Connect with us


New 2020 Wilson Staff D7 Forged irons: Forged for all



In 2019, Wilson Staff irons were in the bag of a major winner again, thanks to Gary Woodland winning the U.S. Open with the Wilson Staff Model Forged Blades. From a brand perspective, this was a huge win for Wilson, but one quick look into the bag from a consumer relatability side of things would show that few golfers can gain a benefit from hitting a forged blade ala Mr. Woodland. Wilson is proving forged can be for everyone with the introduction of the Wilson D7 Forged Irons for 2020. They’re forged and fast!

Just because an iron is forged doesn’t mean golfers of a particular handicap should shy away from it—forging is merely a process used to create end products, not a measure of a club’s forgiveness or ball speed potential. With the new Wilson D7 Forged irons, every golfer can appreciate the feeling of a well-struck shot with a forged club without the fear of a tiny miss coming up 10 yards short, since they are also packed with key Wilson golf innovations.

Wilson Staff D (for distance) Series is better known for larger cast clubs built for longer, higher-flying shots, but the engineers at Wilson wanted to change that perception by bringing D Series technology into a club that would appeal to more traditional golfers still looking for a ball speed boost. By working with their tour staff from the PGA Tour down to PGA staff professionals, they have created a club with tour-preferred styling; one packed with distance and launch improving technology.

2020 Wilson Staff D7 Forged irons: The technology

Urethane Power Chamber and Power Holes: Like with the previous (non-forged) D7 irons, the new forged model has a unique set of holes on the sole positioned to allow for greater flexing of the face for more ball speed, especially on shots hit lower on the face, a popular spot for recreational players.

By combining these slots with a urethane-filled cavity behind a soft 8630 forged carbon steel face (the Power Chamber) you get greater rebound potential paired with a very pleasing soft feel. Placing a vibration dampening insert or softer material behind a thin face to tune acoustics is not a new idea, and each OEM has a different take on what the best way to achieve the final result is, but Wilson is the only player using both a filled cavity and sole slots to do it, making the D7 forged a stand out in the crowd.

The looks

The D7 Forged irons are designed to appeal to what Wilson calls the “traditional golfer” with minimal offset similar to the C and Tour series irons and a thinned out topline and thinner sole for improved ground interaction. It’s one thing to have a technology-filled club, but if a golfer doesn’t feel comfortable standing over a shot, it’s never going to end up in the bag.

Wilson designers looked at every detail to bring the D7 Forged iron in line with the wants and needs of aspiring players.

“Combining the distance technologies from the original D7 line with the aesthetics of Wilson Staff’s players irons, the D7 Forged Irons provide an ideal blend of maximum distance and ultimate feel for golfers looking for effortless distance and ultimate control,” said Jon Pergande, Manager of Golf Club Innovation. “

“Through the optimized sole and face thickness, urethane-filled Power Chamber and centered power holes, the new D7 Forged Irons give golfers remarkable ball speeds, shot-making ability, and a soft forged feel across the entire club face.”

When talking further about the new D7 Forged with Jon, one of the reoccurring themes of our conversation was choices. A golfer needs confidence standing over a longer iron, knowing that a miss—over a hazard for example—still has the opportunity to make it, even if contact isn’t perfect. That same golfer also needs to know when hitting a short iron, precision will be rewarded with consistent downrange dispersion—something that more traditional game improvement clubs can struggle with based on spin rates.

The D7 Forged balances the best of both worlds very well!

Shafts, pricing, and availability

The D7 Forged irons stock shafts are

  • Steel: KBS $-Taper Lite’s
  • Graphite: Project X Catalyst Black 80g

The D7 Forged irons start at $899.99 in steel and are $999.99 with graphite, in a seven-piece configuration.

The D7 Forged will be available for pre-order at retail and on, starting January 14, 2020. You will see them arrive on golf retailers shelves January 21, 2020.

Your Reaction?
  • 237
  • LEGIT26
  • WOW17
  • LOL4
  • IDHT6
  • FLOP1
  • OB1
  • SHANK12

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.



  1. Pelling

    Jan 8, 2020 at 2:38 pm

    Junk, for hackers.

  2. Kurt

    Jan 7, 2020 at 11:52 pm

    Got fitted for 5-PW yesterday. Great distance and feel. Ultimately preferred them over the T200, particularly for the prices here locally (NZ). Should be here early next week.

  3. James

    Jan 7, 2020 at 3:15 pm

    Priced $1000 for 7 irons. BAD MOVE! The Wilson brand is not THAT good. Yet. Hit 2 home runs first.

    • Greg

      Jan 9, 2020 at 12:55 am

      I see your point, but just wondering–would the V6’s and the Staff Model Blades be considered home runs?

    • Patrick J McLeod

      Jan 10, 2020 at 10:45 am

      $1000 for a 7 piece forged set with graphite is priced below just about every other club in the category.

  4. Jim

    Jan 7, 2020 at 12:25 pm

    The iron could potentially be a big step for Wilson as it’s a pretty good looking iron that allows for most players to play forged irons. It’s a little big/ thick for my taste for a nice overall appearance. But the multiple sole slots is where they lose me. I couldn’t look at these in my bag every round, it’s just goofy looking and not in keeping with what you would expect from a better iron. Wilson needs to lose the slots and then they would have a solid iron in my opinion.

  5. Martin Brown

    Jan 7, 2020 at 11:14 am

    The article says this is the only iron to have sole slots and urethane filling. However the TaylorMade P790 has had exactly that since its introduction in 2017.

    • Thomas A

      Jan 7, 2020 at 12:08 pm

      I think they meant that they are one piece. In the P790’s the urethane insert is not connected to the urethane slot filling.

  6. Milo

    Jan 7, 2020 at 11:11 am

    So thick and shiny

  7. Peter

    Jan 7, 2020 at 9:39 am

    Is just the face insert forged? If so, the term forged iron is very misleading compared to a true forged head from a single billet.

    • Thomas A

      Jan 7, 2020 at 12:09 pm

      Yes, only the face is forged. Which is fine with me because I only hit the ball with the face of the iron. 😉

      • Charlie Waffles

        Jan 7, 2020 at 12:54 pm

        I’m getting a different take on these, thinking that they are forged and not just the face. I could be wrong tough.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.


What are the best Srixon irons? – GolfWRXers discuss



In our forums, our members have been discussing Srixon irons. WRXer ‘dgarland’ wants to know what our members feel are the best recent Srixon irons but doesn’t want blades included in the conversation. Our members have been sharing their picks in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • MMB1500: “745s all day. I still play my set frequently, despite also having the ZX-5s.”
  • dmeeksDC: “I like the clean look of the 745 the most, and the performance can’t be beaten.”
  • BCULaw: “Z785 for me. It was just a perfect blend of forged feel with unexpected distance and forgiveness. I had a set of z745s and two sets of zx7s. Both were really nice sets, but I enjoyed the 785s more and played better golf with them.”
  • T.B.: “The 585 are basically point and shoot for me. Very predictable. I’ve hit lots of irons trying to find something better and just keep going back to these. All that said, lol, I have plans on this winter finding some ZX5 heads and shafting them up.”

Entire Thread: “What are the best Srixon irons? – GolfWRXers discuss”

More from the Forums

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading


Coolest thing for sale in the GolfWRX Classifieds (9/29/22): Mint set of Miura TC-201 irons



At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for mint set of Miura TC-201 irons

From the seller (@zbeard23): “First is a mint set of TC-201 irons. 5-PW. Custom built by Peoples Golf. UNC theme. All std. L/L/L. Used less than 5 rounds. 105 TX MMT shafts. Z cord grips. $1750.”

To check out the full listing in our BST forum, head through the link: Mint set of Miura TC-201 irons

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Beau Hossler WITB 2022 (September)



Driver: Titleist TSR3 (11 degrees)
Shaft: Project X HZRDUS Black Gen4 60 TX

3-wood: Titleist TSR2 (16.5 degrees @ 15.75)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX

Hybrid: Callaway Apex UW (21 degrees)
Shaft: Graphite Design Tour AD DI 9 X

Irons: Srixon ZX5 (4), Titleist 620 CB (5-9)
Shafts: Nippon N.S. Pro Prototype X, Nippon N.S. Pro WV125 Tour Only

Wedges: Titleist Vokey Design WedgeWorks Proto (50-M, 60-K), Titleist Vokey Design SM9 (46-10F)
Shafts: Nippon N.S. Pro WV125 Tour Only

Putter: Odyssey 2-Ball Ten
Grip: WINN

Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Align

More Beau Hossler WITBs

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading