000 for 7 irons. BAD MOVE! The Wilson brand is not THAT good. Yet. Hit 2 home runs first.

Reply Report comment
- Greg
  
  Jan 9, 2020 at 12:55 am
  
  I see your point, but just wondering–would the V6’s and the Staff Model Blades be considered home runs?
  
  Reply Report comment
- Patrick J McLeod
  
  Jan 10, 2020 at 10:45 am
  
  $1000 for a 7 piece forged set with graphite is priced below just about every other club in the category.
  
  Reply Report comment
Jim

Jan 7, 2020 at 12:25 pm

The iron could potentially be a big step for Wilson as it’s a pretty good looking iron that allows for most players to play forged irons. It’s a little big/ thick for my taste for a nice overall appearance. But the multiple sole slots is where they lose me. I couldn’t look at these in my bag every round, it’s just goofy looking and not in keeping with what you would expect from a better iron. Wilson needs to lose the slots and then they would have a solid iron in my opinion.

Reply Report comment
Martin Brown

Jan 7, 2020 at 11:14 am

The article says this is the only iron to have sole slots and urethane filling. However the TaylorMade P790 has had exactly that since its introduction in 2017.

Reply Report comment
- Thomas A
  
  Jan 7, 2020 at 12:08 pm
  
  I think they meant that they are one piece. In the P790’s the urethane insert is not connected to the urethane slot filling.
  
  Reply Report comment
Milo

Jan 7, 2020 at 11:11 am

So thick and shiny

Reply Report comment
Peter

Jan 7, 2020 at 9:39 am

Is just the face insert forged? If so, the term forged iron is very misleading compared to a true forged head from a single billet.

Reply Report comment
- Thomas A
  
  Jan 7, 2020 at 12:09 pm
  
  Yes, only the face is forged. Which is fine with me because I only hit the ball with the face of the iron. 😉
  
  Reply Report comment
  - Charlie Waffles
    
    Jan 7, 2020 at 12:54 pm
    
    I’m getting a different take on these, thinking that they are forged and not just the face. I could be wrong tough.
    
    Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

5 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?