Connect with us

Equipment

The Precision That Is Epon

Published

on

In 10 years, I’ve played four different sets of irons. Two of those sets I only switched because of the 2010 groove rule. For several years, I played Hogan Apex Plus irons; I still have them in the garage and get them out on occasion. They are positively the best irons I’ve ever hit. I’ve also played the Nike VR Forged Pro Combo and the Titleist 690 CB, which are both tied for a very close second. The fourth set would be the Bridgestone J33 CB irons that were played by Freddy Couples, Matt Kuchar, and Davis Love III in the mid-2000s. I played these irons longer than any others, and the aforementioned Hogan’s just narrowly unseated them. I’m sad that I don’t still have them around.

If you’re accustomed to playing forged irons, it means you’re likely picky about finding the right ones when it’s time to upgrade. You’re searching for the right feel or the right sound or the right head weight. The interesting thing about the irons I mentioned above? They were all forged at the famed Endo Forging House in Japan, though many years apart. If you’re a casual golfer, you may not have heard of Endo… or its house brand, Epon. Prior to researching this piece, I wasn’t all that familiar with them either. Within five minutes of talking on the phone with Dustin Vaughn, however, I learned the forging house had produced all of my favorite irons. Vaughn works for a company called Swing Science, and he’s the Epon distribution manager for all of North America.

“What makes Epon interesting is that when you ask a player what their favorite clubs are, or the clubs they’ve hit that feel the best, they almost alway name a club that was forged at Endo. And with Epon, we can take the process to the next level,” Vaughn said.

I would hear this theme strung throughout our conversation as well as my conversation with Jeff Sheets, who was the lead designer for the Hogan Apex Plus irons back in the day (again, my favorite). The idea is that Epon, because it’s a house brand, can (and does) spend as much time on their product as they need to in order to make it the best they have ever released, and that’s their only restriction.

Over the years, Endo has forged many irons for OEMs. Aside from the aforementioned ones, here are a few others: Mizuno JPX-800 AD and JPX-825, Fourteen TC-606, TC-777, and TC-1000, Nike VR, VR_S, VR Forged and SQ Forged, Titleist 690 MB and VG3. In terms of woods, Epon has forged the Mizuno MP Craft 425 and H4, Nike VR Pro, VR_S, and SQ2 (which is my favorite 3-wood ever, man, I wish I still had it).

When you look at those models, they may not seem like they are the best-selling clubs of all time (though the JPX-800s did well), but they all have a sort of cult following, which is exactly how Epon is viewed, and the company likes it that way.

In the world of iron forging, the process has improved significantly over the course of the last half-century. In the 1970s, a foundry was able to forge a club head to within about 40-60 grams of the desired head weight for the finished product. The extra weight would then have to be ground off by the hands of a highly skilled craftsman, but as with anything, it’s impossible to be perfect every single time. In today’s world, Endo is able to forge an iron head within 10 grams of the desired weight of the finished club head for any company that asks them to forge an iron. That produces a much more consistent product, because there is less room for error on the grinding and polishing part of the process. With its house brand, Epon, the company can take it even further.

With Epon irons, Endo can forge the head to within 6 grams of the desired final head weight. For context, a quarter weighs about 6 grams. Jeff Sheets, the Technical Director for Swing Science and Epon Golf says, “With Epon brand Endo holds nothing back. While they provide premium forgings for major OEMs, every one of those projects operates within a budget. Endo’s Epon products are the epitome of what a forging manufacturer is capable of producing without any limitations.”

Epon AF Tour Irons.

Epon AF Tour Irons

Epon’s latest line of clubs includes the AF-Tour (traditional blade), AF-Tour CB, AF-303, AF-503, and the AF-705. The AF-Tour looks as good as any club you could imagine; it has a thin top-line, little-to-no offset, and the lofts are very traditional (the 7-iron loft is 36 degrees). Their tagline for the AF-Tour is, “If you’ve got to ask if you’re good enough to play this club, then you likely aren’t.” That statement sums up how I felt about it as well. The top line is both something to behold and something to fear.

Yet Epon has also managed to do something I’ve never seen before. In its AF-705, which is Epon’s “super game-improvement” iron, the company has managed to have a very thin top-line as well as less offset, yet still have the irons perform like S-GI clubs. It’s also forged from the same S20C carbon steel as the AF-Tour, which means it’s designed to feel like butter but perform like a hybrid iron. I typically balk at a 7-iron with 29 degrees of loft, but the look of the AF-705 reminds me of my old Hogans.

Epon's AF-705 irons.

Epon’s AF-705 irons

With Epon, just as with other super-premium golf equipment manufacturers like Miura or Fourteen or Vega, the discussion always comes back to price, and maybe rightfully so. A set of Epon irons is going to set you back almost $2,400, which is basically double what other OEMs charge for their “premium” players irons. And the question that always comes up is, “Are these irons really $1,200 better than the Titleists or Mizunos I can buy off the shelf?” That’s entirely up to you.

All I can tell you is what Epon offers, and that is a totally customized fitting experience (you can’t buy Epon off the shelf) for your irons, fairway woods, or whatever Epon product you buy. You will also get a clubhead that has been inspected by hand as it came off the forging line, and you’re getting a club made by the forging house that forged the four best irons I’ve ever held in my hand, all from different brands.

If Endo can create that consistency among OEMs, all with different specs, it seems to me that their house brand can only be something I’d likely fall in love with. At $2,400 per set, I’m just not sure I’m willing to get divorced over it.

Interesting in hitting an Epon? Find an Epon fitter near you. 

Your Reaction?
  • 240
  • LEGIT25
  • WOW16
  • LOL3
  • IDHT2
  • FLOP3
  • OB2
  • SHANK22

Adam Crawford is a writer of many topics but golf has always been at the forefront. An avid player and student of the game, Adam seeks to understand both the analytical side of the game as well as the human aspect - which he finds the most important. You can find his books at his website, chandlercrawford.com, or on Amazon.

16 Comments

16 Comments

  1. bruce n.

    Jul 10, 2017 at 3:48 pm

    I have a set of EPON AF – 503’S that I LOVE. Each head came wrapped in plastic showing the head wt. vs the std. eg : 3 – 258.3 vs 259.5 std 8 – 278.8 vs 280.0 std. I HAVE HAD MANY forged sets and these play very well. I PAID $ 210 per club with kbs tour shafts. The tried the pxg’s before these ; and the epon’s feel softer.They re[placed honma tw 737p’s which replaced I200’S THIS YEAR. I am set now .Try them !!

  2. Ill take the other

    Jun 30, 2017 at 11:28 pm

    Personal 3’s are great (not mentioned)…play well, my set-up was a private builder/fitter very familiar with Epon, ended up with x100 soft stepped black on black played as well as looked. Remember builder actually showing me tolerances of head weights vs. another big name OEM’s premium heads (although i believe this is where “tour issue, and OTR differ slightly…i.e. Tour Issue TaylorMade woods, much better product)…may not mean much, but you do get a higher price with a little more perfection; tighter tolerances, more precise specs. I’ve seen OTR drivers stamped 9.5, measured 10.2. So do believe some companies take more care, but you will pay the “luxury tax”

  3. Ill take the other

    Jun 30, 2017 at 9:57 pm

    while we play this game, a dollar bill is a gram:)

  4. Maz

    Jun 29, 2017 at 8:40 pm

    I had a chance to hit some of their drivers a few months ago during a fitting and they were really good, too!

  5. Marty

    Jun 29, 2017 at 5:33 pm

    FYI, Fairway Golf is an Epon dealer and proud sponsor of GolfWRX.

  6. Zaphod

    Jun 29, 2017 at 1:06 pm

    It’s a shame for the house label that their own irons look like shyyyyte, not very good looking

  7. Neil Cameron

    Jun 29, 2017 at 11:15 am

    maybe he meant raw forgings not the finished heads?

  8. cgasucks

    Jun 29, 2017 at 10:08 am

    I feel like getting a set of Apex Pluses…

  9. juststeve

    Jun 29, 2017 at 9:42 am

    Nice puff piece. Disappointed to find it on the front page at WRX not clearly labeled as advertising. In any event, irons more precise than your swing won’t make you hit the ball better. Work on your swing.

  10. Sam

    Jun 29, 2017 at 9:35 am

    I’m sure he meant .6 of a gram ….. just a typo.

  11. GregC

    Jun 29, 2017 at 9:19 am

    “With Epon irons, Endo can forge the head to within 6 grams of the desired final head weight. For context, a paper clip weighs about 6 grams”

    Not sure what they make paper clips out of in your part of the woods (tungsten maybe?) but a single paper clip does not weigh 6 grams. 12-14 paper clips might get close to 6 grams. Hopefully Endo is a little more precise than the comparison used.

    • Boobsy McKiss

      Jun 29, 2017 at 9:25 am

      ROFL exactly what I was wondering after reading the article.

    • Adam Crawford

      Jun 29, 2017 at 9:48 am

      Greg C, you’re right. It was a poor comparison. We are replacing “paper clip” with “quarter”. A quarter weighs exactly 5.7 grams.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Chesson Hadley WITB 2024 (March)

Published

on

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 70 TX

3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 80 TX

Irons: Titleist T200 (3), Titleist 620 CB (4, 5), Titleist 620 MB (6-PW)
Shafts: Graphite Design Tour AD DI 105 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)

Wedges: Titleist Vokey Design SM10 (52-12F, 56-14F), WedgeWorks (60-K)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball
Grip: Odyssey

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1x

Check out more in-hand photos Chesson Hadley’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Gary Woodland WITB 2024 (March)

Published

on

Driver: Cobra Darkspeed X (8 degrees)
Shaft: Accra TZ5 70 M5

  • The white circle that appears at the top of the face a removable sticker that’s used for launch monitor tracking, and Woodland removes it for competition!

3-wood: Cobra Darkspeed X (14 degrees)
Shaft: Accra TZ5 GW100 Prototype

7-wood: Cobra LTDx LS prototype (20 degrees)
Shaft: Accra TZ5 GW100 Prototype

Irons: Wilson Staff (18 degrees), Cobra King MB (4-PW)
Shafts: KBS Tour C-Taper Limited X

Wedges: Cobra SB (48), Titleist Vokey Design SM10 (52-08F, 56-14F), Cobra King (60)
Shafts: KBS Tour C-Taper Limited X (48 degrees), KBS Tour V-Ten 125

Putter: Scotty Cameron T-5 Proto
Grip: SuperStroke Zenergy Tour 3.0P

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

See more in-hand photos of Gary Woodland’s WITB in the forums.

Your Reaction?
  • 3
  • LEGIT1
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 24
  • LEGIT4
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK0

Continue Reading

WITB

Facebook

Trending