Equipment

Mitsubishi Rayon’s new Diamana BF-Series shafts

Published

8 years ago

Sep 14, 2016

In 2005, Mitsubishi Rayon Composites introduced a mid-launching shaft that became one of the most popular shafts in history. Officially it was known as the Diamana S-Series, but golfers around the world came to know it as the “Blue Board.”

Diamana classics kept coming from MRC — the company later popularized a D-Series, or “White Board” shaft that offered a lower trajectory, as well as an M-Series, or “Red Board” shaft that offered a higher trajectory. Eleven years and many generations later, however, the Blue Board, with its mid trajectory and smooth bend profile, continues to be the company’s most popular model.

e3709a4dc9fb5b61e9ef622544678f06

This fall, Mitsubishi Rayon has launched the fourth generation of its most premium Diamana Blue Board profile, which it’s calling the BF-Series. The new shaft is designed to replace the company’s third-generation (B-Series) Diamana Blue Board shafts.

Like the B-Series shafts, the new BF-Series shafts use Dialead Pitch Fiber in the butt section of the shaft, which is stronger than carbon fiber. It’s said to provide stability during the loading and unloading process in the transition of the swing, improving energy transfer.

For stability and strength in its tip section, MRC has introduced a new hybrid prepreg that’s never been used before. The hybrid includes boron and a new material called MR-70, which was first introduced in Mitsubishi Chemical’s aerospace sector. Boron adds strength to the prepreg, and the MR-70 material is 20 percent stronger and 10 percent higher modulus than standard carbon fibers, according to MRC.

bb3b5be173381f824baef9b1fcf5cf53

For a laymen’s visual of what a prepreg is, think of a Fruit Roll-Up (click here for a reminder). Except instead of candy, the flat material is made of carbon fiber, boron, MR-70 and resin. That material is then rolled in specific directions around a mandrel, and baked in a really hot oven to fuse it all together.

The combination of strategically placed materials is designed to make the shaft profile smoother throughout the swing. The result? A slightly lower launch than the B-Series, with more stability, and — if it’s a fit for your swing — a tighter dispersion and more distance.

ad97970229ac53a8b009e7059af5f940

Mitsubishi Rayon’s new BF-Series shafts are available for $400 each in the specifications listed below:

50 (R, S and X-flex)
60 (R, S, X and TX-flex)
70 (S, X and TX-flex)
80 (S, X and TX-flex)

Below are the full specs, as displayed on Mitsubishi Rayon’s website.

Your Reaction?

LIKE64
LEGIT7
WOW3
LOL2
IDHT2
FLOP4
OB4
SHANK6

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

58 mins ago

Apr 25, 2024

GolfWRX Staff

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?

LIKE0
LEGIT0
WOW0
LOL0
IDHT0
FLOP0
OB0
SHANK0

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

2 hours ago

Apr 25, 2024

Brian Knudson

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Check out the rest of our photos from the 2024 Zurich Classic

Your Reaction?

LIKE1
LEGIT0
WOW0
LOL0
IDHT0
FLOP0
OB0
SHANK0

Equipment

Spotted: Project X Denali hybrid shaft

Published

3 hours ago

Apr 25, 2024

Brian Knudson

Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.

Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.

Check out in-hand photos of Daniel Berger’s full WITB here.

The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.

Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.

Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!