Connect with us

Equipment

Full details on Ping’s new i500 and i210 irons, and Glide Forged wedges

Published

on

In recent weeks, we’ve spotted a number of different Ping irons and wedges. We saw Tony Finau testing an i500 driving iron, we saw Bubba Watson using Glide Forged wedges, and we also spotted photos of a new i210 iron. The problem was, Ping wasn’t giving up any information on the new clubs, so we didn’t know when or if they’d would be released to the public, or what was different about the new products.

Now, we have all of the info on the Ping i500 and i210 irons, and the Ping Glide Forged wedges. We were lucky enough to have Marty Jertson, Director of Product Development at Ping and a recent 2018 PGA Championship qualifier, on our Two Guys Talking Golf (TG2) podcast to explain the designs and technology for the three different product releases. Snippets from the full podcast are embedded below. Additionally, we provide all of the necessary spec and pricing information.

All of the products are now available for custom fitting or pre-order at authorized Ping shops around the United States.

Click here for comparison photos against PXG, Artisan and P-790 clubs.

Ping i500 irons

The Ping i500 is actually quite similar to the G700 iron, which also has a hollow-body construction, but yet the i500 has a sleeker-shaped profile. The i500 irons are built with C300 maraging steel faces and 17-4 stainless steel bodies; Ping says this design increases ball speed, lowers spin and creates higher-flying shots.

Available in 3-PW and UW, the Ping i500 irons will sell for $175 per club with a steel shaft and $190 per club with a graphite shaft. Stock steel shafts will be the True Temper Dynamic Gold 105 (R300, S300), stock graphite shafts will be the UST Mamiya Recoil ES SMAC (760A, 780R, 780S), and a number of aftermarket shafts are also available at no upcharge. The stock grip is the Golf Pride Tour Velvet (Blue -1/16 inches, Red -1/32 inches, Aqua -1/64 inches, White Std., Gold +1/32 inches, Orange +1/16 inches).

In-hand photos of the new Ping i500 irons

Ping i210 irons

Replacing the i200 irons, the new i210 irons are made from 431 stainless steel, and they have a larger and softer elastomer insert. The bigger insert is said to not only increase perimeter weighting for greater forgiveness, but also to help fine-tune swing weight and create an overall softer feel. The shaping of the irons have also been refined, according to Ping.

Available in 3-PW and UW, the Ping i210 irons will sell for $137.50 per iron with a steel shaft, and $152.50 per iron with a graphite shaft. The stock steel offering is a True Temper Dynamic Gold 120 (S300, X100), the graphite offering is an Alta CB (Soft R, Regular, Stiff), and there are a number of aftermarket options with no upcharge.

In-hand photos of the new Ping i210 irons

Ping Glide Forged wedges

Forged from 8620 carbon steel, the new Ping Glide Forged wedges have a “sleek, high-spinning blade-style design with a soft, pleasing feel,” according to a Ping press release. They’re the product of Louis Oosthuizen, Stan Utley and Todd Anderson working with Ping Engineers to develop a wedge with greater feel and versatility, says Ping. Like the Glide 2.0 wedges, the new Glide Forged wedges have wheel-cut grooves, which have a sharp edge radius to increase friction for more spin and trajectory control.

The new Glide Forged wedges are also customizable with different graphics, stamping and paint fills, which are highlighted below.

  • Graphic Options: Mr. PING logo, American flag, Arizona desert scene, Boomerang
  • Stamping Options: 1) Up to three characters (A-Z, 0-9) in one of three locations (toe, center or heel); 2) Two characters applied in scattered fashion; 3) Mr. PING logo scattered.
  • Paint-fill options: Black, Gold, Brown, Orange, Purple, Red, Blue, Yellow, Green, White, Silver, Maroon

Check out ping.com/glideforgedcustom to design your wedges.

Ping’s new Glide Forged wedges are available in 50, 52, 54, 56, 58 and 60 degree lofts, and they will sell for $217.50 per wedge with a steel shaft and $232.50 per wedge with a graphite shaft. The stock steel shaft will be a True Temper Dynamic Gold S300, the graphite shaft will be an Alta CB (Soft R, Regular, Stiff), and there are more aftermarket shafts available at no upcharge.

Listen to the full podcast on SoundCloud below, or click here to listen on iTunes!

In-hand photos of the new Ping Glide Forged wedges.

Related

Your Reaction?
  • 147
  • LEGIT9
  • WOW5
  • LOL121
  • IDHT1
  • FLOP121
  • OB147
  • SHANK176

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

12 Comments

12 Comments

  1. Brandon

    Jul 16, 2018 at 9:25 pm

    In before that guy who always complains about irons not being true forgings anymore. He is right, but does it really need to be repeated on every article?

    • ogo

      Jul 17, 2018 at 12:50 pm

      These clubs are fake-forged because they are only cold stamped coin forged steel castings. They are not hot forged like Mizunos and Miuras which alters the grain structure of the steel for that soft buttery forged feeeel… ;-(

  2. golfraven

    Jul 16, 2018 at 5:23 pm

    what is happening here? you would thing they would put the True Temper Dynamic Gold 105 (R300, S300) shaft in the i210 and not theTrue Temper Dynamic Gold 120 (S300,X100). X100 for a GI iron – wtf?

    • Alec

      Jul 16, 2018 at 6:41 pm

      I mean, the i210 isn’t a game improvement iron

  3. Boyo

    Jul 16, 2018 at 11:27 am

    I have the i200’s and would kill for a matched SW at 54 degrees. The Glide’s don’t cut it…..

  4. DB

    Jul 16, 2018 at 11:19 am

    Wedges are pricey – but being forged with tungsten plug in the toe, custom graphics, etc., probably does increase their cost significantly.

    New irons look great.

  5. Zbb

    Jul 16, 2018 at 9:46 am

    Hit both yesterday. Thought the i500 were very nice and looked great. Effortless distance.

  6. jake

    Jul 16, 2018 at 9:46 am

    Not sure how they’re going to move many wedges @ $217

    • Dan

      Jul 22, 2018 at 5:48 pm

      Why not? A custom Callaway MD is $230, a custom Wedge works BV wedge is around $240. Ping is cheaper than both.

  7. dat

    Jul 16, 2018 at 9:23 am

    Pretty expensive, even for Ping.

  8. carl

    Jul 16, 2018 at 9:08 am

    $217 for a wedge? wow

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 8
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending