Here’s a step-by-step guide on how to safely and properly re-grip a golf club, and a comprehensive list of the tools you’ll need.
Leave your requests for more “how-to” club building tutorials in the comments below, or Tweet them @RDSBarath.
- LIKE34
- LEGIT10
- WOW0
- LOL1
- IDHT0
- FLOP2
- OB2
- SHANK18
Instruction
Clement: Why your practice swing never sucks
You hear that one all the time; I wish I could put my practice swing on the ball! We explain the huge importance of what to focus on to allow the ball to be perfectly in the way of your practice swing. Enjoy!
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK2
Equipment
Mitsubishi Diamana WB: Club Junkie takes a technology deep dive
Earlier this week, Mitsubishi announced the return of its iconic Whiteboard profile with the new Diamana WB shaft.
In our launch story, we offered a rundown of the key technology in the new WB — 80-ton Dialead pitch fiber, Aerospace-grade MR70 carbon fiber, Consistent Feel Design, and the Xlink Tech Resin System. To go deeper, however, we enlisted our Resident Club Junkie and bona fide shaft nut, Brian Knudson, to track down someone from Mitsubishi at the PGA Show. Fortunately, Mitsubishi’s Director of Global Aftermarket Sales, Jonathan Alongi, was on hand to answer all of BK’s questions.
Check out their discussion about the new WB, as well as the 20th anniversary of the original design, in the video above — time stamps of key points below, including a definitive answer as to how the surfboard graphic ended up on the original Whiteboard in 2004!
- :40 – Mitsubishi Japan expands to the U.S. in 2004
- :50 – “The shaft that set the standard”
- 1:12 – “The ‘board is back”
- 1:45 – WB or Whiteboard? Or both?
- 1:55 – The first iteration of the sixth generation of Diamana
- 2:10 – Incorporating key technology from a 20-year journey
- 3:10 – Modifying the tip section for more ball speed
- 3:50 – Delivering ball speed in a low-launch, low-spin shaft
- 4:20 – Drilling down on the shaft profile compared to the original Whiteboard
- 5:00 – The most impressive element of the new WB
- 5:30 – Butt, mid, tip specifications
- 6:00 – WB’s iconic graphics and the Diamana legacy — flowers, surfboard, numbering system
- 8:15 – An abundance of available weights and flexes
- 8:55 – More players going lightweight
Check out more photos and see what GolfWRXers are saying about Mitsubishi WB in the forums.
- LIKE1
- LEGIT0
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
2024 Vokey SM10 wedges: Club Junkie’s full fitting video
Our Resident Club Junkie, Brian Knudson, goes through a wedge fitting with Chris Baingo, Titleist’s Club Fitting Analyst.
Get the full story on new SM10 wedges in our launch piece.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK0
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole5 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole4 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 days ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
geohogan
Feb 6, 2019 at 1:33 pm
A tip from Steve Elkington, is to stick a tee
into the grip end before pushing it over the tape, covered in solvent.
The grip will go on easier and air will escape after tee is pulled.
Steve S
Nov 5, 2017 at 9:18 am
Used both air compressor and solvent methods. Use compressor when I’m in a hurry and want to use the club immediately or when alignment is critical and I want to fiddle with the adjustment. Don’t use it with cord grips since it is potentially dangerous and it’s more difficult since they don’t expand well or evenly.
Acew7iron
Nov 1, 2017 at 8:04 pm
I tell you what…you have someone blow one on compressor style with masking tape and do in in Texas Or Timbuktu then video tape you coming out of your shoes and making it slip,turn or come off.
If you have the money to throw away on grips more power to you but Ill never use the sticky icky any more Compressor install = Better
sk33tr
Nov 1, 2017 at 5:03 pm
Nice refresher! Thanks! Did you get work setup through Golf Works?
Larry
Nov 1, 2017 at 11:46 am
Great video and a good refresher for me. One observation – when removing the grip. I’ve always been told that removing a grip on a GRAPHITE shaft, to never use a traditional blade as it would score & weaken the fibers of the shaft. I’m assuming you used a hook blade…..but you may want to point that out to those that are new to regripping. Thanks again.
Ryan Barath
Oct 31, 2017 at 9:53 pm
Thanks for checking this out guys!
The micro torch is used if the tape is really stuck on the shaft. The key is just to not apply too much heat when doing it.
As far as using air goes, I’ve used it and have a compressor but I MUCH prefer the tape method. A grip is a sunken cost, just like tires on a car. The idea of saving grips is something I’m not a big fan of. I don’t do it with taped up clubs but like I said i cant remove grips with air and use air for sizing once and a while but what about cord grips? they get ruined with air because of the stretching. Ill stick with tape.
alanp
Oct 31, 2017 at 8:15 pm
good article, i have re-gripped tons of clubs but its nice to see a refresher. you brought out the torch but never used it, whats it for?
Acew7iron
Oct 31, 2017 at 2:57 pm
Please…For the love of money do NOT use the old method with double sided sticky icky tape. If you do you will NEVER be able to adjust the grip if you need to and probably destroy the grip if you try to remove it for whatever reason. Grips are expensive in 2017…I recently “sunk” $40 into a SS putter grip but promptly removed it prior to sell the offending putter and replaced it with a $8 special.
The only way to install grips today is by the air compressor method. Its easier,less messy,versatile and cost effective. Look on youtube for instructions…
Your welcome
BIG STU
Oct 31, 2017 at 4:53 pm
Ace you are 100% correct. Air is the only way to go especially if you are like me and find a lot of classic clubs with rotten grips. You can switch them out without any effort at all
James
Oct 31, 2017 at 5:08 pm
Interesting take. I’ll stick to the tape as I shouldn’t need to adjust a grip after I install it correctly.
C
Nov 1, 2017 at 7:31 am
Try using blown on grips when chunking a sand wedge into Texas hardpan. Guarantee that grip will not be straight after that shot. Putter? Fine. But not any other clubs you take full swings with.
C
Nov 1, 2017 at 7:36 am
“The only way to install grips today is by the air compressor method.” Tell that to the pros. And if you argue that we’re not pros, then go ahead and sell all your name brand equipment because apparently having top quality equipment doesn’t matter to amateurs.
Skip
Nov 1, 2017 at 5:10 pm
LOL. Yup, just some guy trying to sound fancy. good luck with the grip staying secure, and don’t gimme the BS about PURE grips. There’s no magic about them that requires air installation. Try to name a Tour Pro that uses Air.
geohogan
Feb 6, 2019 at 3:38 pm
Glue and solvent allows a grip to be pushed over the tape smoothly without having to
stretch the ID of grip oversize to go over the shaft, which is required with compressed air.
Grips stay on by compression, not the adhesive on the tape. The more we stretch the ID, the less compression there will be to hold the grip on.
Aaron
Oct 31, 2017 at 2:47 pm
Where did you get your re-gripping station? The black catch-tray looks wider than many of the other stations I’ve seen online. Thanks!