Decades after their introduction, there are still a lot of misconceptions about graphite iron shafts — especially when it comes to the question of who graphite iron shafts are for and how they can help a golfer’s game.
This video breaks down the origins of these misconceptions to help golfers understand the truth about graphite shafts. It also offers some great tips for club builders who are building with graphite iron shafts for the first time.
- LIKE30
- LEGIT2
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK5
Whats in the Bag
Daniel Berger WITB 2024 (April)
- Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X
6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X
Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)
Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)
Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0
Grips: Golf Pride Tour Wrap
Ball: Titleist Pro V1
Check out more in-hand photos of Daniel Berger’s clubs in the forums.
- LIKE3
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK0
Equipment
Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans
What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.
At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.
Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.
Rory McIlroy
Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Alex Fitzpatrick
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Daniel Berger
Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap
Rasmus Hojgaard
Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC
Alejandro Tosti
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4
James Nicholas
Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet
Kevin Streelman
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet
Sang-moon Bae
Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet
Russ Cochran
Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align
MJ Daffue
Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align
Check our more photos from the Zurich Classic here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE3
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
Johnny Taylor
Jan 2, 2019 at 8:39 pm
Ryan,
Looking for a graphite shafts for irons in the 80-110 gram weight range. What would you recommend that for performance and feel at a reasonable price?
Johnny
jimmy
Mar 14, 2018 at 10:20 pm
Graphite shafts have been on the market for over 30 years and they still haven’t engineered out the problems inherent with them. The only reason they still exist is cause they can bring out new models with fancy eye-catching new graphics annually…. to suck in the gullible gearheads.
WA
Mar 14, 2018 at 12:46 am
If this guy wasn’t a club builder he would be working at a quickie lube joint.
Ignat
Mar 14, 2018 at 5:08 pm
huh ????
frank irwin
Mar 13, 2018 at 7:19 pm
What type of tip weights do you recommend using for graphite shafts?
Ryan B
Mar 13, 2018 at 7:53 pm
I have found that these work quite well because you lose minimal insertion depth:
https://www.hirekogolf.com/7-5g-weight-plug-for-graphite-wood-iron-shaft.html
Max
Mar 13, 2018 at 5:25 pm
Love the steelfibers and recoils. Looking forward to try the Mitsubishi Thump’s and Ot’s. Driver speed: 108-110 mph.
Love the feel of graphite. Pure strikes feel better.
jimmy
Mar 14, 2018 at 10:17 pm
you obviously lie like a gearheaded duffer… sooo obvious
steve
Mar 13, 2018 at 4:16 pm
The best graphite shaft on the market is the $1200 Seven Dreamer shafts that are cured in an autoclave which drains out the plastic epoxy component to a minimum. All the other graphite shafts are oven-cured which leaves in the compromising epoxy plastic that causes the floppy soggy shaft tip inconsistent action.
Save your money for the superior Seven Dreamer graphite shafts, boys.
steve
Mar 13, 2018 at 4:18 pm
FYI here’s the link to the Seven Dreamers GolfWRX article:
http://www.golfwrx.com/489200/a-qa-with-seven-dreamers-about-its-1200-shafts/
KevinS
Mar 13, 2018 at 3:46 pm
Just a couple comments. I’m an “older” golfer and club tinkerer and I have to take exception with your point that firm or stiff graphite shafts for irons weren’t really available “back in the day.” They were. You just had to search more for them, high and low. Back in the early ’90s, I reshafted a set of Ram Laser FX irons with models called “Superior Graphite Shafts” by Norman Sports Company — stiff or firm flex. The reshafting, which I did myself, was fairly successful for an amateur, but as you mentioned, I had to end up applying lead tape to the backplate of many. Some not at all (PW); some a little (7 or 8 iron), some a lot (6 iron). Still don’t know today why they all came out so different in swingweight. Also, because of the overall weight and swingweight, I left the reshafted clubs a half-inch longer than the steel counterparts. I still use these clubs from time to time, but ended up abandoning them eventually, not because of the graphite shafts, but because of the Ram Laser’s sharp(er) leading edge and relatively flat sole. Somebody told me I could also grind down the leading edge, but I had fooled around with them enough. I still take them out and use them and like them and would compare the flex comparable with my Hogan Apex shafts #4, albeit lighter. To this day I still have not swung or hit any graphite shafted irons with shafts that feel as firm as the ones I installed in the early 90s. I know they exist; I just haven’t experienced them, even those marked “S.” These cavity-back forged Ram irons with graphite shafts have always launched higher and flown higher, so I have much more difficulty hitting “flighted” or knock-down short-iron shots with them.
Ryan B
Mar 13, 2018 at 7:57 pm
HI Kevin,
Thanks for watching. You are correct that shafts were available but, like I said in the video – to the general consumer something like what you mention was not a very easy to find option for those who shopped at either their local proshop or golf store. This along with misinformed sales people lead to a lot of the misconceptions I talked about.
I really appreciate you watching the video and taking time to comment.
Cheers
steve
Mar 13, 2018 at 12:30 pm
The problem with graphite shaft are at the tip section where the epoxy-graphite matrix behaves like a floppy soggy piece of plastic spaghetti… unless heavily reinforced with exotic materials and even steel fibers.
Any pro using graphite in their irons has the shaft tips heavily reinforced with space age materials or metal strands to make the shaft tips behave predictably.
That was the problem with graphite shafts when introduced 40 years ago and the problems are still not solved. Floppy soggy plastic straws.
steve
Mar 13, 2018 at 4:37 pm
Furthermore, driver shaft tip diameters were boosted to 0.350″ from the old standard of 0.335″. This has a significant affect on tip torque. This increase was done to increase tip torque resistance on graphite shafts and to hopefully stabilize the tip as it twists and flexes.
FYI… torque resistance for a thin-walled tube varies as the cube of the diameter. Even though it’s only about a 5% diameter increase, the torque resistance is increased by ~13%. It still doesn’t solve the problem of floppy soggy graphite shaft tips. Only the Seven Dreamers shafts fix the problems.
George
Mar 13, 2018 at 7:52 pm
FYI stiff graphite shafts can be achieved without going to exotic fibres.
Defy you to compare Nunchuk Xi iron shafts against any of the ridiculously expensive exotics.
Patents on Nunchuk include the method of wrapping the graphite. Defy you to find a stiffer tip, by design, on the market. Virtually zero droop, twist or kick at impact.
Cheers
PS video on nventix.com, Dallas Texas
jimmy
Mar 14, 2018 at 10:15 pm
A shaft with zero droop, twist or kick at impact would be totally unplayable because it would eliminate the whipsnap necessary in final release going into impact. Such a shaft would reduce the swing to shovelling and injure your hands and wrists too.
Duncan Marc
Mar 13, 2018 at 11:39 am
If torque has nothing to do with accuracy, how can it be a factor? Contradictory statement.
Mat
Mar 13, 2018 at 4:22 pm
Torque is very important. Just make sure it is a low twist graphite. But ya, that statement was way, way off.
Ryan B
Mar 13, 2018 at 8:02 pm
Hi Duncan,
Thanks for watching the video.
What I mean when I talk torque is that it is not a deciding factor when it comes to accuracy. It is an aspect of design for engineers as far manufacturing goes, but the overall profile and weight will have a bigger impact.
Torque is really a byproduct of the overall design of the shaft and not the deciding factor as far as final accuracy goes.
Thanks for watching!
steve
Mar 13, 2018 at 9:01 pm
“torque” is imposed on the shaft tip by the eccentric clubhead attempting to dynamically align to the shaft axis in the downswing and through Release.
There is a “centrifugal” torque imposed by the clubhead that results in shaft droop; and, there is axial torque that is created by the eccentric CofG of the clubhead closing the driver face and the iron face if the leading edge is offset significantly.
Torque is most certainly a large factor in clubface accuracy at Impact.
George
Mar 14, 2018 at 8:02 am
FYI stiff graphite shafts can be achieved without going to exotic fibres.
Nunchuk Xi iron shafts compare against any of the ridiculously expensive exotics.
Patents on Nunchuk include the method of wrapping the graphite. Challenge you to find a stiffer butt and tip, by design, on the market. Virtually zero droop, twist or kick at impact.
Cheers
PS video on nventix.com, Dallas Texas