Equipment
Callaway Embraces Adjustability With I-Mix
After the USGA recently announced a rule proposal allowing different forms of adjustability for golf clubs.
Once the announcement spread last year, the race was on among manufacturers to find new ways to incorporate this into their golf clubs. Callaway has just announced their the new I-Mix line of drivers that takes full advantage of adjustability. Inspired by the constant tweaking done to drivers from week to week on tour, the I-Mix will incorporate the FT-5 and FT-i club heads along with over 50 different shaft models that are fully interchangeable with the new I-Mix connector system. In 2008, Callaway will begin selling the FT-5 and FT-i club heads unshafted with the new threaded hosel so golfers can select their ideal head and shaft combinations.
Discuss your opinion on the I-Mix in our forums!
The key to the I-Mix system is the threaded cap screw that is attached to the shaft. The screw is machined from 6-4 titanium which not only saves weight, but ensures a durable, corrosion free system. The club and shaft screw together and are secured with the I-Mix wrench which allows the golfer to have a safe, secure fit; but still provides easy disassembly and reassembly when needed.
Callaway has realized the potential of adjustability with their Opti-Fit weighting system which provides up to 50 grams of discretionary weight which can be moved to provide golfers with either a draw or neutral bias, depending on their ball flight needs. I-Mix pushes that technology one step further now that golfers can easily move between draw and neutral heads, lofts, and shaft combinations to find the perfect launch conditions for the conditions and course they face.
However, club heads are only half of the magic formula to make a great golf club. To complement the club heads, Callaway will be introducing 65 shafts from many different manufacturers including Aldila, Graphite Designs, Fujikura, Mitsubishi Rayon, UST, Matrix, and Grafalloy. Each manufacturer will have a variety of shaft models and weights so golfers can pick the perfect setup to achieve their desired ball flight.
The FT-i will be available in either draw or neutral weighting with 9, 10, and 11 degree lofts. The FT-i Tour will be availble as the Low Center of Gravity model in both draw and neutral with lofts of 9.5 and 10.5 degrees.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Rory McIlroy WITB 2024 (April)
- Rory McIlroy what’s in the bag accurate as of the Zurich Classic.
Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X
Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)
Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour
Ball: 2024 TaylorMade TP5x
Grips: Golf Pride MCC
Check out more in-hand photos of Rory McIlroy’s WITB in the forums.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Spotted: Nate Lashley’s Ping PLD “Wolverine” putter
Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.
This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.
Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.
Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB1
- SHANK1
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole1 day ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 day ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
David Tang
Mar 13, 2008 at 4:48 am
Golfers in ASIA are looking forward for New Fitting System,The only Fitting System that works in ASIA is by PING. If Callaway system is made available…..I love to Custom Fit my Customers with Callaway too!
Kevin
Jan 22, 2008 at 7:27 pm
Cool idea! Looking forward to all of the OEM’s getting on board! Get your SRIKS-ON!
Pingback: Interchangeable shafts/heads...coming to a shop near you! - Golf Forum - Golf Rewound is the Family Friendly Golf Forum and Discussion Group
Michael
Jan 20, 2008 at 1:25 pm
I great idea it will be a lot easier to get the right shaft for our favorite callaway driver, I hope they will have the system tru all clubs. then they vill sell golfclubs!!!
Clay Collins
Jan 19, 2008 at 9:07 pm
From a tweakers standpoint I think this is the best idea I’ve seen since the introduction of the metal woods.