Equipment
Bettinardi’s new BB-Series and Inovai 5.0 putters, and H2 303 SS wedges
Over recent years, Bettinardi has employed two-year product cycles for its most popular lines; the Queen B and Studio Stock putters have launched on even-numbered years, while its BB-Series and Inovai putters have launched on odd years. Being that it’s 2017, Bettinardi is rolling out its new BB-Series lineup, and a new Inovai 5.0 putter.
In the new BB-Series, you’ll notice new Super-Fly Milled faces, matte black finishes with hints of electric yellow, slight adjustments to classic head shapes, and a few new models, as well. Each of the putters will sell for $300, and come with electric yellow Lamkin grips. The Inovai 5.0 (also $300), which follows up the Inovai 3.0, has been redesigned for more MOI (moment of inertia, a measure of forgiveness), and shifts away from counterbalancing that the Inovai putters have used in previous models.
Also part of this launch of new products, Bettinardi is announcing its H2 303 Stainless Steel wedge that replaces the previous H2 wedges released in 2014, and they will sell for $165 apiece.
Below is everything you need to know about each of the products, and see more photos of the lineup here.
BB1
This classic head shape has been given a slight adjustment to performance. While BB1 putters of the past have had a 3/4 toe hang, which Sam Bettinardi, Vice President of Sales and Marketing, calls “tough putters to use,” the 2018 BB1 has a 1/2 toe hang that makes it easier to square the face. The design is essentially a replica of a putter that Sam Horsfield — who Bettinardi calls “one of the best putters I’ve ever seen” — has in his bag.
- Weight: 350 grams
- Material: Soft Carbon Steel
- Finish: Stealth Black
- Face Milling: Super-Fly Mill
- Lie/Loft: 70 degrees/3 degrees
- Length: 33-35 inches
- Dexterity: Right and Left-Handed
- Toe Hang: 1/2
BB29
The BB29 is a new model that’s based on a Japan-only release, and it features a “boxy, square frame,” according to Bettinardi. It has a mid-slant neck that creates a bit more offset than the BB1, helping to keep the hands in a more forward-pressed position, thus locking the hands in place throughout the stroke.
- Weight: 350 grams
- Material: Soft Carbon Steel
- Finish: Stealth Black
- Face Milling: Super-Fly Mill
- Lie/Loft: 70 degrees/3 degrees
- Length: 33-35 inches
- Dexterity: Right handed
- Toe Hang: 1/2
BB39
“As a mallet guy, this is my favorite putter in the series, says Bettinardi. And he’s not the only one; Francesco Molinari is also currently using a production model of the BB39 putter. In this year’s model, the flange has been extended and given a longer sightline, which Betinardi says will frame the ball nicely. Being that it’s a bit wider than previous BB39 models, it will also be a bit more forgiving on off-center hits because of the increase in MOI.
- Weight: 350 grams
- Material: Soft Carbon Steel
- Finish: Stealth Black
- Face Milling: Super-Fly Mill
- Lie/Loft: 70 degrees/3 degrees
- Length: 33-35 inches
- Dexterity: Right handed
- Toe Hang: 1/8
BB56
The purpose of the BB56 design is to raise CG (center of gravity) in order to get the ball rolling faster along the putting surface. It’s body is made from 6061 military grade aluminum, and the sightline section is made from 303 stainless steel. Being that SS is heavier than aluminum, the weight placement raises overall CG, helping golfers impart less backspin on the golf ball, and therefore, less hopping/skipping.
- Weight: 350 grams
- Material: 6061 Aluminum and 303 Stainless Steel
- Finish: Stealth Black
- Face Milling: Super-Fly Mill
- Lie/Loft: 70 degrees/2 degrees
- Length: 33-35 inches
- Dexterity: Right and left-handed
- Toe Hang: 1/8
Inovai 5.0 and 5.0 Center shaft
The new Inovai 5.0 putters have 6061 aluminum bodies, and 303 stainless steel rear sections that are screwed into those bodies; the design brings more weight toward the back of the putter, thus raising MOI. This year’s Inovai putters also go away from the previous counterbalancing concept, which Bettinardi says many golfers are no longer employing.
- Weight: 358 grams
- Material: 6061 Aluminum and 303 Stainless Steel
- Finish: Black Anodized and Hand-Polished Stainless Steel
- Face Milling: F.I.T. (Feel Impact Technology)
- Lie/Loft: 70 degrees/2 degrees
- Length: 33-35 inches
- Dexterity: Right Handed
- Toe Hang: 1/8
H2 303 SS wedges
Bettinardi’s new H2 303 wedges, as their names imply, are forged from stainless steel, a material that Bettinardi says “no one else in the wedge industry is using.” According to Bettinardi, the SS material will be more durable than other common materials used in wedges, and it will not rust. As with the previous wedge release, Bettinardi has chosen to use the versatile C-grind. What’s new in the H2 303 wedges, however, a honeycomb milling that Bettinardi says will impart more friction on the golf ball to impart greater spin, and therefore green-side control.
The wedges are available in six loft options ranging from 50-to-60 degrees, and have three bounce options (8, 10 and 12 degrees). They come stock with KBS Tour Hi-Rev shafts and Lamkin Crossline Cord grips.
See more photos and discussion about Bettinardi’s new products here.
- LIKE70
- LEGIT7
- WOW3
- LOL5
- IDHT1
- FLOP5
- OB2
- SHANK15
Whats in the Bag
Daniel Berger WITB 2024 (April)
- Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X
6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X
Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)
Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)
Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0
Grips: Golf Pride Tour Wrap
Ball: Titleist Pro V1
Check out more in-hand photos of Daniel Berger’s clubs in the forums.
- LIKE3
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB1
- SHANK0
Equipment
Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans
What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.
At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.
Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.
Rory McIlroy
Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Alex Fitzpatrick
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC
Daniel Berger
Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap
Rasmus Hojgaard
Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC
Alejandro Tosti
Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4
James Nicholas
Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet
Kevin Streelman
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet
Sang-moon Bae
Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet
Russ Cochran
Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align
MJ Daffue
Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align
Check our more photos from the Zurich Classic here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE3
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
Val
Nov 15, 2017 at 7:52 pm
I just love all those Betty’s and I’m thinking of buying one of each and then testing them on my backyard putting green for several weeks. I’ll keep the winners and sell off the losers on eBay.
(p.s. I’m a lottery winner and price doesn’t matter to me.)
Rich
Nov 15, 2017 at 4:25 pm
Looks like WilsonStaff 2012
eric
Nov 15, 2017 at 11:43 am
What is the finish on these? Looks like its painted on or sprayed on like an odyssey, personally not a fan makes it look like a cast head which we know its not because its CNC milled.
DB
Nov 15, 2017 at 9:02 am
Nice to see that BB1 head shape released. We had been seeing that head in lots of the Bettinardi Tour pictures.
Curiously no address shot? I would think it looks pretty clean at address. Maybe a little non-traditional with the single straight-line bumper, but probably looks really clean.
DB
Nov 15, 2017 at 1:53 pm
Meant to say BB29, but the BB1 looks good too. Nice job Bettinardi.