Equipment
Aldila X-Torsion Black and Green Mamba shafts
Is the next new driver shaft craze on the way from Aldila?
Aldila’s new X-Torsion Black Mamba and X-Torsion Green Mamba shafts have a new design and use a “MAMBA” (Multi-Axial Material Bias Angle) material that’s designed for extremely low torque and spin — lower than any other shaft in the company’s stable, according to John Oldenburg, Vice President of Sales and Marketing at Aldila. And PGA Tour players are already taking notice.
At the 2016 RSM Classic, George McNeil and Charles Howell III used the Black Mamba shafts (designed for very low spin and launch), while Anirbahn Lahiri, Lucas Glover and Tad Ridings used Green Mambas (designed with a slightly softer tip, but still low spin and torque).
For many golfers with fast swing speeds, it’s beneficial to have a golf shaft that reduces twisting through impact, according to Oldenburg, because it allows the shaft to “recover” faster. Less torque and more torsional stability allows stronger golfers to “go at the ball” without worrying about the ball ballooning or spinning too much. Therefore, the goal, especially for Tour players with high swing speeds, is to design a shaft that has very high torsional stability. And Aldila’s new Mamba shafts have the highest torsional stability currently available from the company.
Both the X-Torsion Black Mamba and X-Torsion Green Mamba shafts use what Aldila calls a “flat-weave” construction in its tip section (the bottom part of the shaft), which is where the majority of shaft twisting occurs during a golf swing. The construction method weaves together individual fibers that are positioned in opposing 45-degree angles in an over-under structure that creates a thin, strong and highly consistent woven graphite fabric.
Aldila says its woven technology is superior because it’s used on both the interior and exterior of the shaft, which enhances stability. Most weaves are placed on the interior of the shaft to protect the weaves from abrasion, but Aldila’s unique “lay-up and sanding process” protect the integrity of its flat weave, allowing it to be used on the outside of the shaft as well.
The flat-weave construction is also novel because of it spreads and flattens the graphite fibers used to create the shaft, allowing them to be thinner and thus improving the precision of the weave. Those graphite fibers are also are stronger than typical graphite weave materials. They use intermediate modulus materials that measure 44 MSI, according to Aldila, 33 percent stiffer than 33 MSI fibers typically used. That further enhances stability.
So how does Aldila show off all that technology in a shaft named Mamba? A snake-skin-esque exterior, of course. See what GolfWRX members are saying about the shafts in our forums.
- LIKE106
- LEGIT21
- WOW9
- LOL4
- IDHT5
- FLOP3
- OB2
- SHANK18
View this post on Instagram
Driver: TaylorMade Stealth 2 Plus (10.5 degrees)
Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)
5-wood: TaylorMade Stealth Plus (19 degrees)
Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)
Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)
Putter: Scotty Cameron Select Newport 2 Prototype
Check out more in-hand photos of Drew Brees’ clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)
MJ Daffue’s Scotty Cameron T-11 Prototype
MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.
Scotty Cameron T-7.5 Prototype
We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.
Alex Fitzpatrick’s Bettinardi SS16 DASS
Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.
Steve Stricker’s Odyssey White Hot No. 2
This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.
Doug Ghim’s Scotty Cameron T-7 Prototype
This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.
Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.
The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.
Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.
Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!
- Check out the rest of our photos from the 2024 Zurich Classic
- Check out in-hand photos of Daniel Berger’s full WITB here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Drew Brees WITB 2024 (April)
View this post on Instagram A post shared by GolfWRX (@golfwrx) Driver: TaylorMade Stealth 2 Plus (10.5 degrees)...
Daniel Berger WITB 2024 (April)
Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here. Driver:...
Rasmus Højgaard WITB 2024 (April)
Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic. Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)...
Rory McIlroy WITB 2024 (April)
Rory McIlroy what’s in the bag accurate as of the Zurich Classic. Driver: TaylorMade Qi10 (9 degrees) Shaft: Fujikura Ventus...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Matt K
Dec 15, 2016 at 1:58 pm
Is this the Rogue M-ax rebranded? A lot of the commenters hated the graphics and name for the M-AX. This is undoubtedly better, wonder if the profile/material is the same though.
Mat
Dec 13, 2016 at 5:18 am
X-torsion. Most accurately named shaft in the history of golf equipment. 🙂
Dave R
Dec 12, 2016 at 1:53 pm
One guy peed, someone’s noodle is to soft and so is his butt and he hopeing for a stiff shaft. What type of forem are we on here? The Anti guy is right get some rebar and go play.
Rd
Dec 13, 2016 at 3:16 am
And you’re so excited, you can’t type nor spell
KK
Dec 11, 2016 at 8:23 pm
I peed a little just looking at the pics
Snope
Dec 11, 2016 at 3:11 pm
Just make them feel as solid as the RIP Alpha and Beta, I’ll take 10 each
Teaj
Dec 11, 2016 at 2:12 pm
I wonder if this is going to transition into an iron and hybrid/driving iron shaft line? Has anyone seen the specs for these bad boys? or even just weights?
Matt
Dec 11, 2016 at 12:18 pm
Again I hope that the shaft isn’t soft in the mid section or the butt. There are a lot of low spin shafts that feel like noodles
LaBraeGolfer
Dec 11, 2016 at 12:57 pm
Unfortunately, a shaft has to have a soft point in the bend profile.
The Anti-Smiz
Dec 11, 2016 at 1:33 pm
you guys should just go swing some literal re-bar with your super-fast-in-an-internet-forum swing speeds.
Port
Dec 11, 2016 at 2:27 pm
Love it!
Matt
Dec 12, 2016 at 6:54 pm
Soft is a relative term. I find the Tour AD to be soft, the non-TS Fuji Motore, the 70g version of the White/Blue felt soft to me. I prefer the V2, Protopype, F7M2 Ltd, etc.