Equipment
Odyssey Big T putters aim to make alignment even easier
Odyssey’s Big T putters put a new a twist on the company’s popular Versa alignment system, with four new models that aim to make alignment even easier for golfers.
[quote_box_center]“It’s almost foolproof at how easy it is to see whether you’re square to your target or not,” says Austie Rollinson, Principal Designer for Odyssey.[/quote_box_center]
The foolproof part, according to Rollinson, is the combination of thick perpendicular and parallel lines that intersect to form a large “T” alignment aid on the putter. While T-shaped alignment aids are nothing new in putter design, Odyssey’s decision to display the alignment system so boldly with alternating black and white lines is visually unique.
The idea was inspired by a trip Rollinson and Odyssey’s Global Director of Product Strategy Chris Koske took to Japan, they said. While visiting the Odyssey Tour Department in Japan, they saw an Odyssey Versa V-Line putter that the team had customized for a tour player with a milled perpendicular line that was thicker than the team generally used. Both Koske and Rollinson were intrigued by the look, and the next day Rollinson sketched the first Big T prototype.
The Big T putters are an extension of the company’s new Works line (click here to read about them), and use the same insert as the Works putters, Odyssey’s Fusion RX. It’s designed to feel like the company’s famed White Hot insert, but perform better due to a metal mesh covering that improves friction at impact for an improved roll.
The Big T putters also have black powder-coated shafts that limit glare and have been popular with PGA Tour players in recent years, and are available with SuperStroke grips.
Learn more about of the models in the Big T line below, which will sell for $179 and be in stores June 12.
Big T Blade
- Lengths: 33, 34, 35 inches (RH and LH)
- Nearly Face Balanced
Big T #5
- Lengths: 33, 34, 35 inches (RH only)
- Face Balanced
Big T V-Line
- Lengths: 33, 34, 35 inches (RH and LH)
- Face Balanced
Big T V-Line Center Shaft
- Lengths: 33, 34, 35 inches (RH only)
- Face Balanced
Click here to see what GolfWRX Members are saying about the Big T putters in our forum.
[wrx_retail_links productid=”41″]
- LIKE77
- LEGIT11
- WOW7
- LOL2
- IDHT1
- FLOP1
- OB2
- SHANK10
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE14
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE11
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE3
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks ago
Anthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
LEFTY16
Jun 9, 2015 at 10:20 am
YET AGAIN ONLY HALF OF THE INVENTORY AVAILABLE LEFT HANDED, WHY NOT ALL?????
Bialzibob
Jul 14, 2016 at 12:16 pm
Because there are proportionally less left handers to sell to Why do you think ?
graymulligan
Jun 8, 2015 at 4:21 pm
OMG, return of the detour! That blade is all sorts of funky looking.
Desmond
Jun 8, 2015 at 10:44 am
In my experience, no T line will work for everyone or help aim. Everyone is different and sees differently. I am a centershafted no offset blade a few inches to the left. I cannot aim a heel shafted no offset blade consistently even with lines. But I can aim a mallet with no lines at the target. Before you buy a putter, use something that at least tells you if you can aim it correctly. It may still be too heavy, too long, or the lie angle may be incorrect, but at least you’ll aim it right. Why not, as Rickie Fowler says, get “Custom Fit.”
S
Jun 8, 2015 at 2:40 am
I’m really attracted to that Big T Blade……
bobby
Jun 6, 2015 at 12:21 pm
Looks like some walmart putters to me
Chuck
Jun 5, 2015 at 12:51 pm
So the option for upcharging to a SuperStroke…
Do you get your choice on which SuperStroke to order? Because the $20 upcharge is nearly the retail price of whichever SuperStroke you might want…
I guess I am just not like most golfers; I still look at many of the big OEM’s as component-makers; whatever they have to sell me, chances are >50% that I will change it in some way. Re-grip, reshaft, bend, weight, hotmelt, etc.
tim
Jun 5, 2015 at 11:06 am
I love that Odyssey is constantly coming up with new designs and tweaking some of the old ones. They seem to be “owning” the putter market the last couple years. Every time I visit a big box store seems like everyone flocks to the Odysseys more than anything else.
Michael
Jun 6, 2015 at 8:37 am
New designs? Nothing original here. Look at the seemore putter website and you’ll see similar putters.
tom
Jun 14, 2015 at 10:05 pm
Center shafted v line is new. As is the big t blade.
Scott
Jun 5, 2015 at 10:59 am
I wonder if the center shafted version will come in a counterbalanced version.
Chuck
Jun 5, 2015 at 9:06 am
Great-looking heads. But I am not so sure about a black powder-coated shaft. Are you going to need a shaft cover along with a putter head cover? What is the real reason/need for something other than a chrome shaft?
GMatt
Jun 5, 2015 at 3:24 pm
A powder coat finish is extremely durable
Pete
Jun 6, 2015 at 7:46 am
I prefer the previous version of the Odyssey Works V-Line: same head but silver matte, black “T” with white line, chrome shaft – – they’re just covering all bases on personal preference for finishes.
LorenRobertsFan
Jun 5, 2015 at 8:31 am
Digging the CS. Trying not to give in on a Works #7 plumbers neck