Equipment

Bettinardi releases H2 wedges: Why wedges, Bob?

Published

9 years ago

Nov 26, 2014

Bob Bettinardi’s journey into the wedge market started in 2001 with a single block of steel.

“It was 12 or 13 years ago that I milled a wedge from a solid block of steel, just like we do with our putters,” Bettinardi said. “A guy from one of the wedge companies said ‘I can’t believe someone had the [guts] to do that.'”

Since that time, the renowned putter maker has established a cult-like following for his high-end milled putters, but he has only released wedges in small batches. That changed this month, when Bettinardi unveiled his first line of retail wedges, the H2.

Bettinardi’s earlier wedges, which were produced in batches of 1,000, sold out in a matter of months. But they were expensive to produce because of their fully milled construction and carried a price tag of $400-to-$500 each.

Unlike a putter, which golfers can use for decades, wedges are more disposal. As their grooves dull, so does their ability to produce spin, which is why avid golfers usually need new wedges every six months to three years depending on how much they play.

Was there really a place in the market for a $400+ wedge, Bettinardi asked himself? Probably not, at least not for a full-scale release. He knew wanted to bring Bettinardi wedges to the masses, however, so he worked to get the cost down.

Bettinardi called over to the company’s Japanese facility and told the engineers that he wanted to try making wedges with its forging technology. After nearly two years of tinkering, Bettinardi has produced wedges that look, feel and perform nearly the same as the fully milled models and cost less than half the price. The new H2 wedges, which are forged from 1020 carbon steel, sell for $180 with a Satin Nickel finish and $195 with a Cashmere Bronze finish on Bettinardi’s website.

According to Bettinardi, his goal for the wedges was for them to look, feel and sound better than any wedge golfers have ever played. A lofty goal? Yes, but judging by the success of his putter line it might not be out of reach.

The wedges’ H2 name stands for “Hi-Helix,” which is a machine tool that mills the wedge faces at very high speeds to create a rough face texture that improves spin. While many of the top-name brands have dozens of grind and bounce options, Bettinardi keeps it simple — two finishes and five lofts (52, 54, 56, 58 and 60) for a total of 10 wedge options.

With the H2 wedges, you’re not paying for grind options. You’re paying for wedges of the highest of quality and a buttery soft forged feel.

“If golfers want [a cast wedge] — something more rough around the edges or need more forgiveness — they can buy from one of the cast makers,” Bettinardi says. “If they want a high-performance, precision-forged wedge, or they just like the Bettinardi name, they’ll buy these.”

The wedges have a traditional profile and a C-Grind sole that has mild heel and toe relief. Why the C-grind?

“That’s what I like,” Bettinardi says. “That’s what my son plays, who is a scratch golfer, and that’s the grind that I play. It’s a really versatile grind because the leading edge sits low with the face square, and still sits low to the ground when the face is open.”

Bettinardi’s H2 wedges are available for pre-order and will ship starting Dec. 8. They will be in boutique golf stores in the U.S. starting Jan. 15.

Models include a 52-08, 54-10, 56-12, 58-10 and 60-08 and come stock KBS’ High Rev shaft and Pure Grip’s P2 Wrap grip.

Click here to see what GolfWRX members are saying about Bettinardi’s wedges in the forums.

Your Reaction?

LIKE15
LEGIT1
WOW3
LOL0
IDHT0
FLOP0
OB0
SHANK1

Related Topics:Bettinardi wedges

Up Next

2014 GolfWRX Holiday Gift Guide

Don't Miss

Puma BioDrive Spikeless Golf Shoes

Andrew Tursky

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

31 Comments

nikkyd

Nov 29, 2014 at 3:10 pm

Last i checked, higher rpms on an end mill produces more passes of the cutting head and makes a smoother finish. Hmm…

Reply Report comment
Andy

Nov 28, 2014 at 7:57 pm

Not sure why everyone is so down on Bettinardi and their wedges. If Bob and the team wants to get into the wedge game, let them do it! They make arguably the best putters in golf, so what’s stopping them from expanding their shortgame offering? Yes, they are expensive just like their putters, however I am willing to make an investment into my putter and wedges so I can play the best product and shoot lower scores.

Reply Report comment
Golfwb

Nov 28, 2014 at 4:36 pm

Anybody ready enough to see the upgraded shaft?
I agree the bounce/ grind options are not very good.
I play all stock vokeys and the only one I can flight is the 50*.
Expensive, yes. But you get a top of the line forged head with a shaft you can do anything with. Just my 2 cents.

Reply Report comment
patricknorm

Nov 28, 2014 at 10:07 am

I play 3 custom made Scor wedges (48,52,58)with custom grinds and milled faces. They worked out to about $200.00 each but, I can say with confidence that they along with my putter and driver,were “the” most important clubs in my bag. With each wedge having a double grind and custom loft ,my bunker play has improved immeasurably. What it really comes down to is, confidence from 120 yards in and around the green. If your are truly serious about your game its worth the money. Im not sure I’d spend $400.00 on a wedge though. A putter maybe.

Reply Report comment
- Snowman2134
  
  Nov 28, 2014 at 7:44 pm
  
  Good evening
  
  I am also playing the SCOR wedges (52,56,60) and they’re unbelievable. Best money I’ve spent on equipment in a long time, and the fact that they’re built in Texas doesn’t hurt.
  
  Reply Report comment
Zra

Nov 28, 2014 at 9:42 am

Welp looks nice until the price.

I think Mizuno offers forged wedges at $130 with several loft, lie, grind combinations. Is the Betti $60 better?

Reply Report comment
Snowman

Nov 28, 2014 at 12:31 am

1 grind option and 1 bounce per loft = no sale.

Reply Report comment
Chip

Nov 27, 2014 at 6:13 pm

Bettinardi’s son Sam plays a C grind… So that is all he is going to make? Really Bob? Plus, I live in IL (where Bettinardi is located) and I highly doubt any stores will have demos of these. Do I at least get custom stamping with my $400 dollar purchase?

Reply Report comment
RG

Nov 27, 2014 at 2:49 pm

$180 and only one grind? Can’t get a 46 or 48 to replace a PW? I live and play in Orlando and during the summer months we get ALOT of rain and a “C” grind just won’t cut it. I thought the idea of a wedge was versatility and an ability to customize to fit MY short game and MY playing and course conditions.

Reply Report comment
krschr

Nov 27, 2014 at 1:56 pm

Good looking wedges. A little too rich for my wallet but no doubt Mr. Bettinardi has built a good wedge and will sell them.

I usually think a lot of the WRX community but pretty disappointed in some of the comments. Why is it people can’t refrain from overly negative comments and personal attacks when opinions don’t align? A few on here about his wedges and someone playing the AM tour are unnecessary and disappointing.

Reply Report comment
- RG
  
  Nov 27, 2014 at 2:58 pm
  
  The people who read and post on WRX are pretty savvy when it comes to equipment and when you see negative comments you should heed that as a warning against something that is maybe overpriced, overhyped or both.
  
  Reply Report comment
  - Chris Loskie
    
    Jun 3, 2015 at 2:00 am
    
    Rg. im willing to bet all the people with the negative comments havent even had one of these wedges in their hand.. how could they come up with any kind of conclusions on how they perform?? Mizuno mp10 wedges were the best playing for me then they came out with the t4 and t5’s which I think are shitty.these bettinardi are the the bed balanced nicest feeling easiest to play wedge ive tried.. I got fitted for a little over an hr hitting every wedge novo golf had and these were by far the best..n (for me) maybe not everyone.. I agree tbe limited options are kind of a bnumber but they fit me perfectly. 52 bent to 50.. 56 bent to 53 and 60 to 58… 180$ each kinda sucked but so be it lol
    
    Reply Report comment
josh adkins

Nov 27, 2014 at 1:53 pm

Does anyone else feel that these are not that great and do not offer enough options

Reply Report comment
- RG
  
  Nov 27, 2014 at 4:41 pm
  
  Yup. $180-$195 for a wedge and you can’t get a PW to complete a set and only 1 grind is ridiculous. A “C” grind is pretty versatile, a lot like the Ping Eye 2, but it isn’t the end all be all.
  
  Reply Report comment
Mark

Nov 27, 2014 at 3:11 am

Gorgeous but wedges are made to be thumped out of bunkers and off hardpan lies, a bit like a 4×4. Not sure these will appeal to anyone other than the “my bag cost 5 times more than yours” brigade.

Reply Report comment
- Pat
  
  Nov 27, 2014 at 9:29 am
  
  LOL. Definitely not for poor golfers. Bob always makes top quality products. I have one of his putters and love it. 200 dollar wedges are more common place now. I dropped 150 on my Miura, but it was worth penny. You guys can play your hard, off the rack, clicky Vokey’s and Cleveland wedges. I prefer a higher end wedge that I can get a custom grind and finish.
  
  Reply Report comment
Bruce

Nov 27, 2014 at 2:58 am

I can see people buying their boutique putters because of the “status” but a boutique wedge.

Reply Report comment
J

Nov 27, 2014 at 12:15 am

Over priced. Good looking wedge.

Reply Report comment
simon

Nov 26, 2014 at 11:19 pm

look nice but I am going to stick with my vokeys

Reply Report comment
JohnnyT

Nov 26, 2014 at 8:52 pm

We can only hope that these heartwarming posts are returned in-kind to the people who post them in *their* line of work. “Yeah, that work that *you* do? Nothing special. We’ll save money and get someone else. PASS”.

Reply Report comment
lsf_21

Nov 26, 2014 at 8:09 pm

Save money and buy another forged wedge.

Feel just as good and more bounce/grind options.

Reply Report comment
- JL
  
  Dec 1, 2014 at 3:57 am
  
  Bettinardi and Japanese forgings are better (myth). That’s why the best golfers buy $400 dollar wedges (myth). I think it’s more important to get the best shape for your game, and also keep the wedge fresh. Those worn grooves don’t help (when grass/sand is involved). Woods are about the only clubs you can keep for a long time.
  
  Reply Report comment
James Beatty

Nov 26, 2014 at 7:49 pm

If Bob put this wedge on the market it will be worth it ,I still use he other Wedges he made years ago, and I play a lot of golf in the Amateur Tour with the Golf Channel .

Reply Report comment
- The dude
  
  Nov 26, 2014 at 7:55 pm
  
  BFD
  
  Reply Report comment
- Pat
  
  Nov 27, 2014 at 9:30 am
  
  Good for you. That AM tour is a huge rip off anyways.
  
  Reply Report comment
  - Jim Beatty
    
    Nov 27, 2014 at 4:10 pm
    
    Did you play in it ? Or are you with that E-Tour that you pick up after a triple
    
    Reply Report comment
Rodan

Nov 26, 2014 at 7:04 pm

$200…..pass.

Reply Report comment
TheBrokenTee

Nov 26, 2014 at 6:30 pm

Yeah they’re nice but nothing special. Especially with only one grind. Yeah it’s a nice forged wedge, but a little pricey.

Reply Report comment
Jason

Nov 26, 2014 at 6:01 pm

They need a black finish!

Reply Report comment
- Tyler
  
  Nov 29, 2014 at 10:43 am
  
  Nick has some http://tourstockputters.com/products/bettinardi-h2-black-pvd-wedges
  
  Reply Report comment
sam

Nov 26, 2014 at 5:40 pm

wow

Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

4 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?