Connect with us

Equipment

Ping G irons: What you need to know

Published

on

Ping’s G irons (MSRP $110 per club with steel, $125 per club with graphite) will be in stores February 11. They’re available in 4-9, PW, UW (50), SW (54), LW (58). Default color code is yellow. Stock swing weight is DO-D4. 

  • Ping’s Stock Shafts: AWT 2.0 (R, S, X), CFS Graphite (65SR, 70R, 80S)
  • No Upcharge Custom Shafts: True Temper Dynamic Gold (S300, X100), True Temper Project X (5.0, 6.0), True Temper XP 95 (R, S), Nippon N.S. Pro Modus3 105 (S, X)

What you need to know

4c65244b63f20ade949270a2eaa18cbf

  • The G irons use Ping’s COR-Eye technology, which debuted on the company’s super-game-improvement G Max irons that were released in July 2015. The fast-face technology gives the irons higher ball speeds, as well as a higher launch angle because of the bending mechanics of the club face.

6986a92ea241b4f14bddeac361a7b98a

  • Previous G-Series irons were known for their impressive forgiveness – Ping’s G30 irons were the top-rated irons for forgiveness in our 2015 Gear Trials Club Test – but they tended to fly shorter than their competitors. COR-Eye not only improves distance, but improves the overall forgiveness of the irons as well.
  • The G irons have a moment of inertia (MOI), a measure of forgiveness, that is 1.5 percent higher from heel to toe, and 5 percent higher from top to bottom compared to the G30 irons, according to Ping.

874d26836e0b9139e6ca39a4a4ce55c4

  • When comparing 7 irons, the G irons are approximately 5 yards longer than the G30 irons, according to Ping. The company’s testing of the new irons showed a ball speed increase of 1.25 mph, a 0.5-degree higher launch angle and 250 rpm less spin rate.
  • Comparatively, most golfers will see even more distance from the G long irons. The distances the short irons fly will be more similar.

c9298f2742b580c890c75a3dd544a8e8

  • The G irons are cast from 17-4 stainless steel. Their two-stage construction process takes six hours to complete, Ping says. The special heat treatment process used to make the G’s Hyper 17-4 club faces increases strength by 40 percent, compared to the G30 irons.

9da404013bd91f4621b10ecc2b428a2b

  • To make room for the G’s increased face bending at impact, Ping pulled its CTP (custom tuning port) away from the clubface, creating a wide, deep undercut. A thicker badge in the cavity of the irons manages the added vibrations from the irons’ thinner, more flexible faces.
  • The sound of the G irons is a cross between the company’s G Max and G30 irons. “The acoustics tell you there is more speed,” said Marty Jertson, Senior Design Engineer for Ping.
579103d7d32a150ca35fc488b29a52c3

Ping’s G (6 iron) and G30 (right) at address.

  • At address, the G irons appear to have thinner toplines than the G30 irons. While the width of the toplines is essentially the same, they were given a bevel that makes them appear about one-third thinner. The irons also have a slightly different toe shape, with a low toe that has been extended, and a higher peak.
9901b7d5087e820d12b354e39ae2538f

The soles of Ping’s G (left) and G30 irons.

  • Ping made the soles of the G irons slightly wider, but they play effectively thinner because of sole relief added to the back of the sole.

d24d6efdac1aebc9dc407f5a95f1d520

  • Ping’s G irons debut the company’s new AWT 2.0 shafts, made by Nippon, which have an ascending-weight design. In the R flex, shaft weights range from approximately 95 grams (4 iron) to 105 grams (wedges). In the S flex, weights range from 100-110 grams. In the X flex, the weights range from 115-123 grams.

G Iron Specs

Ping_G_iron_specs

Related

Your Reaction?
  • 482
  • LEGIT68
  • WOW62
  • LOL14
  • IDHT8
  • FLOP20
  • OB12
  • SHANK126

18 Comments

18 Comments

  1. Jamz50

    Jun 20, 2018 at 7:08 pm

    I still use the I2 irons on my third set. A seven iron is a seven iron regardless of the number on the sole of the club.

  2. Luke

    Jun 14, 2016 at 2:46 pm

    I agree they look ugly, but if they make the game easier who cares. There ain’t no pictures on the scorecard.

  3. Ruth

    Apr 1, 2016 at 5:51 am

    I just got my fitted G irons today and tried it at the driving range. It added 10 meters to my distance and its so forgiving. Can’t really feel the ball on contact and added more height to the shots with added distance. Nice.

  4. M-Herd4

    Feb 19, 2016 at 3:43 pm

    The back of the cavity looks eerily similar to the Cobra FLY-Z irons with the harmonic insert which were released at the end of 2014.

  5. Adrian Thomson

    Feb 10, 2016 at 2:50 pm

    Playing Ping since 92 & had many sets, last Dec changed to the GMax, big mistake don’t like them, just waiting for the new order of the new G, Irons, not convinced any more that Ping are so great, if these don’t work then a switch to Callaway Irons, like a previous comment already made they are not fair G30 is still a new Iron really.

    • KoKo

      Apr 22, 2016 at 10:27 am

      GMax are max-game improvement irons and not comparable to the G series IMO. There is a huge feel difference having tried them I couldn’t possibly consider them for my own game (currently using G25). I’ll stick with the G25 or maybe move to the G – I tried the “i” as well which I really like but they are lower trajectory.

  6. Birdiedog

    Feb 6, 2016 at 8:00 pm

    Just got fit for a set, took the seven on the range and striped 23 out of 25. That said, I’m older and have an artificial right hip, so my top club head speed was 85. I’m 61and have een playing since I was eight and this is by far the most forgiving golf club I’ve ever swung. For me to swing the club at only85 miles an hour And fly a 7-iron 155 yards with a slight draw is huge. Had no trouble working it left to right, either.
    I’m all in. I ordered mine.

  7. Mark Combs

    Jan 29, 2016 at 9:00 am

    After playing Ping irons for many years, I switched to Callaway and play their Apex irons. I always loved the look of Ping G series irons, I played the G10, G15, G20, and G25. I think these irons are just plain ugly. I don’t like the finish, which is something I always loved about their irons, the dark finish always wore well. Plus, the junk they’ve put on the head of the driver looks ugly as well. I also switched to the new Callaway Big Bertha driver, which has a smokey gun metal finish, which reminds me of something Ping used to make. I feel like Ping has really lost it’s way and is headed in the wrong direction. They should have come out with a G35 that was “better” and waited the appropriate amount of time. It should be noted they brought these out quicker (less than 2 years) to replace the G30, this is unusual for Ping, so obviously the G30s were not moving….Sad, this was a great company, I think Callaway is taking market share from everyone right now

  8. frank freeze

    Jan 22, 2016 at 11:18 am

    If i was a buyer of the G 30 irons i would be quite pissed about the statement that those irons being 5 yards less and less forgiving than the new ones shown above. It seems to me that they should get it right and not keep coming out with a new “set” of clubs each year or every two when they charge you a grand for a new set of clubs. Or they should have a buy back program that allows a golfer to get 80% of the value of the old clubs towards the new set if a new set is released within two years of the old set…….Hmmmm just a thought!!! I do play Ping I-20 and love them but it seems to me that Ping is becoming a taylormade or callaway and just producing new clubs without really creating a new benefit to the average golfer…..Just saying!

  9. Rich

    Jan 14, 2016 at 7:22 am

    “The acoustics tell you there is more speed”. This statement worries me. Callaway and TM have made some awful irons that sound like you’re hitting something so harsh. Hope Ping haven’t gone down the same path.

    • WILSON!!

      Jan 20, 2016 at 6:08 pm

      Are you crazy? Ping irons have always felt harsh. “heat treatment that makes them 40% harder” eh? I didn’t know that was possible.

      • Dave e

        Jan 21, 2016 at 8:41 am

        Got fitted for these at ping gainsborough. Really smooth irons with lots of forgiveness and good distance even on mishits. No harshness either. Needless to say mine are on order ready for the release date.

  10. TMP

    Jan 11, 2016 at 8:25 pm

    Is it Taylorping or Pingmade? Either way, that is one fugly iron

  11. jgpl001

    Jan 11, 2016 at 4:43 pm

    I seem to remember TM being slated for jacking up iron lofts….27 deg 6 iron here, but its Ping, so nobody will complain!!!

    I sure they perform well (as all Ping clubs do), but God they do know how to do ugly

    • xring

      Jan 11, 2016 at 5:30 pm

      Looks like the 2008 TM burner as well. I am a Ping fan and currently play them but find the look recycled. Ditch the baby blue inlays as well.

      • WillyE

        Jan 11, 2016 at 7:05 pm

        Play PINGS and have for years. They are losin me..

  12. Jim

    Jan 11, 2016 at 12:17 pm

    I don’t particularly like the Cor Eye badge but everything seems pretty nice including the new bezel and trimmed top line. Can’t wait to read some full playing reviews too.

  13. Greg V

    Jan 11, 2016 at 11:05 am

    A Nippon AWT shaft – I’m quite interested.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 71
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending