Connect with us

Equipment

Top 5 drivers of all time: 400cc and under

Published

on

With modern driver technology, 460cc is the club head volume that reigns supreme. Even modern “tour” drivers being offered by OEMs are over 430cc, and those releases are becoming less popular as modern players are choosing total forgiveness over workability.

But there was a time not too long ago when 350cc was considered “a toaster on a stick.” As technology and manufacturing techniques improved, those 350cc toasters became 400cc “Volkswagen vans.” If you didn’t hear one of these phrases muttered when you pulled out a new driver in the early 2000s, you’re lucky!

The 400cc-and-under drivers of the early and mid-2000s shifted the way golfers now look at technology, and with let’s take a look back at the top five 400cc-and-under drivers of all time.

Taylormade R510 TP

The driver for which an entire half-decade of clubs were compared to. You couldn’t hit a driver or talk about new clubs without someone saying “is it as good as the R510 TP?”

TaylorMade’s dominance in the driver category didn’t start with the R500 series though, it was the previous 300 Series that was revolutionary in changing the way golfers looked at driver models to fit their game by offering three completely different heads (300, 320, and 360) to fit player types and preferences.

The R500 Series took the multi-release concept a step further with the 510, 540, and 580 drivers, but then came the “holy grail” R510 TP (Tour Preferred), and the rest is history; an open look from address, inverted cone clubface, a real-deal Fujikura 757 Speeder shaft (huge deal at the time)—this is a driver people still talk about, and for good reason.

Titleist 905S

With the massive popularity of the Titleist 983K and E drivers, it was going to take a LOT from the Titleist R&D team to convince both tour players and regular golfers to make another switch – but they did it with the 905 Series.

The 905 series, originally launched with the 905T (more pear-shaped ) and the 905S (deeper face) models. These were both eventually followed by Titleist’s first 460cc driver, the 905R.

The 905S was the direct replacement to the player preferred deep faced 983E and to this day is still considered one of the great designs in the 400cc era.

It had a strong titanium face insert to boost ball speed, and aluminum shaft sleeve to help push mass and COG lower into the head because they were still full bore through at the time. The shape of the 905S made it an easy adjustment for players coming from smaller drivers and was just so good looking from address. It came with a nice selection of stock shaft options and a very cool headcover.

Honorable mention to the 905T—a driver used by Steve Stricker for a long time with a ProForce V2 shaft

Cleveland Launcher 400

For Cleveland Golf, the Launcher brand was synonymous with “big” drivers and long drives. Beyond Tiger Woods, there wasn’t a hotter golfer on the planet in the mid-2000s than V.J. Singh, and he was also one of the longest on tour.

The Launcher 400 came after the original 330, and although from the outside it looked simple, from a technology standpoint, it had an extremely light crown that pushed CG as low as possible to offer forgiveness and low spin. At the time, Cleveland Golf was pushing the limits of thin-walled casting, which allowed them to push the driver to the 400cc, which also made it very forgiving.

You can’t forget it came stock with a matte gold finished Fujikura shaft that helped it stand out at retail and on the tee.

Ping ISI Tec

For a long time, the Ping Isi Tec was “THE driver,” and I have some fun facts about it.

It was the last Titanium Driver to ever be made in the United States, which also made it one of the most expensive drivers to ever hit retail shelves.

It was the number one driver on the long drive circuit, before other companies starting coming in and producing speciality heads for those competitors.

It had the first mass market adjustable hosel thanks to the plastic sleeve that could be ordered through the Ping WRX department. Each sleeve had a small code to signify the setting (RSS for example was Regular, Standard, Standard). The biggest issue was to be “adjusted,” it needed to be re-shafted, which wasn’t very economical.

Last but not least, the “loft” on the bottom wasn’t actually the loft at all, “ET” stood for effective trajectory, and like with anything Ping, there is a reason for this. The Isi Tec driver moved the CG a lot more forward that previous model. This made it lower spinning. The actual loft was about 1.5-degrees more than the ET. Ping wanted to make sure that players could keep the ball in the air with the new lower spin design—thus the birth of effective trajectory instead of loft to help players find the right head.

Mizuno MP-001

I’m sure you didn’t open this up expecting to see a Mizuno driver, but the 400cc MP-001 was a huge leap forward in driver technology, and like many things Mizuno, it slid way under the radar—just like the 460cc MP-600 that had the very first sliding weight track in a driver.

The MP-001 was the very first driver to use a carbon composite crown to help bolster mass properties and increase forgiveness. What this also did was make it sound muted and “thuddy” a sound that at the time was very different from other drivers on the market.

In traditional Mizuno style, the MP-001 was understated in its looks but had a lot of technology under the hood to earn its spot in the top five. A forged face helped reduced wasted material that could be positioned around the head to optimize flight. Unlike a lot of drivers at the time, it sat very square to the target making it a club preferred by better players.

 

What do you think GolfWRXers? Are there any 400cc-or-less drivers you think belong in the top five that aren’t included? Any that are included you don’t think should be? Have your say below!

Your Reaction?
  • 367
  • LEGIT39
  • WOW15
  • LOL12
  • IDHT4
  • FLOP14
  • OB9
  • SHANK82

Ryan Barath is part of the Digital Content Creation Team for GolfWRX. He hosts the "On Spec" Podcast on the GolfWRX Radio Network which focuses on discussing everything golf, including gear, technology, fitting, and course architecture. He is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

75 Comments

75 Comments

  1. Caleb

    Nov 18, 2019 at 5:03 pm

    I had that ping up to 3 years ago, lots of vibs tho cause hit 300 yards now, went to g30 and that got to loud/hurt ears,. Now g400 lst matrix 82 grams shaft 1/2inch butt trim. I use to hit 275 with hat old driver straight a kid for like 20 years

  2. Carp

    Nov 7, 2019 at 4:21 pm

    975jvs

    • Bob Kendall

      Nov 10, 2019 at 10:36 am

      Ryran, I would add the Titleist 983E.

  3. Mike

    Oct 28, 2019 at 2:45 pm

    obviously someone born after 1990.
    the game changers
    – the first Taylormade burner driver-early 80’s
    – the Callaway Big Bertha Driver- early 90’s
    – the Callaway Great Big Bertha Driver- mid 90’s
    – Titleist 975 driver- mid 90’s every good player had one
    – Taylor Made R7- game changer with movable weight

  4. Josh

    Oct 28, 2019 at 6:47 am

    Gotta have the Big Bertha on there as well as the Titleist 975d, Taylormade 360, and King Cobra. I agree on the ISI but think the others are a miss.

  5. Dan

    Oct 26, 2019 at 8:48 am

    All time?
    1. List is irrelevant without Callaway big Bertha.
    2. J’s Professional Weapon for us older guys
    3. Taylor Made Burner Plus w Aldila Tour Gold

    Thanks for

    • Ygolf

      Oct 26, 2019 at 6:21 pm

      MacGregor 693 circa 1950, GOAT.
      Then BB Memphis 10 shaft and half cord grip. It left the Taylormades in the dust.

  6. Deepred

    Oct 26, 2019 at 7:31 am

    Wilson Fatshaft Metal Matrix. As long as any driver I’ve ever hit even though it looks like a 3 wood today.

  7. Fergie

    Oct 25, 2019 at 10:39 am

    Isi Tec was not a reliable fairway finder for me. Launcher 360 I liked for forgiveness, but otherwise unremarkable. Not on the list, but my favorite was Titleist 975J, as sub-400cc drivers went.

  8. Noosh

    Oct 24, 2019 at 10:37 pm

    Me no likey kooche

    • Mike T

      Oct 25, 2019 at 2:48 pm

      Kduooooooooooche, kduoooooooooooooooche, kduooooooooooooooooooche…

  9. turfrex68

    Oct 24, 2019 at 10:16 pm

    The Northwestern powerkick shaft driver was a beast!!

  10. Ryan Barath

    Oct 24, 2019 at 8:20 pm

    Hi WRXer’s

    Thanks for all the feedback and replies. Some of you have pointed out some amazing honourable mentions including the eZone, and the J33P ( I still have a J33r – 420cc model that comes out multiple times a year ) and others from cobra and callaway.

    In fact the J33 was my 6th option since all that driver makes me think about is Stuart Abbleby mashing it around Kapalua in the early 2000s.

    I realize that the title leaves something to the imagination as far as “any” driver under 400cc including persimmon but I was sticking to modern just under 400cc clubs. Appreciate all the great replies.

    RB

    • hollabachgt

      Oct 25, 2019 at 9:33 am

      Might I suggest then you change the name of the article. Something like “Greatest 380-400cc drivers made since 2000”

      Your last two “of all times” articles has greatly ignored anything made outside of the last 25 years, which is frankly ignoring a tremendous amount of all time greats.

      I’m going to go out on a limb and guess that when you make an “of all time” article about irons you’re going to include clubs like the MP-14, MP-29, and Taylor Made TP-MB but not include the originator of that design, the Hogan Precision.

    • Young Zach Morris

      Oct 25, 2019 at 2:54 pm

      Should change the title to say “last 20 years” or “recent” instead of “all time.”

    • myron miller

      Nov 27, 2019 at 5:41 pm

      Thern why the title? It says best under 400cc, not best since 1990 (“with let’s take a look back at the top five 400cc-and-under drivers of all time.”). Grossly misleading and just flat out lousy writing to mislead people like that. Like others said, Big Bertha has to be on list as did the 975d. Way more classic of both of these than the mizuno or Ping.

      In fact, the 975d was the first meetal head driver that I switched to from wood heads. And I switched because it hit the fairway more often, not for the distance. It was overall shorter by about 20-30 yards from my persimmon driver but hit the fairway about 70-80% more.

      Taylor Made with Burner shaft is another all time revolutionary driver. Probably caused more people to switch to metal woods than any other club. But again it’s pre-1990.

      And I don’t see one Persimmon head driver on your list yet some of them were as revolutionary as anything nowadays. But it seems clear that you have limited experience with any drivers prior to 1990

  11. Moses

    Oct 24, 2019 at 7:27 pm

    R510TP and TecTI drivers were used to win ALOT of money back in the day. 😀 They were the longest drivers of the day without a doubt for me.

  12. Pineapple

    Oct 24, 2019 at 5:05 pm

    RB: come on buddy!!!! you are missing here some Legendary Models
    Callaway Great Big Bertha
    Titleist 975D
    Mizuno 300S
    King Cobra DeepFace
    among others. MP001??? hehehe no way!!!!

  13. Chuck Taylor

    Oct 24, 2019 at 5:05 pm

    Whaaaat!!! How’a bout the Northwestern driver from Target! That thing was bullet proof! Literally!

  14. Ben

    Oct 24, 2019 at 3:49 pm

    300 series from Taylormade.

  15. David Wusstig

    Oct 24, 2019 at 2:06 pm

    You nailed it on the Ping TiSi driver… I replaced mine just a few years ago with the Ping G20. The G20 was not longer, just more forgiving. My ‘miss’ on the TiSI was left and needed the RSL hosel (I’m short and needed a lower lie angle) but Ping (at the Phoenix HQ) could no longer source the adjustable hosels as they were end of life and no longer stocked otherwise I might still be hitting it! As a ~5 HC, I’ve yet to find a newer driver that I hit better or longer than the G20 now (G400 was the last I tested).

  16. t

    Oct 24, 2019 at 10:40 am

    This list without the Bridgestone J33P is just wrong

  17. Kale

    Oct 24, 2019 at 8:58 am

    510 TP all day baby.

  18. David

    Oct 24, 2019 at 5:58 am

    Uhhh. Callaway big Bertha! Cobra deepface!

  19. Mike Barnett

    Oct 24, 2019 at 5:56 am

    975D. Driver deserves top spot in the hall of fame.

  20. Bobby

    Oct 24, 2019 at 5:40 am

    Purespin Diamond face driver with the fat kevlar shaft

  21. jgpl001

    Oct 24, 2019 at 3:14 am

    Great Big Bertha and 983K – 2 greats in their day

    • Joe

      Oct 24, 2019 at 9:44 am

      I concur on 983K and Great Big Bertha. I picked up a mint 983K with an aftermarket 757 Speeder for $15 at a sporting goods store a few summers ago. Gamed it for a while and still scratch free. I remember dropping $400 back in the day on it. As for the GBB I had a sweet Red AJ Tech horizontally wound XFlex that used to rip.

      • George

        Oct 24, 2019 at 2:23 pm

        Dude you nailed it. The 983 clubs were so solid, especially with the Fujikura 757 Speeder shaft. I got a 983E with the speeder shaft for like $20 preowned from golf galaxy and I let my buddy borrow it when he was having his driver replaced. He was hitting it 350 and I’m just a little bit shorter than him off the tee but we were both bombing it as far or further than clubs that were made 2 years ago. Just such a solid club I think about going back to it all the time!

        • Dan

          Oct 26, 2019 at 8:54 am

          I still use my 905R w real 757
          Speeder and it’s still the longest driver I’ve ever owned. Longer than TM R1, M3, Callaways etc

  22. Matt

    Oct 23, 2019 at 11:42 pm

    Kuch sucks

    • Mad-Mex

      Oct 24, 2019 at 4:18 am

      Give it a rest loooooooooser! Bet your one of the idiots who screams “mash potatoe” or other equally obnoxious drunken childish remarks during tournaments and is the only one who thinks it’s funny,,, get a life!

      • beamanandwalkthecourse

        Oct 24, 2019 at 3:16 pm

        Winners spell potato without an e! ….ps Kutcher should not have been so cheap and ungrateful. The Mexican caddy helped Kutcher get back on the winning track!!!!

    • Not Mad Mex

      Oct 24, 2019 at 4:56 am

      No man, he’s a winner. Keep it up with the Matt Kuchar insults, like on every comments board. I like reading them. Kuchar is a fake tool anyways. I come to the comments section to read the stupid stuff. Love seeing people actually get bent because someone took 2 seconds to throw some shade. Deal with it.

      • Erik Morden

        Oct 24, 2019 at 7:52 am

        Matt is the Golf WRX troll. You could write something about anything in the golf world and he would hate it. You could be God himself and he would hate you. Like a previous poster said he is a tool his last name maybe Craftsman or Kobalt or SnapOn.

        • Not Aaron Judge

          Oct 24, 2019 at 8:57 am

          World needs Trolls too.

          • Mad-Mex

            Oct 25, 2019 at 8:30 pm

            Wish their parents had used birth control,,,,,,,,,,,,,,,,,

            • Not on my bridge

              Oct 26, 2019 at 9:44 am

              Pretty soon, the trolls will take over. They are the terminators of the future. People like you will explode and become non existent. They will be washed out by the power of the troll movement in the 2020’s…

      • Jeremy

        Nov 11, 2019 at 9:59 pm

        I totally understand thinking the internet is funny, but what you’re missing is that this is a website about golf. And you’re trolling. It is basically showing that you are not cool or smart or funny enough for 4chan, and come troll on a golf website. Gg.

  23. Rich Douglas

    Oct 23, 2019 at 9:30 pm

    Big Bertha, because it started the whole revolution towards bigger driver heads.

    Great Big Bertha–titanium.

    Any driver that was constructed contrary to good engineering–the Pod, Hammer, and whatever that hard (low-COR, it turns out) driver MacGregor came out with.

  24. Matt

    Oct 23, 2019 at 8:33 pm

    For me it was the Titleist 975J, but it might have been the after marked graphite design ys7 shaft that made it work so well for me. However I did try a golf buddies 510tp around that time and it was the first time I remember flying the bunker on my home courses 15th hole. Need less to say it left quite an impression but so did the seven hundred dollar price tag!

  25. lnholly

    Oct 23, 2019 at 7:57 pm

    Bridgestone Whopper

  26. tom

    Oct 23, 2019 at 7:22 pm

    No original Callaway Great Big Bertha Warbird???????? This is the driver that changed everything.

  27. Fhartt Dikkwater

    Oct 23, 2019 at 7:21 pm

    Today I learned golf started in 1995. There were no good drivers before this. Jack Nicklaus and Arnold Palmer used catapults for their tee shots then used blade irons, which they were the only ones in the galaxy legally allowed to play. Also learned thats its humanly impossible to use a 56* wedge for around the greens. Have to have a 60* with a special grind on it to accomplish this task.

    • Blowfeldher

      Oct 23, 2019 at 8:30 pm

      I like your name. I could see that on a Korn Ferry leaderboard right next to Sepp Straka the Bond villian.

  28. Curt

    Oct 23, 2019 at 7:07 pm

    Nobody could out drive me and my blue nike 400. Just made others mad and out of bounds.

  29. James

    Oct 23, 2019 at 7:06 pm

    MacGregor M85, Cleveland TC15, Powerbilt Citation, Wood Brothers Texan?

    Titleist 905S? Seriously? 975D long before.

  30. Paul

    Oct 23, 2019 at 6:18 pm

    The Cobra 370 SS unlimited was phenominal in its day, still by far the longest driver I’ve ever hit

  31. Joseph Runtz

    Oct 23, 2019 at 5:32 pm

    The Tony Penna Innovator- Cobalt was longer than the great Big Bertha, the Cleveland Launcher was a close 2nd as was Titleist’s 983
    Head to Head the Innovator took all challenger at that time.

  32. Old Zach Morris

    Oct 23, 2019 at 5:07 pm

    Opting for the 905S over the OG 975D is a travesty.

    And for the rando pick, they should have went with the Goldwin ADVP.

    • Patrick M.

      Oct 23, 2019 at 5:56 pm

      975D was great until 983 came out and then the 905s.

      975D was the best driver of the 1990s.

  33. TG

    Oct 23, 2019 at 4:54 pm

    Not including The Great Big Bertha is Hard to understand. So many tour pros played this in the late 90s.

  34. Bernie Mac

    Oct 23, 2019 at 4:49 pm

    Jack Hamm, HAMMER driver. Nuff said.

  35. Ol Skool

    Oct 23, 2019 at 4:48 pm

    Titleist Howitzer and Starship were gamechangers. However the Jack Hamm endorsed “Hammer” brought 400 plus yard drives into our bags.

  36. Jim

    Oct 23, 2019 at 4:37 pm

    Titleist 975D – Just ask that Woods guy.

  37. Jim

    Oct 23, 2019 at 4:31 pm

    “Of all time” should be removed from the title of this article, as it really means just the last 30 years, while conveniently ignoring clubs of the classic era of golf.

  38. Mardukes

    Oct 23, 2019 at 4:19 pm

    Toski CZAR 270cc

  39. Jim

    Oct 23, 2019 at 4:07 pm

    I would take “of all time” out of the title so people will know you are focused only on metal-woods of the last 30 years or so and completely ignoring the classic persimmons of the past.

  40. Jeremy Thompson

    Oct 23, 2019 at 4:06 pm

    Well the GBB and BBB were all north of 400cc so can’t be included. No original Big Bertha is a serious omission, the driver that was a complete game changer and industry changer. And no 975D either???

  41. Vas

    Oct 23, 2019 at 3:49 pm

    Leaving off Callaway is just trying too hard. Also, if you’re going to go Titleist, you’d need to go 983-series instead of the 905s. The 983E with the EI-70 Tour X was a game-changer for me, but most of my friends preferred the K.

    Agree about the E Zone 380. Unreal.

    • joe

      Oct 23, 2019 at 10:39 pm

      My 983E is still the best ever for me. GD Ys stiff shaft. I could really put it out there comfortably, and I could work it nicely.

  42. Jeff E

    Oct 23, 2019 at 3:42 pm

    I played a Titliest 975D for years, and it was head and shoulders above the 983 and 905. Loved that driver, and hit it better than the 510TP from Taylor Made as well…. I’d put it #1 on this list.

  43. PC

    Oct 23, 2019 at 3:31 pm

    Yonex E Zone 380…. the best head ever made.

  44. Ray Bennett

    Oct 23, 2019 at 3:26 pm

    I am surprised that the KZG PFT 300 didn’t get a mention.

  45. Kevin kelly

    Oct 23, 2019 at 3:23 pm

    The original Bobby Jones driver was as long as any driver I hit in my lifetime. I played a long time with persimmon and was very slow to switch to metals. Their 7.5 was awesome.

  46. Jose

    Oct 23, 2019 at 3:22 pm

    Actually I liked the Mizuno MP-001 375 driver because I could hit it of the deck fairly well.

  47. Tiger Woods

    Oct 23, 2019 at 3:19 pm

    Cmon man — no Great Big or Biggest Big?

  48. EgdewRich

    Oct 23, 2019 at 3:18 pm

    KZG CHII with Fujikura Vista Pro shaft. Smaller head but right there with TM 500 series!

  49. Ed LeBeau

    Oct 23, 2019 at 3:16 pm

    You left out Callaway’s Big Bertha
    That’s a serious omission

  50. drjacko

    Oct 23, 2019 at 2:59 pm

    Ryan, this is a great series! There is always a temptation to build a classic set out of your lists.

  51. A. Commoner

    Oct 23, 2019 at 2:35 pm

    RB: Give it up.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

GolfWRX Classifieds (10/29/20): PXG BlackJack, Toulon Garage, TP Mills custom

Published

on

At GolfWRX, we love golf equipment plain and simple.

We are a community of like-minded individuals that all experience and express our enjoyment for the game in many ways. It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball, it even allows us to share another thing – the equipment itself.

One of the best ways to enjoy equipment is to experiment and whether you are looking to buy-sell-or trade (as the name suggests) you can find almost anything in the GolfWRX BST Forum. From one-off custom Scotty Cameron Circle T putters, to iron sets, wedges, and barely hit drivers, you can find it all in our constantly updated marketplace.

These are some of the latest cool finds from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Member CC_Stryder – Toulon Rochester

Looking for a putter that gets its names from a city in New York state with a flow neck? Well…the name might not be exactly what you are looking for, but if a flow neck is what you are after, then look no further.

To see the full listing and additional pictures check out the link here: Toulon Putter

Member StillCantPutt – PXG BlackJack Putter

The newest putter from PXG at less than new price. Don’t let the seller’s name discourage you either, this thing should help you sink more putts.

To see the full listing and additional pictures check out the link here: PXG putter 

Member KC_Badger – TP Mills Custom

There is something about TP Mills putters that just screams classic, timeless, masterpiece. This example is no exception with its flow next and unique finish.

To see the full listing and additional pictures check out the link here: TP Mills Putter 

Remember that you can always browse the GolfWRX Classifieds any time here in our forums: GolfWRX Classifieds

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Building a home hitting net and simulator

Published

on

Golf and winter don’t get along very well, which is why so many golfers head indoors to practice facilities that offer year-round climate-controlled environments. The problem for many is these facilities can be busy and often require booking well in advance, which doesn’t work well for those seeking last-minute “driving range” flexibility.

So what is a diehard golfer to do? Build your own home hitting bay/simulator of course, and in my case build it on a budget to offer fun and flexibility all winter long.

Finding the right space

The first part of the process is accessing your wants and needs along with understanding any possible limitations your space might create. You have to consider which clubs you plan on using—and if that means hitting drivers, then you are going to need enough height and width to feel comfortable. The space I used is our garage, which is 12 feet wide and has 11-foot high ceilings, more than enough room to hit any club in the bag, and can easily accommodate both right and left-handed golfers.

Golf net and screen options

The Net Return hitting net

After figuring out your space, it comes down to selecting the best option for ease of use and flexibility—flexibility being the key ingredient in my situation. This is our only full garage bay, and if there is one thing I have gotten used to, it’s not having to clean snow off our car in the winter, so the net and mat had to be easily portable and storable.

If you are repurposing a space that won’t require flexibility, then there are a number of fantastic options including The Net Return and others that provide projector screen capability. On the highest-end, before getting into a full room renovation, Costco has a $20,000 “Sim in a box” powered by a Foresight GCQuad—let’s call this the dream scenario.

Since I have no intention of using a projector, nor do I have $20,000 just lying around, I ended up going with standard golf impact netting from Amazon: 10′ x 20′ golf impact netting, which allowed me to build my own net system which I can open or store within minutes.

The last thing to remember is you will be putting a lot of wear on a small part of the net caused by proximity, which is why if you plan to practice a lot it’s important to reinforce the impact area of the net. There is nothing more dangerous or damaging than a rubber projectile (in our case a golf ball) ricocheting around a small space at over 140 mph.

My solution was fine mesh netting from a local fabric store. It’s light enough not to put extra stress on the suspended cable supporting the net but strong enough to take a lot of abuse. The nice thing is at only $5 per yard and 60″, wide it’s very affordable and easily replaceable. An interesting thing to note, is a net doesn’t wear out specifically from just high-speed impact but from the friction of the spinning ball as it hits the net with shorter clubs, so the more layers the better.

The parts list

The list will vary depending on your situation and personal setup, but here are the tools & supplies I used when putting together my own net system.

Tools

  • Power drill and/or impact driver to drill pilot holes for the anchoring i-bolts. Since there will be a lot of tension on the supporting cable you have to be sure to put these anchors into wall studs.
  • Stud finder
  • Various size drill bits
  • Level
  • Tape measure
  • Screwdrivers
  • Pliers or vice grips

Supplies

There are a lot of ways to secure the net and create a welcoming space to use as a practice facility but these are all the supplies I used to install and support the net.

  • Stainless steel aircraft cable (2mm) rated for 900lbs.
  • Aircraft cable clamps
  • I-bolts to secure the cable to walls
  • Turnbuckle to properly tension the cable
  • Small hooks to hold the corners of the net up and around
  • Carabiners – Climbing rated ones are unnecessary, but they need to be sturdy
  • Carpet (for noise dampening and to prevent balls hitting the floor after falling from the net)

The Mat

Beyond the net itself, this is by far the most important piece of any home hitting bay or simulator because it needs to have enough give/compression in the impact area to not cause joint or muscle pain when hitting irons and wedge. This could require you to use extra padding under the mat or purchasing a separate hitting area depending on the base it is on.

Note: At the time of publication, I am currently waiting for the soft hitting area of my mat to arrive 

Getting fancy and simulated

This is the part where we go from home hobby setup to full-blown golf nut practice facility. The options beyond a basic net setup can get pretty crazy and for data and shot information it will require a substantial investment, with the most affordable being a SkyTrak unit followed by the all-new FlightScope Mevo+. After that, we get into more expensive options like the Foresight GC2 with HMT or the newest option the GCQuad followed by the radar-based Trackman.

All of these systems can work alongside various simulator software to provide playable course options, but they all come at an additional cost depending on the company and package.

For my personal use, I already happen to own a FlightScope Xi+ (which I purchased used), which requires a minimum of 16′ from unit to net to capture data, and since I don’t have any plans for playing rounds of golf, it is the perfect solution for getting the information I want in the space I have.

So whether you are looking for a full-blown golf simulator at home or just a space to help you keep those “golf muscles” loose over the cold winter months, use this GolfWRX how-to guide as a starting point for finding the best solution for you.

The How-to Video

Your Reaction?
  • 23
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

WITB GolfWRX Members Edition: Kblahey

Published

on

Recently we put out the call for our members to submit their WITBs in our forum to be featured on the GolfWRX front page. Since then, our members have been responding in numbers!

Now it’s time to take a look at the bag of Kblahey.

*Full details on the submission process can be found here, and you can submit your WITB in this forum thread.*

Member: Kblahey

Handicap: 7

Kblahey WITB

Driver: Ping G (10.5 degrees set at neutral)
Shaft: Ping Tour 65 S

3-wood: TaylorMade M5 (15 degrees set at neutral)
Shaft: Mitsubishi Tensei Orange S

5-wood: TaylorMade M3 (19 degrees set at neutral)
Shaft: Mitsubishi Tensei Blue S

Irons: TaylorMade MC 2014 (3-PW)
Shaft: KBS Tour S

Wedges: Titleist SM7 Jet Black (54-14, 58-10 degrees)
Shaft: True Temper Dynamic Gold Wedge Flex

Putter: Scotty Cameron Studio Stainless Newport 1.5 Prototype

Golf Ball: TaylorMade TP5x

Grips: Golf Pride Tour Velvet +4

Get submitting your WITB in our forum as we’ll be publishing more and more of them on our front page over the coming days and weeks.

Feel free to make it your own too by including some thoughts on your setup, your age, handicap, etc. Anything you feel is relevant!

Share your WITBs here.

Your Reaction?
  • 6
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending