Connect with us

Equipment

WRX Spotlight: EV3D putters

Published

on

We hear the buzz words “3D printed” all the time these days. It’s a newer technology that has shown to have lots of applications in other industries, but golf hasn’t been one of those until now. 3D printing a putter is a pretty new adventure, but EV3D Golf is showing that it is going to be much more common very soon.

EV3D Golf is bringing new putter designs to us golfers that CANNOT be made through traditional casting or milling. 3D printing is the process of creating a putter layer-by-layer, allowing any supported shape you can think of. Even hollow designs like EV3D’s signature lattice features!

This gives EV3D engineers the ability to create putters that push the limits of MOI, feel, and of course look. The intricate lattice design does more than just look really cool, it also helps move weight to the outside and rear of the putter, increasing MOI in all models. All EV3D putters are printed from a combination of 420 stainless steel and bronze. This alloy gives the putter its responsive feel, excellent durability, and the ability to offer 3 finishes. They also offer a ton of different hosel designs to fit your eye and putting stroke, all are 3D printed as well. EV3D even adds custom touches like text in the cavity, different site lines, and paint fill to make it your own. Right now they offer 6 different head shapes, but if none of those are what you are looking for, they will work with you to print your dream putter from scratch!

We got our hands on 2 models, the EV3D Golf Ares X and Hades, to take out to the course and putt with. In hand the first thing that grabs your eye’s attention is the intricate lattice work on the putters.

All you want to do is hold the putter closer to your face and see how the heck they did it. At the right angles you can actually see through that lattice structure, but we were told that debris getting stuck in there isn’t an issue. The next thing you will notice is the rough texture of the head. This is created by the process of 3D printing the head, showing off the layers of material used to build the shape of the head. I don’t know if was intended but that rough texture does help with reducing glare, making the putters easy on the eyes even in the brightest conditions.

I personally really like the Antique Bronze finish, but EV3D does offer a Natural and Slate Black finish to suit your personal taste. Out on the putting green the Ev3D putters performed really well, offering a hefty dose of forgiveness and a crisp feel and sound. Traditionally modes like the Hades don’t offer much in the way of forgiveness compared to mallets, but the Hades shocked me with its off-center putts. Putts hit off the heel or toe stayed on line much better and I even made a couple that had no business even being close to the hole.

Distance loss on those mishits is about what you would expect, coming up a little short, but defiantly not a drastic difference. Since the EV3D line doesn’t have any fancy face milling, I was a little worried about the initial roll and if the ball would hop or skid. Initial contact was great, only met with a tiny bit of skid before rolling out. Nothing that I think effected even my longest putts. The feel off the face is something that reminds you of a quieter classic Ping BeCu putter, crisp with an audible click. If you are looking for a silent impact, like an Odyssey Microhinge, then the EV3D line might not be your cup of tea. If you are on a quest for exceptional responsiveness on well struck and mishit putts then you should be very pleased with any of the EV3D putter models. The feel of impact is a little firmer than I think we are all used to these days with so many inserts and deep milling. The crisp feel and slightly more audible EV3D is somewhat refreshing and mishit putts are extremely easy to recognize.

Overall, the EV3D putters are a solid offering from a new company utilizing a new technology in the golf club space. With all the combinations of putter heads, site lines, and hosels, I can’t see you not being able to find a putter that fits your eye. Looks for any putter are going to be subjective, but there is no denying that EV3D is pushing the limits at a time where we see a lot of similar putter designs from all manufacturers. And if you are the type of person who wants to create an original design of your own that has never been done, EV3D is waiting for that call to help you take your idea from thought to printed putter head! Check the entire EV3D putter line at the company website.

Your Reaction?
  • 109
  • LEGIT23
  • WOW17
  • LOL9
  • IDHT2
  • FLOP11
  • OB4
  • SHANK61

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

22 Comments

22 Comments

  1. Betty Scott

    Oct 20, 2019 at 2:55 pm

    I’m gonna make a new putter, 3 basic styles, gonna have at least a dozen different elements in the putter. Gonna just come up with some BS on how each element will make you make more putts. I’ll offer custom paintfill and stamping for all orders… Then I’m gonna charge 3 thousand dollars. Some idiot will pay it.

  2. Jose Pinatas

    Oct 20, 2019 at 2:50 pm

    Gimmick and ripoff..

  3. Don Denyer

    Oct 20, 2019 at 9:33 am

    I am very impressed with the unique concept and detailed work on these putters.

  4. Calvin Wang

    Oct 19, 2019 at 4:29 pm

    How are these designs “pushing the limits of MOI” when the lattice features are removing weights from the toe & heel sides of the putter?

  5. Ray

    Oct 19, 2019 at 3:45 pm

    Honestly, Hideous..

  6. MT

    Oct 19, 2019 at 11:44 am

    I don’t think it’s a very attractive design. Also a great place for dirt and other debris to collect in those spaces. Sometimes they just don’t use common sense.

    • JT

      Oct 20, 2019 at 8:50 pm

      Hey, it could be a good place to keep your lunch…

  7. GrammarBoyIGuess

    Oct 19, 2019 at 10:51 am

    Sorry to grammar police but seeing ‘definitely’ spelled as ‘defiantly’ makes me think somebody skipped middle school

    • Grammarpolicepolice

      Oct 20, 2019 at 2:38 am

      You forgot to place a full stop at the end of your comment.

      • Grahmaar-Polyce

        Oct 20, 2019 at 7:29 pm

        There should be a comma after the word police as well.

  8. Hunchback of Notre Dame

    Oct 18, 2019 at 8:01 pm

    Looks like somethin’ from the Game Of Thrones.

  9. JP

    Oct 18, 2019 at 7:50 pm

    Those are going to suck when you get dirt, debris, grass, and whatever stuck in the “lattice” design. It’ll take a pressure washer to clean that out.

  10. Brett

    Oct 18, 2019 at 5:46 pm

    How will these putter heads hold up to bending of loft and lie, or heat if/when re-shafting?

    • EV3D Golf

      Oct 23, 2019 at 5:15 pm

      Brett, these putter heads go into a furnace after being 3D printed… so they are a solid block of metal that holds-up to normal stresses of club making process.

  11. Tommy G

    Oct 18, 2019 at 3:07 pm

    Speaking of cheap….Kuchar is a cheap SOB

  12. putterific

    Oct 18, 2019 at 2:55 pm

    3D printing has a long way to go. It’s not yet a precision tool. And with all the top putters being milled these days with extremely tight tolerances, I’d say there’s no way anyone is going to want these putters. Cool idea but not a good use of 3D printing in my opinion.

    • EV3D Golf

      Oct 23, 2019 at 5:12 pm

      Yes, 3D printing is still a new technology. However, some metal 3D printers can print down to 20 microns. Right now there are airplane engine parts and orthopedic implants that use metal 3D technology.

  13. Chris C.

    Oct 18, 2019 at 2:47 pm

    They remind me of cheap lawn furniture. I want to grab some emery paper and finish the putters.

  14. Vince Guest

    Oct 18, 2019 at 12:50 pm

    Tough market to enter into and these initial designs don’t actually look very good.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

on

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alejandro Tosti WITB 2024 (April)

Published

on

  • Alejandro Tosti what’s in the bag accurate as of the Zurich Classic.

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5

3-wood: TaylorMade Qi10 Tour
Shaft: Project X HZRDUS Black 80 TX

Hybrid: TaylorMade Qi10 Tour Rescue (22 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 6.5 100

Irons: Srixon ZX7 Mk II (4-PW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100

Wedges: Cleveland RTX6 ZipCore Tour Rack (50-10 MID, 54-10 MID, 58-10 MID, 60-06 LOW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100, S400

Putter: Scotty Cameron

Grips: Golf Pride MCC Plus4

Check out more in-hand photos of Alejandro Tosti’s WITB in the forums.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

on

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending