Equipment
Callaway (finally) launches new Apex MB and X Forged irons
It’s been a long time coming for the release of Callaway’s new Apex Muscleback (MB) irons to the public. It was all the way back in January of this year when we first spotted Apex MB irons. Patrick Reed was testing the irons, and Rory McIlroy — before he joined TaylorMade’s staff — was testing a raw, prototype version of the clubs. Since then, the new Apex MB irons have popped up in the bags of other tour players, most notably Danny Lee (full set) and Phil Mickelson (8-PW).
Finally, Callaway has officially launched the Apex MB irons.
Along with the Apex MB irons, Callaway has also announced that it’s releasing another highly anticipated set of irons that are made for better players: the new X Forged, which we’ve only recently spotted in the bags of Phil Mickelson (3, 5-7) and Sang-Moon Bae (full set).
Callaway’s X Forged irons — first released in 2007, then in 2009, and not again until 2013 — are on a lengthy release rotation, far from the company’s Apex line that gets a new model at least every two years. The X Forged name, possibly due to that few-and-far-between release schedule, has garnered a cult-like appreciation from better players over the years, so this new release of X Forged irons will certainly be significant for those long-time fans.
Find out below what’s new and improved about the Apex MB and the X Forged irons compared to their predecessors, and see what GolfWRX members are saying here.
Callaway Apex MB ($1,299.99)
Callaway’s Apex MB irons are the product of direct feedback from the company’s Tour staffers, according to Luke Williams, Director of Product and Brand Management at Callaway. Forged from 1025 Carbon Steel, the irons are unapologetically made for the best players in the world, and they’re designed with the needs and wishes of Tour players in mind.
These blade irons have the shortest blade lengths, the thinnest soles and the smallest overall heads in the vast line of Callaway irons. They’re designed for maximum workability, for tour-desired turf interaction, and to cut through the thick rough that tour players face week-in and week-out.
With what Williams calls “classic lofts,” the irons are designed for players who know their distances and place more importance on consistent distances than hitting the ball farther. That means the clubs have weaker lofts than any of the other irons in Callaway’s lineup, and the single-piece forgings are not juiced with distance-enhancing technologies.
These irons, which are made with “20V” grooves and “optimized CG (center of gravity),” are for players who strike the center of the club consistently, and who want complete control over spin and trajectory.
Callaway’s Apex MB irons (2-PW, AW), with a Chrome finish, will sell for $1,299.99 starting on November 3 in both right- and left-handed options.
See what GolfWRX members are saying about the irons in our forums.
Callaway X Forged ($1,299.99)
While the new X Forged irons are also designed for Tour players and better amateurs, these irons aren’t “as intimidating” as the Apex Muscleback irons, according to Williams. That’s because, although they’re also single-piece forgings, the blade lengths are slightly longer, the overall head shapes are slightly larger, and they are cavity-back irons made for a bit more forgiveness.
Like the Apex MB irons, the soles of the X Forged irons are built for the turf interaction that’s desired by Tour players, and the head profiles are tour-inspired. The lofts are slightly stronger throughout the set than the Apex MB, but are still weaker than the game-improvement style irons in Callaway’s stable. That means better players will see the ball launch in the “desired window,” according to Williams.
The X Forged irons are “triple net forged,” according to Callaway, and they have progressive CGs with 20V grooves on the face.
Sets of X Forged irons (3-PW) will hit stores on November 3 in both right- and left-handed options, and they will also sell for $1,299.99.
See what GolfWRX members are saying about the irons in our forums.
- LIKE294
- LEGIT23
- WOW29
- LOL11
- IDHT7
- FLOP9
- OB10
- SHANK21
Whats in the Bag
Drew Brees WITB 2024 (April)
View this post on Instagram
Driver: TaylorMade Stealth 2 Plus (10.5 degrees)
Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)
5-wood: TaylorMade Stealth Plus (19 degrees)
Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)
Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)
Putter: Scotty Cameron Select Newport 2 Prototype
Check out more in-hand photos of Drew Brees’ clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Putter Roundup: 2024 Zurich Classic of New Orleans
We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)
MJ Daffue’s Scotty Cameron T-11 Prototype
MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.
Scotty Cameron T-7.5 Prototype
We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.
Alex Fitzpatrick’s Bettinardi SS16 DASS
Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.
Steve Stricker’s Odyssey White Hot No. 2
This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.
Doug Ghim’s Scotty Cameron T-7 Prototype
This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Spotted: Project X Denali hybrid shaft
Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.
Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.
The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.
Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.
Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!
- Check out the rest of our photos from the 2024 Zurich Classic
- Check out in-hand photos of Daniel Berger’s full WITB here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Stephen Finley
Nov 7, 2017 at 11:12 pm
MB: just friggin’ _woof_.
Mat
Nov 7, 2017 at 3:05 pm
Looks like OEMs are starting to settle into 33/37/41/45 for the long haul on 7/8/9/P.
Scott
Oct 23, 2017 at 10:05 pm
Wonder how the X Forged will compare against mizzen jpx 900 forged? I really like the feel I have with my mizzies but I’ve always loved Callaway
Tom Duckworth
Oct 20, 2017 at 6:03 am
The new X Forged clubs look way better than the older ones much more put together on the back side. First set of Callaways I have like the looks of in some time. The blades are OK a blade is a blade I guess. I think I like the MP-18s better but I would think they would play just the same as any other blade iron.
OB
Oct 20, 2017 at 9:54 am
If they “look way better” then they must be better because the look of your WITB is half the game.
AB
Oct 19, 2017 at 10:59 pm
TM came out with their fake ‘forged’ P790s…. and now Cally with their mystery forgings. What’s happening?
jgpl001
Oct 18, 2017 at 5:02 pm
Both look really good
MB’s so like the mp69’s, unreal..
2putttom
Oct 23, 2017 at 1:57 pm
ya ya ya Mizuno has a lock on look a likes.
Kool Aid
Oct 18, 2017 at 12:05 am
No cup face?
finish it
Oct 18, 2017 at 12:04 am
Andrew Tursky is the Assistant Editor at GolfWRX. He played on the Hawaii Pacific University Men’s Golf team while earning a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.
————-
….. and he forgot to ask where the forging is done ….lol
Thomas A
Oct 18, 2017 at 2:11 pm
Lol. Like any company is going to admit where their club heads are made.
OB
Oct 20, 2017 at 9:55 am
Then we must assume the forging was done in Bangladesh for ¢¢¢¢¢¢ ….
AB
Oct 19, 2017 at 10:57 pm
If the clubs are expensive forgings by Endo as has been suggested ,without proof, then Cally should proudly declare it.
If not, and the clubs are forged in Bangladesh for a couple of dollare each then I can understand why they would want to keep it secret.
All the forum gearheads are so proud of their Japanese-made clubs and know all about the forging factory in which they are made.
If Cally keeps it a secret then we must suspect the worst… and they are overcharging for inferior forging with their name on the clubs to exploit the gullible golfers.
2putttom
Oct 23, 2017 at 2:00 pm
Virage Tech in western China
OB
Oct 23, 2017 at 4:44 pm
Proof?
Miz
Oct 17, 2017 at 11:26 pm
Who stole my MP-69 designs
MB
Oct 17, 2017 at 9:27 pm
“Classic” lofts they say, yet the 9 iron is at 42, then the PW at 47, and then an AW at 51????? NOT classic at all. lol
Milo
Oct 17, 2017 at 3:17 pm
Meh, no reason to upgrade my 13s, actually been thinking about getting some Maltbys to try out.
etc.
Oct 17, 2017 at 5:50 pm
But the Maltby forged clubs will not feeeel the same as the Cally MBs or X-Forged…. and then there is the staaaatus. Do you really want to bag Maltbys when they have never won a tournament? After all, you are what you own.
Milo
Oct 17, 2017 at 6:50 pm
I probably would of bought the maltby DBM forged if i knew about them when i purchased by 13s. I like the look of the DBM forged. If i needed status i would get PXG irons, haha.
2putttom
Oct 17, 2017 at 10:25 pm
say’s a guy gettin round town on a skate board
Milo
Oct 17, 2017 at 10:56 pm
I don’t get it lol
finish it
Oct 18, 2017 at 12:02 am
says tricycle tom
2putttom
Oct 20, 2017 at 10:25 pm
I do have a Can am
Luke
Oct 17, 2017 at 2:26 pm
Was confirmed that these are forged at the Endo Forging House. The creme de la creme of forging.
LenG
Oct 17, 2017 at 2:52 pm
Anti-MAGA Callaway clubs. No wonder they are so expensive and useless.
Jim T
Oct 17, 2017 at 9:06 pm
I want Tursky to tell us where the clubs were forged and finished. You say “confirmed” but by who? It’s Tursky’s job to be open and transparent in his reporting on a most important question.
2putttom
Oct 17, 2017 at 10:27 pm
ya stepped in what?
finish it
Oct 18, 2017 at 12:00 am
creme de la creme …. slurp
Jerry
Oct 17, 2017 at 12:32 pm
Bounce on both sets?
Jim T
Oct 17, 2017 at 11:32 am
“Forged from 1025 Carbon Steel” ….. “triple net forged” …. “Forged 18” …..
Okay, Tursky, now tell us where were they manufactured, where were they forged?
No mention here or on the WRX main forum. Seems like nobody knows.
Jerry
Oct 17, 2017 at 12:32 pm
Well, odds are it’s got to be China in terms of manufacturing/forging.
LenG
Oct 17, 2017 at 2:49 pm
No MAGA here!
2putttom
Oct 17, 2017 at 10:35 pm
@ Virage Tech a step ahead, a step above.
etc.
Oct 18, 2017 at 10:34 pm
Zinc die cast clubheads?!!
Dat
Oct 17, 2017 at 11:19 am
Take $300 off those prices and MAYBE they will sell.
etc.
Oct 17, 2017 at 5:52 pm
But that $300 is what Cally will pay Tiger for playing their clubs.
Scott
Oct 17, 2017 at 9:19 am
I’ve always liked Callaway. I’d try the x forged to compare against my miz jpx forged which I’m happy with.
2putttom
Oct 17, 2017 at 10:38 pm
+1
Lance
Oct 18, 2017 at 12:05 pm
2putttom + 1 = 3putttom
2putttom
Oct 18, 2017 at 9:40 pm
thnx
Lance
Oct 20, 2017 at 4:29 pm
yo bin ‘lanced’… wher da sun don shine …. (_*_)
2putttom
Oct 20, 2017 at 10:22 pm
it was a memorable moment
Tim
Oct 17, 2017 at 9:06 am
More Callaway product?!?!??
Ian
Oct 17, 2017 at 8:33 am
Blades have changed little in what the last 30 or 40 years?
So basically zero RnD and they still try sell them for $1300
2putttom
Oct 17, 2017 at 10:37 pm
oh ye of little faith. Google and research and get back to us.
Ian
Oct 18, 2017 at 3:45 am
Lol if you think these will do anything different
LD
Oct 18, 2017 at 9:38 am
Are you seriously stating that there is new “tech” in blades? SMH
Thomas A
Oct 18, 2017 at 2:14 pm
Forging processes have improved to allow for stricter tolerances. So yes, there is “tech” in new blades.
LD
Oct 18, 2017 at 3:20 pm
Forging processes have not improved dramatically in 40+ years. You bought that marketing trash hook, line, and sinker.
2putttom
Oct 18, 2017 at 9:44 pm
” Not only did this 5th forging step improve the density consistency of the raw forgings, which in turn tightened the +/- weight tolerance of the raw forgings, but this additional forging step further reduced the number of internal voids and improved the consistency of the grain structure of the carbon steel. “
etc.
Oct 18, 2017 at 10:14 pm
Tell them about that “soft buttery feel” after the 5th forging step…. which requires more ‘soaking’ in the furnace to keep the forging temperature up….. or do they only do the ‘custom’ forging for the pro’s who endorse the clubs?!!
2putttom
Oct 23, 2017 at 2:06 pm
etc checked in with Mr. Wishon.
Tom Wishon October 20, 2017
The 5th forging step is to hit the head after the flashing is removed one more time with a die that packs the steel more densely and reduces the final flashing to a very small and narrow line of material that is removed very easily from the outer edges of the head. So not only are there fewer and much smaller voids in the grain structure of the steel which makes the raw forgings MUCH more consistent for weight but it also reduces the amount of grinding to clean up the heads to prepare them for machining and plating. That results in more shape consistency of the heads.
LD
Oct 19, 2017 at 6:06 am
They added another die (5th) to the process. Nothing new under the sun. The rest of that statement is marketing gibberish.
2putttom
Oct 19, 2017 at 9:00 pm
etc good question and one to research I’ll ask Mr. Wishon. LD oh wow… do you have some info to share that will support your mood?
Dave
Oct 20, 2017 at 10:01 pm
You know what they could do? Make the chrome and nickel plating thicker so they never get wear spots. That’s about the only thing that could improve the mizunos/endos/etc.
Dj
Oct 17, 2017 at 8:32 am
$1300 for a set of blades? Hard pass
Lance
Oct 20, 2017 at 4:32 pm
But they shave ever so smooth …..lol
ibogeyalot
Oct 17, 2017 at 8:22 am
these companies want people in golf , yet are still charging over 1,000 for clubs! it is insane!
Thomas A
Oct 17, 2017 at 11:01 am
These clubs aren’t exactly aimed at people just being introduced to golf.
Grandpa Gord
Oct 20, 2017 at 4:37 pm
The only people playing golf nowadays is the “baby boomers” born between 1945 and 1966…. because they are retired or near retired and they have all the money and time to play. These expensive clubs are aimed for that market because the next generation, the X-generation, is too poor to play golf. They are squeezing the last $$$$ out of the dwindling golf club market before the Big Collapse takes full effect…. and you better believe it’s happening now.
Carmen Sandiego
Oct 17, 2017 at 8:03 am
I could have sworn they said they were going to release the MB’s in raw finish….Another chrome blade. Hrmph.
Matt Schulze
Oct 17, 2017 at 11:19 pm
There is a raw finish as well.
Sam
Oct 18, 2017 at 12:35 pm
Will they release a raw version? Will that be limited quantities? Where did you hear this? I’m interested in the raw finish set.
etc.
Oct 18, 2017 at 10:16 pm
Trusty rusty irons?