Connect with us

Equipment

Bettinardi launches new Antidote putters in 3 different head shapes

Published

on

In January of 2017, Bettinardi introduced an Antidote prototype on Tour that used weights on top of a blade-style putter to raise the center of gravity (CG) toward the equator of the golf ball for a faster end-over-end roll. At the 2017 WGC-Bridgestone Invitational in August, we spotted a new Antidote prototype; this time, it was a nearly square-mallet head, also with weights on top for the same purpose… to raise CG for a better roll.

Today, Bettinardi announced that it’s officially launching Antidote putters to retail in three different head shapes — 5 models in total.

BettinardiAntidoteGolfWRX

The Antidote putters (Model 1, Model 2 and Model 3), like the prototypes that preceded the official launch, use weights on the top half of the putters to raise CG closer to the equator of the golf ball, which Bettinardi says produces a quicker “end-over-end” rotation of the ball. The positioning of the weights also produce higher MOI (moment of forgiveness, a measure of forgiveness), which help offset off-center hits.

The retail versions of the Antidote putters have a carbon matte black finish, and they come with three weights; aluminum (5 grams), stainless steel (10 grams) and copper (15 grams). They are available today, selling for $550 each.

Check out graphic images of each of the models below.

Model 1

Model 2

Model 2 Center-Shafted

Model 2 Left-Handed

Model 3

Your Reaction?
  • 53
  • LEGIT7
  • WOW4
  • LOL13
  • IDHT0
  • FLOP13
  • OB4
  • SHANK117

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

20 Comments

20 Comments

  1. BN

    Oct 18, 2017 at 12:04 pm

    BRING BACK THE BB32

  2. Larry Cooper

    Oct 13, 2017 at 9:47 am

    I’d rather stay sick with the plague that take this Antidote. I love my BB1 and Betti blade. These are terrible. Please don’t do this again Bob.

    1,2,3 are Bad, Terrible, the worst.

  3. DB

    Oct 12, 2017 at 12:53 pm

    Hey, the Model 3 looks pretty nice. Clean and simple aside from the weights. But the website says it is 1/4 toe hang? Is that right? If you’re going to make a classic shape why not do the classic 1/2 toe hang?

  4. M. Vegas

    Oct 11, 2017 at 6:25 pm

    If these were any uglier….
    They’d be Brian’s mom

  5. MB

    Oct 11, 2017 at 5:40 pm

    I like the Number 2. That giant fly swatter works for me. I wish there was one with a flow neck

  6. BB

    Oct 11, 2017 at 1:23 pm

    If you like the square don’t sleep on the BB55. Been gaming mine for 3 years now and love it. Feel is there too, unlike many larger mallet style putters.

  7. Shawn K

    Oct 11, 2017 at 10:57 am

    Been trying to replace my Bobby Grace V-foil but nothing can touch it. Maybe the square one here as the Betti feel is as close to it as I have felt. We’ll see. Actually, I changed my mind. If it ain’t broke!

  8. cosmos411

    Oct 11, 2017 at 10:05 am

    For $550 I better be able to pick up my ball with the back of the putter!

    • Jeffrey

      Oct 12, 2017 at 2:20 am

      You should be picking it out of the hole.

      • Robert Parsons

        Oct 12, 2017 at 3:28 pm

        Maybe he wants it to come with the suction cup at the end of the grip? Hahaha

        Nobody makes suction cups like we do. Period.

        • Jeffrey

          Oct 13, 2017 at 5:48 am

          Your line up of rollers looks awesome. Is the suction cup an optional extra? LOL.

  9. Jon

    Oct 10, 2017 at 5:22 pm

    It looks like they beat PGX to the punch on this group, minus the excessive amount of screws.

    • alvin

      Oct 10, 2017 at 9:43 pm

      Plenty of ‘screws’ here, particularly for $550…..

  10. Steve I

    Oct 10, 2017 at 4:57 pm

    I’m amazed, amazed, at all the fantastic engineering that has gone into all three models.
    The square mallet headed putter has got to be the final solution to putting, not to mention the fantastic metallurgy and machining that has gone into the head.
    I love the markings on the putter soul and the pride of bagging a Made in USA putter…. and only $550 plus sales tax …. which can be amortized over the next 10 year for ~$60+ per year cost.
    It’s a steal and worth every penny for what must be a guided missile putter.

  11. Tider992010

    Oct 10, 2017 at 4:29 pm

    too much money. too much square. too much everything. Sad thing is, I love Bettinardi’s.

    • etc.

      Oct 10, 2017 at 6:50 pm

      How deep is your love for Bettinardi’s?…. share your feeelings.

  12. Milo

    Oct 10, 2017 at 3:22 pm

    Mmm, that model 2 center shafted putter looks delicious too bad I’m not spending 550 bucks on a putter.

    • etc.

      Oct 10, 2017 at 6:51 pm

      …. and they don’t even provide instructions on how to use this Antidotal putter… not really a bargain, is it?!!

      • Milo

        Oct 10, 2017 at 9:42 pm

        I’ve been gaming an OG Futura since release but switched it up this year, bought a Callaway The Tuttle for 10 bucks and sold the Futura, kinda miss the big spaceship.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Alejandro Tosti WITB 2024 (April)

Published

on

  • Alejandro Tosti what’s in the bag accurate as of the Zurich Classic.

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5

3-wood: TaylorMade Qi10 Tour
Shaft: Project X HZRDUS Black 80 TX

Hybrid: TaylorMade Qi10 Tour Rescue (22 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 6.5 100

Irons: Srixon ZX7 Mk II (4-PW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100

Wedges: Cleveland RTX6 ZipCore Tour Rack (50-10 MID, 54-10 MID, 58-10 MID, 60-06 LOW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100, S400

Putter: Scotty Cameron

Grips: Golf Pride MCC Plus4

Check out more in-hand photos of Alejandro Tosti’s WITB in the forums.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

on

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

on

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending