Connect with us

Equipment

Bob Vokey hand ground 50 “Vokey Signature” 56-degree wedges

Published

on

Before the existence of 60-degree lob wedges, which are now commonplace in the bags of amateurs and professionals alike, golfers relied on 56-degree sand wedges to hit all of the necessary shots around the green. While those days are mostly in the past, Titleist says there are still golfers who prefer to use a single wedge for all shots; bump-and-runs, low spinners, flop shots, bunker shots, and any other shot you may face.

Ahead of the Open Championship, Bob Vokey personally hand ground 50 wedges — they measure 56 degrees in loft and have 12 degrees of bounce — that have heel, toe and leading-edge relief to maximize versatility. That means the soles are designed to work in a variety of setup positions, including square, open or toe down, according to Titleist. There’s also a “pre-worn leading edge” for cleaner turf interaction.

BobVokeySignatureWedge

“It’s the ultimate 56 degree [wedge],” Bob Vokey says. “When I was learning about wedges from some of the best short-game players, they could manipulate the face to execute all the shots they needed. This wedge was inspired by those players, with a sole shape to enable a variety of shots.”

The philosophy of playing a variety of short-game shots with the same club will be especially prevalent this week at The Open Championship. Whereas many American courses lend themselves to high-trajectory shots around the green, Open-style courses often require more lower-trajectory shots that can mitigate the effects of the wind.

The Vokey Signature wedges have a “Diamond LC” finish, and they will sell for $400 each. Custom shafts, grips, ferrules and shaftbands are offered. There are only 50 wedges available in total, and this a U.S.-only release.

Your Reaction?
  • 68
  • LEGIT8
  • WOW7
  • LOL7
  • IDHT0
  • FLOP4
  • OB4
  • SHANK96

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

16 Comments

16 Comments

  1. Donald Trump

    Jul 19, 2017 at 9:56 pm

    I’m waiting for PXG to come out with a $3,000 wedge made of the finest materials……..

  2. Lloyd

    Jul 19, 2017 at 6:22 pm

    Why would anybody pay Titleist $400 for a wedge with Vokey’s name engraved on it. For that price they should engrave my name on the wedge.

  3. Bryan

    Jul 19, 2017 at 3:38 pm

    Honestly, $400 for a 1/50 hand ground wedge by Vokey himself seems like a pretty good deal. OTR already retails for $150

  4. JD

    Jul 19, 2017 at 2:49 pm

    That’s why whenever I buy a new wedge, I drag them on the asphalt on my walk to the car. Gotta pre-wear that leading edge.

  5. Roger in NZ

    Jul 19, 2017 at 2:10 pm

    The comments on only One Wedge for all money shots is realistic.
    If your Titleist 681 set had a 50 degree PW then the next club was
    the Sand Wedge, likely a 56 that you loved…and likely a 588 Tour Action with a Worn Edge !!!

  6. Ben Jones

    Jul 19, 2017 at 12:51 pm

    I have two Cleveland wedges with leading edges that are really “pre-worn” and look great, so are they worth $400 a piece?

  7. Tom54

    Jul 19, 2017 at 12:21 pm

    I can see several hundred dollars for a putter cause with proper care it’ll last forever but spending that kind of money for a limited edition wedge that will wear out quickly makes not much sense

  8. PXG PRO

    Jul 19, 2017 at 11:27 am

    What a cheap, pedestrian item at $400! Only real pros play PXG! GO PXG GO!

  9. Joe

    Jul 19, 2017 at 11:06 am

    the same ole same ole…. people complaining about pricing. Can’t afford it? That’s ok, really. I would say if you really wanted it you could get another job to pay for it… but that would probably be narrow-minded of me…. kind of like complaining about expensive clubs

    • LD

      Jul 19, 2017 at 12:15 pm

      I would say it is narrow-minded stating that everyone complaining about price is unable to afford it.

    • Matt

      Jul 19, 2017 at 1:45 pm

      You really expect to put out a $400 wedge and not get comments on the price. Come on dude. Obviously those of us who realize how short a wedges life span is aren’t going to pay that. There’s a reason they only made 50, they know the pool of buyers for it is infinitesimally small.

    • RG

      Jul 19, 2017 at 11:34 pm

      I know what you mean! These jokers on here just dont get i

      • RG

        Jul 19, 2017 at 11:38 pm

        it! Oh and by the way I have a brand new limited edition jar of dirt for sale for $200. I know what youre thinking, but this is special limited edition dirt! Oh, to expensive? Well go get asecond job you bum!

  10. MikeyB

    Jul 19, 2017 at 10:48 am

    Gee, ONLY $400 a wedge? Pffft. Obviously meant for the lunch pail hauling, beer swilling Muni course hacker. The guy who would have to hide clubs from his wife, and try to convince her she made a mistake balancing the bank account this month.
    Talk to me when you buy Honma ‘Five Star’ clubs that cost $5,400….EACH. Yes a full set of 14 clubs cost $76,000 dollars three years ago!
    Varying degrees of cost can be found on mostly Japanese hand made products such as Miura which fall into the same $300/400/500 a club range. PXG, and now creeping up in price Callaway Epic Pro at $250 a club.
    Just another boutique club for nothing more than the $ the nameplate generates.

  11. ComeyforPresident

    Jul 19, 2017 at 8:11 am

    Someone should buy all 50 and then sell them for 1000 bucks each.

    • Teaj

      Jul 19, 2017 at 9:49 am

      That could work given that it is a US only product you could sell them in different countries. Now if I only had $20,000 laying around.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 74
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending