Equipment
2019 TaylorMade P790Ti Irons: Pure Premium Power
Born from the quest to make great, greater, the 2019 TaylorMade P790Ti Titanium Irons go way beyond the original P790 in both materials and pushing the limits of speed. 2019 Taylormade titanium irons been the buzz on the street. By pairing some of the lightest and strongest materials with some of the most mass dense in one club, the engineers at TaylorMade have created a premium iron for the player looking for premium performance.
The body of the P790-Ti is iron is cast from 911 titanium—this is an important note because when you compare (in general terms) Ti vs. steel, their mass properties are vastly different.
Let’s do some science!
Stainless steel comes in around 8 g/cm3, Whereas titanium is 4.5 g/cm3. That makes steel 43 percent heavier than its titanium counterpart, which means the P790Ti is saving a TON of weight in its construction by using it as the whole body of the head including the face, but we’ll get to that in a minute.
If you think about a solid steel clubhead played at 37″ (usually a 7-iron), the head weight will be around 268g. If you use the above math, then the same clubhead made from titanium would only weigh 153g (rounded up). So how do we get that mass back to where it needs to be without making the head enormous? Tungsten: one of the most (stable) mass dense metals around.
The TaylorMade P-790Ti iron has up to 119g of tungsten in each clubhead to push the limits of forgiveness and drive the center of gravity as far back and as low as possible—that’s why the titanium has been placed on the exterior of the club’s frame.
So now to that face.
Supported by TaylorMade’s SpeedFoam, the machined titanium face is thin to produce maximum ball speed. By machining it, rather than casting, TaylorMade can precisely control the dimensions to save every last bit of weight.
With a face this fast and a CG going so far back, Chris Berman would have to actually take a breath when telling you about it.
You need stronger lofts—it’s physics and function rather than playing a numbers game. Without the stronger lofts, each iron wouldn’t hit the proper window for its trajectory. The other part of this that is often overlooked is the target market for these styles of irons—players NOT at the top end of clubhead speed; players wanting a higher flight and longer distances. Yeah, it’s fun to watch tour players mash 7-irons 220 yards for the cameras—I wish I could do that—but that’s not who these clubs are designed for.
This leads us to the rest of the package.
Obviously, the term “stock” is now a loose reference to a suggested final build based on player testing, but this sheds light on the what TaylorMade wants to accomplish with these irons. The paired shafts are, for steel, the new Nippon NS Pro 950 GH Neo (an update to their extremely popular 950 GH). For graphite, the shaft of choice is the Mitsubishi MMT available in varies weight options—see below.
- LIKE123
- LEGIT18
- WOW13
- LOL13
- IDHT3
- FLOP6
- OB4
- SHANK29
View this post on Instagram
Driver: TaylorMade Stealth 2 Plus (10.5 degrees)
Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)
5-wood: TaylorMade Stealth Plus (19 degrees)
Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)
Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)
Putter: Scotty Cameron Select Newport 2 Prototype
Check out more in-hand photos of Drew Brees’ clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)
MJ Daffue’s Scotty Cameron T-11 Prototype
MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.
Scotty Cameron T-7.5 Prototype
We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.
Alex Fitzpatrick’s Bettinardi SS16 DASS
Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.
Steve Stricker’s Odyssey White Hot No. 2
This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.
Doug Ghim’s Scotty Cameron T-7 Prototype
This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.
Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.
The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.
Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.
Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!
- Check out the rest of our photos from the 2024 Zurich Classic
- Check out in-hand photos of Daniel Berger’s full WITB here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Drew Brees WITB 2024 (April)
View this post on Instagram A post shared by GolfWRX (@golfwrx) Driver: TaylorMade Stealth 2 Plus (10.5 degrees)...
Daniel Berger WITB 2024 (April)
Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here. Driver:...
Rasmus Højgaard WITB 2024 (April)
Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic. Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)...
Rory McIlroy WITB 2024 (April)
Rory McIlroy what’s in the bag accurate as of the Zurich Classic. Driver: TaylorMade Qi10 (9 degrees) Shaft: Fujikura Ventus...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Aaron
Aug 13, 2019 at 7:45 am
4.5g to 8g is not 43% heavier.
It’s 43% lighter
the truth
Aug 13, 2019 at 6:29 am
$400 per club AND you need more wedges?
Andy
Aug 13, 2019 at 5:26 am
The AW has finally broken through 50 degrees and 43.5 degree PW. Wow.
Pillow Talk
Aug 13, 2019 at 4:07 am
$2700? That’s all? 😀
Moses
Aug 12, 2019 at 10:30 pm
Wow I can probably hit the 9 iron 150 yards.
Eric
Aug 12, 2019 at 7:52 pm
I’d like to see the P790Ti UDI, with the same aesthetics and 14-17* of loft. Looks so much better than the GAPR in my opinion. Just change where the tungsten is placed to get High/Mid/Lo equivalent of GAPR.
Stewart
Aug 12, 2019 at 5:16 pm
These look great but I’m not likely to buy at this price.
I’ve no issue with companies having a product at this level.
KC
Aug 12, 2019 at 5:00 pm
$2700 for a 7 club set of irons. Go home Taylormade…you’re drunk.
JP
Aug 12, 2019 at 9:39 pm
Drunk and stupid at the same time.
Clay
Aug 12, 2019 at 4:47 pm
5.5 degree gaps in the short irons? yikes
Travisty
Aug 12, 2019 at 4:17 pm
Pure Premium Pricing—fixed that for you
jason
Aug 12, 2019 at 12:30 pm
look how the masacred my boy.
Bushwood Caddie
Aug 12, 2019 at 11:30 am
Running out of ideas to have a different type of club for every release? Their big tech is ICT (inverted cone technology) which they had back several years ago. Nice irons, but not at that price!
dat
Aug 12, 2019 at 10:37 am
NO. Please for the love of Golf stop with these joker clubs.
Ted
Aug 12, 2019 at 9:24 am
Ugly
JP
Aug 12, 2019 at 9:08 am
And the price? A gazillion dollars a set?
.
And the face is cast THEN machined. Do t let the wording confuse. It’s cast.