Equipment
TaylorMade 2017 M1 Fairway Woods and Hybrids: What you need to know
With its 2017 M1 line, TaylorMade makes its fairway woods even more adjustable and forgiving, while giving its hybrids a new level adjustability. Here’s what you need to know about both offerings.
M1 Fairway Woods
The M1 fairway woods have a smaller footprint and more compact appearance at address than TaylorMade’s new M2 fairway woods. Most better players will prefer the look of the M1 fairways at address, as well as their center of gravity (CG) location, which is closer to the face to create a lower, more workable trajectory.
Sticking to its M name — which stands for multi-material — TaylorMade’s M1 fairway woods are made from multiple materials, including 450 stainless steel bodies, Ni-Co C300 club faces and thinner, six-layer carbon composite crowns.
The familiar sliding-track system on the M1 fairway woods allows center of gravity (CG) to be adjusted with a 25-gram tungsten weight that tweaks draw and fade bias. Compared to its predecessor, the track has been shifted more rearward, making room for what TaylorMade calls a “Speed Pocket” behind the face. The design change pushed the overall CG of the clubs rearward, helping raise launch angle and forgiveness. The Speed Pocket also plays a role in increasing ball speed on off-center strikes.
While TaylorMade admits that the M1 is not its longest-flying fairway wood (that title belongs to the new M2), the distance gap between the two fairway woods has closed. The M1 has increased ball speeds by an average of 1 mph when compared to the 2016 M1 fairway woods, TaylorMade says.
Like past models, the 2017 M1 fairway woods are adjustable, and their new loft sleeves (made from aluminum) have 12 different loft settings, allowing golfers to adjust loft +/- 2 degrees from printed lofts and adjust lie angle.
To improve turf interaction, the soles of the M1 fairway woods have been recessed in the rear portion, helping reduce drag through impact. This will allow the club to exit quicker from the grass and prevent digging. Our early testing results show that the new sole design can really help on shots from tight lies.
The new M1 fairway woods, like the new M1 drivers, use a new FF2FF manufacturing process that reduces crown weight to lower the CG of the club head and create a slightly higher launch angle. Compared to the M2 fairway woods, the M1 fairway woods will continue to produce slightly more spin, according to the company.
The M1 fairway woods will be available on Jan. 27, 2017 for $299.99 in 15 (3-wood), 17 (3HL), and 19 (5-wood) degrees, each coming stock with Mitsubishi Rayon’s Kuro Kage Silver TiNi fairway wood shafts. There are also 30 shafts available at no upcharge, and stock clubs will be outfitted with Lamkin UTx grips.
M1 Hybrids
Like the M1 fairway woods, the M1 hybrids use a 4-degree aluminum Loft Sleeve to allow golfers to tweak loft, lie and face angle.
TaylorMade’s 2017 M1 hybrids introduce a new weight-track system on sole, which employs a 27-gram tungsten weight to enable golfers to give the clubs more draw and fade bias, if needed.
Like the M1 fairway woods, there is also a Speed Pocket behind the face of the hybrids, helping increase ball speeds on off-center hits. The Speed Pocket is designed to help the face flex more on toe and heel strikes, helping mishits fly more like good shots.
Designed with input from TaylorMade staffers, the top rail and overall size of the hybrids is closer to that of a driving iron than what you’d expect from a typical hybrid. This allows players to better dial-in trajectories, making the clubs more versatile as well.
The M1 rescues clubs come in 2 (17 degrees), 3 (19 degrees), 4 (21 degrees) and 5 (24 degrees) models, and will be available on January 27 for $249 each.
Related
- See more photos of the M1 fairway woods and hybrids and join the discussion here.
- TaylorMade 2017 M2 Fairway Woods and Hybrids: What you need to know
- 12 Important Changes to the 2017 TaylorMade M1 and M2 drivers
- LIKE63
- LEGIT16
- WOW6
- LOL1
- IDHT2
- FLOP1
- OB1
- SHANK18
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE16
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK2
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE12
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK1
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE4
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Photos from the 2024 Arnold Palmer Invitational
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Joaquin Niemann names 3 PGA Tour events he’d love to play each year ‘in a perfect world’
Spotted: Bettinardi irons at the Arnold Palmer Invitational
Collin Morikawa WITB 2024 (April)
Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here. Driver: TaylorMade...
WITB Time Machine: Jordan Spieth’s winning WITB, 2022 RBC Heritage
At the 2022 RBC Heritage Jordan Spieth defeated Patrick Cantlay on the first playoff hole after nearly holing his greenside...
Jason Day WITB 2024 (April)
Jason Day what’s in the bag accurate as of the RBC Heritage. Driver: Ping G430 LST (9 degrees @10) Shaft: TPT...
Ludvig Åberg WITB 2024 (April)
Ludvig Åberg what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)...
-
19th Hole1 week agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks agoAnthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
Mr Poopoo
Dec 8, 2016 at 2:50 am
I see TM still has some of the old Adams Golf engineers still on staff doing the hybrids.
Jack
Dec 9, 2016 at 3:28 am
Yeah that bottom edge looks like the tight lies clubs. Plus they bought them just to get the speed slot patent anyway. I’m sure they are good. Honestly fairway woods are now better than ever, with just minor tweaks every year.
I’m not sure if this years’ clubs are better than the last though. Some of the testing and feedback has been kinda soso.
DJ
Dec 7, 2016 at 6:40 pm
they look like game improvement clubs.
Bob Chipeska
Dec 7, 2016 at 12:13 pm
The only thing I need to know is when they plan on releasing the M1 v3.0, so I can pick one of these up at $150.
Leon
Dec 7, 2016 at 10:33 am
Cheapmade