Equipment
Callaway Big Bertha Alpha 816 DBD Driver: What you need to know
Callaway’s Big Bertha Alpha 816 Double Black Diamond Driver ($499.99) is available in lofts of 9 and 10.5 degrees for right-handed and left-handed golfers. Stock length is 45.5 inches. Stock swing weight is D4. It’s in stores Sept. 18, 2015.
Stock Shafts: Aldila Rogue I/O 60 (60-gram range), Mitsubishi Rayon Diamana D+ 70 (70-gram range)
What you need to know
- Callaway’s Big Bertha Alpha 816 Double Black Diamond is the lowest-spinning driver in the company’s new driver line. It’s as forgiving as last year’s Big Bertha Alpha 815 driver, and more forgiving than its predecessor, the Big Bertha Alpha 815 Alpha Double Black Diamond driver, offering a 45 percent larger sweet spot and a 30 percent tighter dispersion.
- The Big Bertha Alpha 816 Double Black Diamond, or DBD, has two “Distance Chambers” in the center of the sole — one closer to the heel, one closer to the toe — that allow golfers to vary the position of the driver’s Gravity Core for more draw bias (heel position) or more fade bias (toe position). Because of the Gravity Core’s design (read on), this creates four distinct CG positions: high toe, low toe, high heel, low heel.
- The Gravity Core, a stick-shaped object made of carbon fiber and tungsten, has a heavy end and a light end. In the past, Callaway advised golfers who needed a higher-spinning ball flight to position the Gravity Core heavy-side up in the club head, while golfers who required a lower-spinning ball flight were told to position the Gravity Core heavy-side down. This is still true with the new design, but…
“WE’RE SHIFTING THE FOCUS OF HOW WE’RE FITTING THE ALPHA DRIVER TO BE MORE ABOUT BALL SPEED AND LESS ABOUT SPIN RATE,” SAID EVAN GIBBS, CALLAWAY’S MANAGER OF PRODUCT PERFORMANCE.
- The spin rate difference between the Gravity-Core-up and Gravity-Core-down positions with the Big Bertha Alpha 816 Double Black Diamond driver has been reduced from about 300 rpm in previous versions to 200 rpm because of the Gravity Core’s shorter design.
- Callaway advises that golfers position the Gravity Core in the heavy-side-up orientation if they tend to contact their drives high on the club face, and in the heavy-side-down orientation if they tend to contact their drives in the middle or the bottom of the club face. Doing so moves the center of gravity (CG) more in line with impact area, which enhances ball speed. Callaway testing showed that 40 percent of golfers create more ball speed with the Gravity Core in the up position.
“RATHER THAN DEMONSTRATE HOW MUCH WE CAN CHANGE SPIN AS WE DID WITH OUR PAST ALPHA DRIVERS, WE WANTED TO CREATE TWO TRAJECTORIES THAT ARE DESIRABLE TO TOUR PLAYERS,” GIBBS SAID.”BASED ON FEEDBACK AND TESTING, 200 RPM WAS THE SWEET SPOT.”
- The dual Gravity Core ports were made possible by the elimination of Callaway’s previous adjustable weight ports, which were used on the Big Bertha Alpha (2014) and Big Bertha Alpha 815 (2015) drivers to give golfers the ability to fine tune draw and fade bias. Their removal created the discretionary weight possible for the new design.
- Like the Great Big Bertha driver, the Big Bertha Alpha 816 DBD has a Forged Composite Crown, a structure that helps move weight lower in the club head. It also uses the same Advanced OptiFit Hosel, which gives golfers a 3-degree range of loft adjustability. So a 9-degree driver can be adjusted to lofts of 8 degrees, 10 degrees and 11 degrees. Each loft can also paired with an individual lie angle of either standard (S) or draw (D), which makes the lie angle more upright.
- The total weight of the Big Bertha Alpha DBD is 327 grams with Aldila’s Rogue I/O 60 shaft, which uses Aldila’s R.I.P. (Reverse Interlaminar Placement) Technology to give the shaft less torque, increased tip stability and a tighter feel.
More Photos
Related
- See what GolfWRX Members are saying about the Alpha 816 DBD driver in our forum.
- Callaway’s Great Big Bertha Driver: What you need to know.
- Callaway’s Great Big Bertha and Big Bertha Alpha 816 Fairway Woods.
- Phil Mickelson testing the new 816 DBD driver
- LIKE156
- LEGIT18
- WOW31
- LOL13
- IDHT7
- FLOP11
- OB6
- SHANK77
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE7
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE8
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE2
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks ago
Anthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
Kanu
Jan 29, 2017 at 5:56 am
Dear Sir,
I have one Callaway big bertha alpha 816 DBD and 9′
Kindly teach me, how adjust the lopt from 9′ to 10′ -11′
Possible advise with picture for reference.
Thanhs & Regards,
Kanu.
Colton
Sep 18, 2015 at 8:32 pm
Just picked up a 816 DBD in a X- FLEX to replace my X-Hot driver. The increase in distance was easy to see with lower spin and I was getting a tighter dispersion. Love it, I tested the great big bertha and it was nice, but nothing like the 816 DBD. I would play my X-Hot over the Great Big Bertha personally. Easy switch.
Erik
Aug 29, 2015 at 2:29 am
All you guys are right but only for the average golfer. Ya if your an average golfer you can’t really tell between this club and a 10 year older model. But when your a good golfer and hit consistently you can tell a huge different. Like it’s now known that about a 3% up swing on the ball give the best result and the golfers who are really good know that and can do it to get the most of of there drives. And sense that’s known now companies are making it so these new drivers can maximize that. Especially for a drivers like this and the other “pro” drivers companies put out.
You guys are dissing companies like taylormade and callaway for trying new things and saying that it doesn’t work. Well look how much father tour players are hitting the ball now compared to 5 years ago. It’s a huge increase! So the best advice I can give is to invest in a certified instructor who has the correct equipment to get you hitting the ball exactly how it needs to be hit and then you take advantage of the equipment coming out.
Also you guys really need to be fitted for the driver sense there all crazy adjustable now. You can loose a lot of yards and miss a lot of fairways if you have it tuned wrong or the wrong shaft and shaft length.
I have hit this driver and I was able to play a couple rounds with it before the release date and it is something special I absolutly loved it. I’m just a broke college student and $500 is crazy money to me. Clubs are becoming way over priced. But the day it becomes $400 this driver will be mine.
And KK it’s 200 rpms for both.
Joe
Aug 7, 2015 at 10:16 am
Zach says that Callaway is telling him Sept 18th release dat. My Callaway rep was in store yesterday and said firmly and without pause that the lineup will be in stores by the end of August. He also repeated that eh new Apex line will make an appearance just after Halloween.
Joe
Aug 7, 2015 at 10:36 pm
not doubting zach, just curious what the actual scoop is.
Steve
Aug 8, 2015 at 8:15 am
Why release the driver that time of year? When the golfing season is ending, football starting. Buy the driver and store it for 6 months?
KK
Aug 5, 2015 at 10:50 pm
Is it 200 rpms per gravity core or 200 rpms for both? I love the look of the new DBD and the wide, tall face. Not a fan of composite drivers, though.
Corey
Aug 5, 2015 at 4:17 pm
Hit this today and it is a very nice upgrade from the 815. More forgiveness with the deeper face and moving the gravity core makes a nice difference. Should be a popular choice for fitters.
Corey Fields, PGA
Custom Fitter
Marketing Mirage
Aug 4, 2015 at 11:05 pm
All this is is a race of who can market the most BS for people to buy into. I agree this continues to be out of hand. Next thing they’ll resort to is nano tech paint jobs and whatever else they hope sticks to the walls when they throw it on deep. Try a better shaft and swing, until then.
Tom
Aug 4, 2015 at 8:53 pm
Time to stop the bs……yea yea yea its whatever
Mo
Aug 4, 2015 at 8:02 pm
Yes. Another fantastic driver i can get for about $100 in a year
Leon
Aug 4, 2015 at 9:51 am
All I need to know is that if I wait three months, the price will reduce $50; if wait 6 months, $100 off; one year, it gives a $150 discount. And probably one or two new models will come out and say: 400 RPM less spin with 40% more forgiveness. Even my kid will do a good math to add the spin reductions and forgiveness improvements claimed in the past a few year to find out: now everyone is having a negative spin rate driver with double /triple amount of forgiveness.
Dpavs
Aug 4, 2015 at 9:46 am
Does anyone else feel all this stuff has just gone too far? The entire illusion of small tweaks equaling significant game improvement just doesn’t hold much water. The bottom line is that if you swing poorly you get a poor result, if you swing well you get a good result. The return of small differences from all this tech is diminishing at best. If you doubt this grab a driver from about 10 years ago and try it against your current gamer. You will probably be surprised that the results are not as different as you might think they would be. It’s time for club manufacturer’s to stop the madness!
Christosterone
Aug 4, 2015 at 10:37 am
I view golf equipment like cars….is there really a difference between a 65 and 66 mustang? Not really….but premium options like fuel injection eventually trickled down making a 2016 mustang substantially better than a 1966…
While yes, each year (or decade for that matter) may not see discernible improvements there is no arguing that the technologies which last are richly importing the overall driving experience….pun intended
That’s all this is….trickle down technology that in the long run will make golf equipment incredibly more efficient and effective although year to year the improvements are almost imperceptible..
-Christosterone
Steve
Aug 4, 2015 at 5:39 pm
So buy a new driver every twenty years or so.
BTW I think a 60’s mustang would be a much better driving experience and much more desired car.
Christosterone
Aug 5, 2015 at 9:58 am
Sounds about right….personally, I would take a 60s E type jaguar over anything save maybe a 63 split window vette…
But to your point, yes and no…
Adjustability and 430-460cc head sizes are the fuel injections of today IMHO…
Loft, lie and face angle adjustments on drivers were reserved to pros and those who had access to club fitters prior to the str8 fit era….
We will eventually see adjustability in every club in our bag once the tech allows it…putters are beginning the conversion as we speak…
Club makers will continue to throw ideas at the wall seeing what sticks…ideas like square heads and mini drivers will come and go….but ideas that work will, like disc brakes, change our golfing lives for the better…
-Christosterone
Steve
Aug 6, 2015 at 9:10 am
The problem with your theory is that a 40 year old car and a brand new car will take you from point A to point B. Both will go at above speed limit speeds. Golf drivers have speed limits. Take a 975d and any new driver to a golf course. And you will be surprised both will take you from point a to point b. I think it is more like computers or cell phones. They having these selling points that 99% of people will never use or need
Christosterone
Aug 6, 2015 at 8:27 pm
Computers are absolutely a perfect analogy…
I was simply trying to convey the fact that, like computers and cars, most year to year “advancements” are not discernible…but decade advances are more perceptible and tangible…
As said, I think your PC analogy is spot on!
-Christosterone
Steve
Aug 7, 2015 at 10:04 am
Agree, if the hype were true we should all be 100yds longer then 10 years ago.
James T
May 2, 2018 at 11:07 pm
I am.