Connect with us

Equipment

Callaway launches the Big Bertha V-Series Driver

Published

on

There’s only two real ways for golfers to gain more distance with their driver; they can either increase their ball speed or improve their launch conditions. If they can do both simultaneously, well, then they’re in for some real distance gains.

Callaway’s new Big Bertha V-Series driver is designed to improve the speed portion of the distance equation. It uses a lightweight, aerodynamic club head as well as a lightweight shaft and grip to help golfers generate more distance.

24ae9ff56cc276e7b7039a4ddfda6b5b

“Aerodynamics are the reason bike helmets and airplane wings are designed the way they are,” said Tim Reed, senior vice president of product strategy. “The goal [with the V-Series] was to lower the drag, which in the aerodynamic world is to keep the airflow of the head attached.”

cba243830d357613c577d9fadd7d867d

For that reason, the shape of the V-Series driver is rounder and sleeker than the company’s other Big Bertha drivers, which when combined with the club’s lighter weight helps golfers swing faster and transfer more energy to the ball at impact. That means more ball speed and more distance.

5ddf767e7ed9ae75d5a131add8d26a72

Just how much lighter the club is depends on what loft a golfer chooses.

The higher-lofted V-Series drivers — 10.5 and 13 degrees — are the lightest, with club weights about 290 grams and a 42-gram Mitsubishi Rayon Bassara E Series shaft (L, R, S and X flexes). That gives them a total weight that’s about 23 grams lighter than the company’s Big Bertha driver. The 9-degree model, which should attract better players, comes stock with a slightly heavier head and shaft: Fujikura’s Speeder 565 (R and S flexes). For that reason, it has a swingweight of D2, two points heavier than the other lofts.

c1b5998d39e9ceadf7146f39885ad98f

Like the Big Bertha and Big Bertha Alpha, the V-Series drivers use Callaway’s Forged Composite Crown and Hyper Speed Face designs, which allow those parts of the driver to be made lighter and stronger. Those structures are particularly important for a lightweight driver like the V-Series, because they allow the club heads to be made lighter while maintaining a high moment of inertia (MOI), a measure of a club’s forgiveness, or its retention of ball speed on off center hits.

As for its launch conditions, Reed says that the V-Series driver will not be as low spinning as the company’s Big Bertha Alpha driver, but that it is a fairly low-spinning driver. Golfers can also dial in the launch and spin of the club with its OptiFit adjustable hosel, which offers 8 different loft and lie combinations with a 4-degree loft range. Standard length is 45.5 inches.

The V-Series drivers will be available in stores August 22 and will sell for $399. Pre-orders begin August 8.

Click here to see what GolfWRX members are saying about the Callaway Big Bertha V Series drivers.

Your Reaction?
  • 20
  • LEGIT3
  • WOW1
  • LOL5
  • IDHT3
  • FLOP2
  • OB3
  • SHANK2

40 Comments

40 Comments

  1. john

    Oct 16, 2014 at 4:11 pm

    Another win for the V series last week. Looks worth trying to me.

  2. Kyle Pelkey

    Oct 14, 2014 at 2:01 pm

    I just got fitted by Cool Clubs in Scottsdale Az. Strongly recommend Matt there. Anyways…I tried this one, the Ping G30, the new Titleist 915 D2. I was shocked to find I was WAY more accurate and 15 yards longer with THIS V series Big Bertha. Open your mind and try things….I really wanted to go with the G30 or the Titleist…but it wasn’t even close folks! Yes, it IS all about the shaft…go get fit somewhere (like Cool Clubs) where they can vary the shaft and the clubhead. I wound up with the Callaway BB V series driver, G30 Fairway wood and TM SLDR S hybrid. Already got some awesome G30 irons I can’t say enough good about. TRY THEM ALL! You will likely be surprised. I had read biases about some. But I left with some a MUCH better fit for me (I’m 50 and my driver speed is only about 95mph).

  3. JJ

    Sep 27, 2014 at 7:18 am

    You all might try it before making up your minds. I have this driver and hit it much better than anything I’ve tried this year or last which is considering a lot of new drivers. So many know it alls on forums base opinion without actually trying anything almost as if their convincing others of their opinion matters. Try stuff out then call BS.

  4. Desmond

    Aug 30, 2014 at 9:18 pm

    Mark Crossfield seemed to like it … a lot. See review on youtube

  5. Pingback: Callaway Launches the Big Bertha V Series Driver | Golf Gear Select

  6. Chuck

    Aug 8, 2014 at 2:16 am

    So this whole theory — lighter head, ultralight shaft at almost 46″, low static weight — runs directly counter to what Tom Wishon carefully explained on these same digital pages.

    • Charlie

      Aug 9, 2014 at 12:27 am

      Different theories from different experts

  7. RG

    Aug 7, 2014 at 3:34 pm

    When we have a discussion about why golf participation is down let’s not forget that all the hype around clubs is a major turn-off to beginning players. So much bologna and ridiculous claims by OEMs.they’re shooting themselves in the foot with all the B.S.
    So the message I’m getting is that if I want optimum performance I need to buy new equipment every 3-4 months. No wonder people get turned off and leave the game. So much snake oil.

    • JJ

      Sep 27, 2014 at 7:21 am

      Maybe they’re attempting to reach a more discerning audience. Keep complaining and convincing people to ignore innovation and new attempts at improving our games and see what happens. Ever think it possible that maybe there are some engineers putting some real science into the new clubs?

  8. Martin

    Aug 7, 2014 at 12:06 pm

    V Series will not be successful product it will drop in price $100 in 3-4 months

    • setter02

      Aug 11, 2014 at 11:21 am

      You mean kinda like the Opti-Force that was released right around this time last year…

    • lumpy

      Oct 22, 2014 at 11:51 am

      Just got it and paid $125 less than $399 suggested price. By the way, it’s awesome !!

  9. christian

    Aug 7, 2014 at 4:45 am

    It’s a watered down JDM Legacy Platinum forged driver, been out for a year already. Comes stock with a lightweight and very premium Rombax Platinum shaft.

  10. John

    Aug 6, 2014 at 6:34 pm

    Reading the previous comments was more exciting than this driver. I dont have much to add since you guys have all pretty much hit the nail on the head. Callaway, Taylor Made, Nike among others have become more of a marketing company these days than R & D. It seems there are a few companies; mainly Japanese, with the exception of Ping and Titleist (which is owned by Fila). That consistently produce quality product. Mizuno, Srixon, Titleist, Ping, Cleveland all seem to have the most consistently performing products on a year to year basis. I played the Srixon 701 tours for a long time, and I have seen guys on tour like Hideki and Graeme testing new irons that really peak my interest. I would love to see those in person and set em down behind a ball. I made the switch to the Z-Star and never looked back a few years ago. Best ball I have ever played. If their new clubs are anything like their balls I would love to see them statewide.

  11. MikeB

    Aug 6, 2014 at 4:33 pm

    Enough with the D0 swing weights already!If it was a D5 to D8, I would jump on it in a flash!

  12. Regis

    Aug 6, 2014 at 3:02 pm

    I gamed a composite about 10 years ago. May have even been a Callaway. Problem was it never provided enough feedback. Same with a couple of other Cleveland and Adams lightweight combos. They were awesome to demo or on a launch monitor but after a couple of weeks on the course I was lost, and I am a low SS Player which would seem be the target market for this technology.

  13. Double Mocha Man

    Aug 6, 2014 at 2:44 pm

    Based on most of the comments I think we’re all through with “marketing” innovations. Released every 6 months. Wake us up when there’s something actually innovative, that actually smacks the ball longer and as straight as a rope.

  14. MattK

    Aug 6, 2014 at 2:42 pm

    Can’t we just call it the Biggest Big Bertha 2? Or BBB2 for short?

  15. DK

    Aug 6, 2014 at 12:44 pm

    When can I pre-order my re-released Callaway C4 driver? Here’s the press release from 2002 touting the C4’s lightweight properties…

    “In addition to forgiveness, distance is also a key part of the Big Bertha C4 Driver. The lightweight clubhead makes it beneficial to use a longer shaft in an effort to help golfers of all skill levels generate more clubhead speed. The new Big Bertha C4 Ultralight graphite shaft is 45.5 inches long, weighs just 53 grams, and the tip diameter is a generous 0.400 inch to maintain stability and durability. Five performance-specific flexes are available to suit the needs of individual golfers. Including a proprietary new lightweight grip, a finished Big Bertha C4 Driver weighs approximately 280 grams — roughly 25 grams lighter than other drivers of comparable size.”

    Are they using a fill in the blank marketing template?

  16. DK

    Aug 6, 2014 at 12:29 pm

    Really there’s nothing new on this driver. “New” aerodynamics on a sole design that looks fairly identical to the warbird, just a diff’rent paint job. Need to get rid of all those grooves on the face! Lightweight isn’t innovative anymore, they’re using face tech from the company’s other lines – AT LEAST THEY “KEPT THE AIRFLOW OF THE HEAD ATTACHED!!!” Once again, nothing new. Thanks Tim, that might be the worst quote promoting a driver in the history…

  17. goal!!!

    Aug 6, 2014 at 12:22 pm

    I saw Harris English playing this at the practice rounds this week.

  18. Inthejonzone

    Aug 6, 2014 at 12:16 pm

    Puke…optiforce V2…no thanks Callaway, glad I ditched the Alpha and went back to my old 910…dropped 5 shots since then!!!

  19. richard

    Aug 6, 2014 at 11:35 am

    Yippee! Just what we need, yet another brand spanking new $400 driver! I hope this means I can find a mint alpha for $200 now!

  20. MHendon

    Aug 6, 2014 at 11:00 am

    Blah, Blah, Blah…. Hey but on the bright side my buddy just got the RAZR brand new less than a year old for $199

  21. Courtoni20

    Aug 6, 2014 at 10:53 am

    Sweet! Now I can get last weeks model for next to nothing, Thanks Callaway!

    • dave d

      Aug 6, 2014 at 11:34 am

      $199? We are selling the RAZR for $75, RAZR FIT for $99. RAZR FIT is a great club!

      • MHendon

        Aug 6, 2014 at 11:50 am

        LOL I guess he over paid. I’m not sure which model he bought. Has the green paint on the bottom.

  22. enrique

    Aug 6, 2014 at 10:47 am

    42 and 55g shaft, 46″ and D0? Probably not what I’m looking for in my weekend money game.

  23. jim

    Aug 6, 2014 at 10:33 am

    Looks alot like the old Great Big Bertha, or at least close. Seems the Warbird sole is making a comeback. I really think Callaway and TM release way too many clubs these days, it’s getting really confusing and can’t possibly be good for club sales either.

  24. Desmond

    Aug 6, 2014 at 10:21 am

    That is one deep face … but no turbulators???

    C’mon.

    That sole … brings back memories.

    • Desmond

      Aug 6, 2014 at 12:30 pm

      The driver will undoubtedly work for its market. I’ll give it a whirl in the simulator with a G30…

  25. bradford

    Aug 6, 2014 at 10:14 am

    I tried this approach last season with the Adams Speedline 9088UL. It was stock with a Matrix Radix (s-flex). The club swung a D-0 weight, with a total weight of about 290g.

    The club was an absolute bomber–problem being the extra swing speed made it the wrong shaft for me. I normally swing around 103ish, and this club truly did kick it up to about 108-110. This is a huge gain, I realize–but instead of the high hook I expected, it was a ridiculously high slicing ball–which barely lost any distance, and provided no feedback (and no golf ball). The problem turned out to be that the shaft is so married to a particular swing type, it would produce huge misses in almost unpredictable directions for other swing types. I expect the same here…people will claim it’s longer, but the majority will find it just doesn’t work.

    That Adams sold for $25…not even the price of the lost balls it cost me

    • MHendon

      Aug 6, 2014 at 11:08 am

      Best thing for distance is solid contact. If a driver is longer or lighter than what you’re use to you’ll have a hard time making consistent contact. That’s why after a couple years experimenting with a 45 inch shaft I went back to 44. I’m not only more accurate but actually longer too.

  26. Vandy

    Aug 6, 2014 at 10:14 am

    Re-releasing the optiforce. Bold strategy cotton

  27. tbowles411

    Aug 6, 2014 at 10:07 am

    They’re going back to the Warbird sole. It’s iconic because it worked back in the day. I’m sure it still works, but it remains to be seen of how it works with the head and if it’s geared to help folks not only get the ball in the air, but to stay in the fairway. That’s important.

  28. ND Hickman

    Aug 6, 2014 at 10:01 am

    Pre-orders begin on “Augusta 8” you say?

    • Zak Kozuchowski

      Aug 6, 2014 at 10:52 am

      It appears that subconsciously I’m not ready for this year’s major championship season to be finished.

  29. adan

    Aug 6, 2014 at 9:56 am

    Yawn. Plus, it’ll be on sale for $99 by this time next year. I do like the Mitsubishi Bassara shafts though.

  30. Hellsing

    Aug 6, 2014 at 9:54 am

    Sooo… back to square one?

  31. Martin

    Aug 6, 2014 at 9:49 am

    Doesn’t look like anything new here.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 66
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending