Connect with us

Equipment

In-hand pics! Titleist 913 Fairway Woods and Hybrids

Published

on

They’re now in tour players’ hands, and GolfWRX took some in-hand photos of the 913F and 913H.

We captured them in the Titleist tour van and on the range at the 2012 Barclays at Bethpage Black.

Some photos are below.

What do you think?

Click here to see what members are saying in the forums and the more than 80 photos in the forums.

 

 

 

 

 

Your Reaction?
  • 0
  • LEGIT0
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

10 Comments

10 Comments

  1. Ryan

    Oct 25, 2013 at 12:18 am

    Waiting to get paid so i can go and pick me up a 913H to go along with my new 913 D3 i just recently got. Never had i thought of playing with Titleist clubs but iam SO GLAD that i have seen the light. Just recently got the 913 D3 driver and LOVE LOVE LOVE it way better than the Nike Covert Tour i was playing. Now time to get me a Hybrid. Sadly though i cant switch irons I love my Mizzy MP-64s way to much haha

  2. Mark

    Nov 9, 2012 at 2:14 pm

    When does the 913 H come to market?

  3. Jessie

    Oct 15, 2012 at 12:35 pm

    These clubs are looking amazing i cant wait for the 913d2 drops in november currently playing Callaway razr x black 3 wood should i switch to the 913f?

  4. ihatecats18

    Oct 9, 2012 at 9:19 am

    They look they are set standard with an almost closed look to the face. In last year’s model I believe there were only 2 “click” options to open it up. I wonder if it will be like this for this years club.

  5. Eric Lee

    Sep 28, 2012 at 9:54 pm

    Cant wait for these bad boys to be released. Already talking to my guys at fairwaygolfusa.com about what shafts I need to put on them but might have to keep my Graphite Design BB’s from my 910’s. I got a chance to hit these and all I can say is that they feel hotter off the face than the 910’s.

  6. Christian

    Sep 4, 2012 at 6:40 pm

    Aside from the hybrid driver and the “low spin” on the fairway driver, what are the improvements over last years?

  7. Brian Harman

    Aug 31, 2012 at 12:32 pm

    are the adaptors the same? so basically can you reuse premium shafts from the 910f?

  8. tony_stark

    Aug 21, 2012 at 5:27 pm

    these look pretty solid.

  9. Andy

    Aug 21, 2012 at 10:34 am

    Is it a 913H or a H-D on picture #15? It looks so tiny and awesome.

  10. Trey

    Aug 20, 2012 at 7:57 pm

    I like how they added the 913Hd this year. The 913H is definitely going on my Christmas list though.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Garrick Higgo’s winning WITB: 2021 Palmetto Championship

Published

on

Driver: Titleist TSi3 (9 degrees)
Shaft: Fujikura Ventus Blue 6 X

3-wood: Titleist TSi2 (15 degrees)
Shaft: Fujikura Ventus Blue  7 X

Hybrid: Titleist TSi3 (18 degrees)
Shaft: Fujikura Atmos Blue 8 X

Irons: Titleist T100 (4-PW)
Shafts: Project X 6.5

Wedges: Titleist Vokey Design SM8 (50, 56-10S, 60-10S)
Shafts: Project X (52 degrees), True Temper Dynamic Gold Tour Issue (56 and 60 degrees)

Putter: Scotty Cameron Phantom X 5.5

Ball: Titleist Pro V1x (2021)

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Chesson Hadley WITB 2021 (June)

Published

on

Driver: Titleist TSi3 (10.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 70 TX

3-wood: Titleist TS3 (16.5 degrees, B2 Setting)
Shaft: UST Elements Gold 8F5 X

bill-haas-witb-2020

Hybrid: Titleist TSi3 (20 degrees)

Irons: Titleist 620 MB (4-9)
Shaft: True Temper Dynamic Gold AMT White Tour Issue X100 (4-9)

Wedges: Vokey SM8 (48-10F, 52-12F, 56-14F, 60-08M)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball

Grips: Golf Pride MCC

Ball: Titleist Pro V1x

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

SST Pure: A deep dive into the technology

Published

on

Due to the manufacturing process, all golf shafts contain irregularities in straightness, stiffness, and roundness. And depending on how a shaft is aligned, the inconsistencies can adversely affect a shaft’s performance and consistency.

SST PURE was developed as a solution to this problem.

In simplest terms, the SST PURE (stands for it stands for Plane of Uniform REpeatability) process finds a shaft’s most stable orientation to minimizing twisting and off-line bending during the swing. This results in longer, straighter ball flight and more consistent performance in all PUREd shafts. Subjectively, PUREd shafts are often described as feeling “softer” than their non-PUREd counterparts.

For more background on SST PURE and PUREing on tour, we talked with SST founder Dick Weiss, independent rep Scott Garrison, who has the only SST Pure machine on a tour truck, and rep Arnie Cunningham.

Here’s what they had to say.

SST founder Dick Weiss

GolfWRX: Give us a 101-level overview of SST PUREing.

DW: What we do at SST is we analyze the irregularities in a shaft and based on various algorithms, various mathematic formulas, determine which is most asymmetric. Which is the one that’s causing the shaft to bend and twist out of line at impact and also in the first load – the transition between backswing and downswing, there’s a lot of movement in there also. What we do is identify that and mark it so it can be assembled into the club head.

It’s a technological development. It’s come about because we have computers today to do this. We don’t do it by eyeball. The computer doesn’t care who’s going to play it, what level of skill they have, what the material composition is of a shaft, who made it, what kind of ball you’re going to hit. That’s not what we do. What we are saying is we want to analyze a shaft to get it to perform to the best of its ability. You can take a shaft based upon irregularities in it – because shafts are not round or straight.

If you take any shaft and roll it on a table like a pool cue, you’ll see 90% of the time they’ll bounce along because they’re not round. There’s high points and low points, thicker and thinner areas. All we want to do is locate that and say, “Let’s make it work as an asset, let’s make it work as a support for a shaft so they don’t torque out or twist out at impact.”

GolfWRX: Can you give us a brief overview of exactly what goes on in the SST PUREing process?

DW: Sure. In the PUREing process, there’s approximately fifty-six steps you have to take assuming you do what we call a retro-PURE. There’s two ways to PURE. One is if you take a brand new head, a brand new shaft, PURE the shaft and assemble it into a head – that’s a brand new club. The second way would be what we call a retro-PURE. One is we take apart an existing club, keep the shaft, take the grip off, peel the tape off underneath the grip. We use our Weiss-Gibson Ultimate Extractor, we cut the ferrule off. We remove the shaft. We drill out the old epoxy in the head and acetone the head down. We then drill out any old epoxy that may be in the tip of the club. We turn down and clean the outside tip of the club if there’s any epoxy or residue from the epoxy itself where the ferrule may have been. We then go ahead and PURE the shaft. We come back and fit a ferrule, reassemble the club. We use a fast dry epoxy with shafting beads in it.

GolfWRX: Now what would you say to those who don’t believe in the SST PUREing process?

DW: In any technology, people question it which is good. People still don’t think the Earth is round. I think if they are honest with themselves – forget about Dick Weiss and SST as an entity. If they’re honest with themselves and they know anything about clubs whether they make them in their garage or professionally, they have to be able to tell that shafts can not perform the same just randomly or haphazardly assembled. Each shaft has its idiosyncrasies.

So I say for the ones that don’t believe in it, do a test yourself without any type of process. Take a club out, hit it, bring it back in, try to stay off the quadrants, 90 degrees left, 180, another 90, that’s not the way to do it. Move it 30 degrees to the left or right. Put it back in and go hit it. Flip the plane upside down, put it back in, and go hit it.

We’ve started doing a lot of internal testing is because everyone says, “Let us see some independent testing.” We said okay and did it. We took the tour van and five workers with us. We used clubs I hadn’t seen. They came from tour. We didn’t look for asymmetric products. We just took what was there, new shafts, new heads, some of the heads I’ve never seen before. It doesn’t make any difference. We’re happy to subject it to any tests.

Scott E Garrison

“Studies have shown the irregularities in shafts, and that causes offline shots. If you play pool at a bar, you’re going to take the straightest queue.”

GolfWRX: How do you showcase the benefits of SST PUREing when players visit your truck?

SEG: When I have a player in the truck, and I do a quick demonstration and put a shaft in the machine, within two minutes, they’re in…they’re hooked.

All the OEMs, they’re seeing their players want this done, so we’re PUREing up shafts and getting them back to [their trucks] so they can build PUREd clubs for their players.

GolfWRX: What performance examples can you give us where a player PUREd his shafts and saw tremendous improvement?

SEG: It was about seven years ago when I just finished re-gripping Ben Martin’s putter with a SuperStroke grip. As he was leaving, I asked him if he had ever had his clubs PUREd. He said, “No, but I had heard about it and was curious.” I showed him a set I was in the middle of PUREing and he was sold. It was Monday morning, the week of the RBC Heritage and it was pouring. He said to PURE his entire set. That’s what I did Monday afternoon. I ripped his gamers apart and PUREd the shafts and put them back together (a retro-PURE). He was leading the tournament, he shot a career-low round and finished third. He told me later how much better his mis-hits were.

Arnie Cunningham

GolfWRX: What’s the most obvious benefit of PUREing?

AC: It’s about dispersion patterns. Until a person can really dive deep into the numbers—and we’ve done it throughout the years at Golf Laboratories and its proved over and over that the dispersion pattern is better PUREd vs not.

GolfWRX: Are there any misconceptions about PUREing?

AC: Detractors might be looking for some miracle feel, but really, it’s about the dispersion and an improvement on the already good technology in shafts.

GolfWRX: Tell us about the USGA restrictions on PUREing.

AC: You’re stabilizing the golf shaft. You’re putting it in the best playing position possible. If you PURE a shaft, by USGA rules, you can not turn that shaft to allow for a draw or a cut. Just that rule tells me they know it works because they’ve tested and they’ve seen the difference in performance.

Your Reaction?
  • 18
  • LEGIT1
  • WOW1
  • LOL2
  • IDHT2
  • FLOP5
  • OB1
  • SHANK10

Continue Reading

WITB

Facebook

Trending