Connect with us

Equipment

Callaway Big Bertha Alpha 816 DBD Driver: What you need to know

Published

on

Callaway’s Big Bertha Alpha 816 Double Black Diamond Driver ($499.99) is available in lofts of 9 and 10.5 degrees for right-handed and left-handed golfers. Stock length is 45.5 inches. Stock swing weight is D4. It’s in stores Sept. 18, 2015.

Stock Shafts: Aldila Rogue I/O 60 (60-gram range), Mitsubishi Rayon Diamana D+ 70 (70-gram range)

What you need to know

48ea61bf9f381198c94be5bfb3e8c41e

f9450827e5bbd99560398b733977768a

Two “Distance Chambers” create four possible CG locations.

  • The Big Bertha Alpha 816 Double Black Diamond, or DBD, has two “Distance Chambers” in the center of the sole — one closer to the heel, one closer to the toe — that allow golfers to vary the position of the driver’s Gravity Core for more draw bias (heel position) or more fade bias (toe position). Because of the Gravity Core’s design (read on), this creates four distinct CG positions: high toe, low toe, high heel, low heel.

c7df51af64a6f2ee6b9ae4415629d8b5

  • The Gravity Core, a stick-shaped object made of carbon fiber and tungsten, has a heavy end and a light end. In the past, Callaway advised golfers who needed a higher-spinning ball flight to position the Gravity Core heavy-side up in the club head, while golfers who required a lower-spinning ball flight were told to position the Gravity Core heavy-side down. This is still true with the new design, but…

“WE’RE SHIFTING THE FOCUS OF HOW WE’RE FITTING THE ALPHA DRIVER TO BE MORE ABOUT BALL SPEED AND LESS ABOUT SPIN RATE,” SAID EVAN GIBBS, CALLAWAY’S MANAGER OF PRODUCT PERFORMANCE.

  • The spin rate difference between the Gravity-Core-up and Gravity-Core-down positions with the Big Bertha Alpha 816 Double Black Diamond driver has been reduced from about 300 rpm in previous versions to 200 rpm because of the Gravity Core’s shorter design.
  • Callaway advises that golfers position the Gravity Core in the heavy-side-up orientation if they tend to contact their drives high on the club face, and in the heavy-side-down orientation if they tend to contact their drives in the middle or the bottom of the club face. Doing so moves the center of gravity (CG) more in line with impact area, which enhances ball speed. Callaway testing showed that 40 percent of golfers create more ball speed with the Gravity Core in the up position.
121c3e40c373d01395b84d63cca7186e

The DBD is all business at address with a matte black crown, no alignment aids and a slightly opened face angle.

“RATHER THAN DEMONSTRATE HOW MUCH WE CAN CHANGE SPIN AS WE DID WITH OUR PAST ALPHA DRIVERS, WE WANTED TO CREATE TWO TRAJECTORIES THAT ARE DESIRABLE TO TOUR PLAYERS,” GIBBS SAID.”BASED ON FEEDBACK AND TESTING, 200 RPM WAS THE SWEET SPOT.”

cab8dc6b1066c140bc23b0017e1b5ef4

The rear weight adds forgiveness, but it’s not meant to be adjusted by consumers.

  • The dual Gravity Core ports were made possible by the elimination of Callaway’s previous adjustable weight ports, which were used on the Big Bertha Alpha (2014) and Big Bertha Alpha 815 (2015) drivers to give golfers the ability to fine tune draw and fade bias. Their removal created the discretionary weight possible for the new design.
  • Like the Great Big Bertha driver, the Big Bertha Alpha 816 DBD has a Forged Composite Crown, a structure that helps move weight lower in the club head. It also uses the same Advanced OptiFit Hosel, which gives golfers a 3-degree range of loft adjustability. So a 9-degree driver can be adjusted to lofts of 8 degrees, 10 degrees and 11 degrees. Each loft can also paired with an individual lie angle of either standard (S) or draw (D), which makes the lie angle more upright.
  • The total weight of the Big Bertha Alpha DBD is 327 grams with Aldila’s Rogue I/O 60 shaft, which uses Aldila’s R.I.P. (Reverse Interlaminar Placement) Technology to give the shaft less torque, increased tip stability and a tighter feel.

More Photos

Related

Your Reaction?
  • 156
  • LEGIT18
  • WOW31
  • LOL13
  • IDHT7
  • FLOP11
  • OB6
  • SHANK77

20 Comments

20 Comments

  1. Kanu

    Jan 29, 2017 at 5:56 am

    Dear Sir,
    I have one Callaway big bertha alpha 816 DBD and 9′
    Kindly teach me, how adjust the lopt from 9′ to 10′ -11′
    Possible advise with picture for reference.
    Thanhs & Regards,
    Kanu.

  2. Colton

    Sep 18, 2015 at 8:32 pm

    Just picked up a 816 DBD in a X- FLEX to replace my X-Hot driver. The increase in distance was easy to see with lower spin and I was getting a tighter dispersion. Love it, I tested the great big bertha and it was nice, but nothing like the 816 DBD. I would play my X-Hot over the Great Big Bertha personally. Easy switch.

  3. Erik

    Aug 29, 2015 at 2:29 am

    All you guys are right but only for the average golfer. Ya if your an average golfer you can’t really tell between this club and a 10 year older model. But when your a good golfer and hit consistently you can tell a huge different. Like it’s now known that about a 3% up swing on the ball give the best result and the golfers who are really good know that and can do it to get the most of of there drives. And sense that’s known now companies are making it so these new drivers can maximize that. Especially for a drivers like this and the other “pro” drivers companies put out.
    You guys are dissing companies like taylormade and callaway for trying new things and saying that it doesn’t work. Well look how much father tour players are hitting the ball now compared to 5 years ago. It’s a huge increase! So the best advice I can give is to invest in a certified instructor who has the correct equipment to get you hitting the ball exactly how it needs to be hit and then you take advantage of the equipment coming out.
    Also you guys really need to be fitted for the driver sense there all crazy adjustable now. You can loose a lot of yards and miss a lot of fairways if you have it tuned wrong or the wrong shaft and shaft length.

    I have hit this driver and I was able to play a couple rounds with it before the release date and it is something special I absolutly loved it. I’m just a broke college student and $500 is crazy money to me. Clubs are becoming way over priced. But the day it becomes $400 this driver will be mine.

    And KK it’s 200 rpms for both.

  4. Joe

    Aug 7, 2015 at 10:16 am

    Zach says that Callaway is telling him Sept 18th release dat. My Callaway rep was in store yesterday and said firmly and without pause that the lineup will be in stores by the end of August. He also repeated that eh new Apex line will make an appearance just after Halloween.

    • Joe

      Aug 7, 2015 at 10:36 pm

      not doubting zach, just curious what the actual scoop is.

    • Steve

      Aug 8, 2015 at 8:15 am

      Why release the driver that time of year? When the golfing season is ending, football starting. Buy the driver and store it for 6 months?

  5. KK

    Aug 5, 2015 at 10:50 pm

    Is it 200 rpms per gravity core or 200 rpms for both? I love the look of the new DBD and the wide, tall face. Not a fan of composite drivers, though.

  6. Corey

    Aug 5, 2015 at 4:17 pm

    Hit this today and it is a very nice upgrade from the 815. More forgiveness with the deeper face and moving the gravity core makes a nice difference. Should be a popular choice for fitters.

    Corey Fields, PGA
    Custom Fitter

  7. Marketing Mirage

    Aug 4, 2015 at 11:05 pm

    All this is is a race of who can market the most BS for people to buy into. I agree this continues to be out of hand. Next thing they’ll resort to is nano tech paint jobs and whatever else they hope sticks to the walls when they throw it on deep. Try a better shaft and swing, until then.

  8. Tom

    Aug 4, 2015 at 8:53 pm

    Time to stop the bs……yea yea yea its whatever

  9. Mo

    Aug 4, 2015 at 8:02 pm

    Yes. Another fantastic driver i can get for about $100 in a year

  10. Leon

    Aug 4, 2015 at 9:51 am

    All I need to know is that if I wait three months, the price will reduce $50; if wait 6 months, $100 off; one year, it gives a $150 discount. And probably one or two new models will come out and say: 400 RPM less spin with 40% more forgiveness. Even my kid will do a good math to add the spin reductions and forgiveness improvements claimed in the past a few year to find out: now everyone is having a negative spin rate driver with double /triple amount of forgiveness.

  11. Dpavs

    Aug 4, 2015 at 9:46 am

    Does anyone else feel all this stuff has just gone too far? The entire illusion of small tweaks equaling significant game improvement just doesn’t hold much water. The bottom line is that if you swing poorly you get a poor result, if you swing well you get a good result. The return of small differences from all this tech is diminishing at best. If you doubt this grab a driver from about 10 years ago and try it against your current gamer. You will probably be surprised that the results are not as different as you might think they would be. It’s time for club manufacturer’s to stop the madness!

    • Christosterone

      Aug 4, 2015 at 10:37 am

      I view golf equipment like cars….is there really a difference between a 65 and 66 mustang? Not really….but premium options like fuel injection eventually trickled down making a 2016 mustang substantially better than a 1966…
      While yes, each year (or decade for that matter) may not see discernible improvements there is no arguing that the technologies which last are richly importing the overall driving experience….pun intended
      That’s all this is….trickle down technology that in the long run will make golf equipment incredibly more efficient and effective although year to year the improvements are almost imperceptible..
      -Christosterone

      • Steve

        Aug 4, 2015 at 5:39 pm

        So buy a new driver every twenty years or so.
        BTW I think a 60’s mustang would be a much better driving experience and much more desired car.

        • Christosterone

          Aug 5, 2015 at 9:58 am

          Sounds about right….personally, I would take a 60s E type jaguar over anything save maybe a 63 split window vette…
          But to your point, yes and no…
          Adjustability and 430-460cc head sizes are the fuel injections of today IMHO…
          Loft, lie and face angle adjustments on drivers were reserved to pros and those who had access to club fitters prior to the str8 fit era….
          We will eventually see adjustability in every club in our bag once the tech allows it…putters are beginning the conversion as we speak…
          Club makers will continue to throw ideas at the wall seeing what sticks…ideas like square heads and mini drivers will come and go….but ideas that work will, like disc brakes, change our golfing lives for the better…
          -Christosterone

          • Steve

            Aug 6, 2015 at 9:10 am

            The problem with your theory is that a 40 year old car and a brand new car will take you from point A to point B. Both will go at above speed limit speeds. Golf drivers have speed limits. Take a 975d and any new driver to a golf course. And you will be surprised both will take you from point a to point b. I think it is more like computers or cell phones. They having these selling points that 99% of people will never use or need

            • Christosterone

              Aug 6, 2015 at 8:27 pm

              Computers are absolutely a perfect analogy…
              I was simply trying to convey the fact that, like computers and cars, most year to year “advancements” are not discernible…but decade advances are more perceptible and tangible…
              As said, I think your PC analogy is spot on!
              -Christosterone

              • Steve

                Aug 7, 2015 at 10:04 am

                Agree, if the hype were true we should all be 100yds longer then 10 years ago.

                • James T

                  May 2, 2018 at 11:07 pm

                  I am.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Daniel Berger WITB 2024 (April)

Published

on

  • Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X

6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X

Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)

Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)

Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0

Grips: Golf Pride Tour Wrap

Ball: Titleist Pro V1

Check out more in-hand photos of Daniel Berger’s clubs in the forums.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans

Published

on

What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.

At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.

Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.

Rory McIlroy

Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC

Alex Fitzpatrick

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC

Daniel Berger

Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap

Rasmus Hojgaard

Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC

Alejandro Tosti

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4

James Nicholas

Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet

Kevin Streelman

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet

Sang-moon Bae

Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet

Russ Cochran

Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align 

MJ Daffue

Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align

Check our more photos from the Zurich Classic here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Rasmus Højgaard WITB 2024 (April)

Published

on

  • Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.

Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX

3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX

Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX

Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130

Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X

Putter: Odyssey Ai One Milled Eight T DB

Grips: Golf Pride MCC

Check out more in-hand photos of Hojgaard in the forums.

 

Your Reaction?
  • 3
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending