Equipment
Miura’s new MC-501 and 601 irons, Tour Series wedges, KM-009 putter (2018 PGA Show Demo Day)
Miura, the company known best for its forged irons, unveiled two new irons at the 2018 PGA Show Demo Day, along with new Tour Series wedges and a KM-009 putter.
MC-501 irons
According to the company, the MC-501 irons — the MC stands for “muscle cavity” — are like a mix between blade irons and cavity backs; they have the look of a blade, but also have wider soles and longer blade lengths for greater forgiveness. Actually, a Miura representative told us the 501 irons, which are forged from 1020 carbon steel, have the longest blade lengths and widest soles of any iron Miura has ever made. We’re told, however, that all of the lofts are in line with other Miura blades, as is the expected launch and spin the irons produce.
The MC-501 irons will launch in North America on February 20, and they will sell for $260 per club head.
See all of our photos from the 2018 PGA Show Demo Day.
IC-601 irons
Miura’s new IC-601 irons (4-PW) — they are the iron-set extensions of Miura’s previous ICL-601 driving irons — have hollow cavities for more ball speed, and they have stainless steel back weights to drive CG rearward and raise MOI. They’re made from 455 carpenter steel and will sell for $280 per head.
Tour Series wedges
The first milled wedges from Miura, called the Tour Series, have progressive center of gravities (higher CG in the higher lofts and lower CG in the lower lofts) throughout the line. They’re forged from 1020 carbon steel, and have C-grinds with soles that are narrow in the lower lofts, and get progressively wider as loft goes up.
The Tour Series wedges are available in 48, 50, 52, 54, 56, 58 and 60-degree options, and will sell for $280 each.
KM-009 putter
Lastly, Miura unveiled a new KM-009 putter that, according to Miura, has an enhanced milling process, upgraded graphics, and a lengthened hosel for a bit more face-balance than previous KM putters. A Miura representative estimates the toe hang has gone from 60 degrees down to 45 degrees due to the hosel adjustment.
Available on February 20, the putters will sell for $400 apiece.
See all of our photos from the 2018 PGA Show Demo Day.
- LIKE50
- LEGIT6
- WOW7
- LOL1
- IDHT0
- FLOP2
- OB0
- SHANK10
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head
From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition. $325 shipped.”
To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.
From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.
Specs/ Additional Details
-100% Milled, Aluminum/Bronze Alloy (310g)
-Original Anser Design
-PING PP58 Grip
-Putter is built to standard specs.”
To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes
As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.
The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.
On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.
Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.
At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.
“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.
Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.
“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.
“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.”
In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.
Not enough changes for you? There’s one more.
On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.
According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.
“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.”
See Morikawa’s full WITB from the 2024 RBC Heritage here.
- LIKE78
- LEGIT8
- WOW2
- LOL6
- IDHT2
- FLOP4
- OB3
- SHANK6
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole5 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole4 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 days ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
Jerry
Jan 24, 2018 at 11:17 am
Tour Series milled wedges look good – need more info. I don’t have the speed for the blades
Benny
Jan 24, 2018 at 6:20 am
Awesome gear. Just so damn expensive amd recently I owned a raw set of Tourney Blades. I was not impressed with them at all. I have had better feeling irons at 13 the price. Don’t hate me for saying this fellas!
Skip
Feb 1, 2018 at 1:49 pm
You’re not wrong. The Giken stuff feels way better than the Tournament Blade IMO.