Connect with us

Equipment

Mitsubishi unveils 2015 Diamana shaft lineup

Published

on

Few graphite shaft makers can claim the success of Mitsubishi Rayon’s Diamana shafts, which have been used to win more than 100 events on golf’s major professional tours since 2004. That makes it a big deal when the company tests a new line of Diamana shafts, as it is doing this at the Quicken Loans National.

The most well-known of the company’s Diamana shafts are its original S-Series and D-Series models, known as a “Blue Boards” and “White Boards,” respectively, and they’re used by a staggering amount of the world’s best players. 

Tiger Woods uses the original Blue Board shafts in his driver and fairway woods, while Gary Woodland plays the Diamana S+ Series shafts in his driver and fairway wood. Jordan Spieth, on the other hand, plays an original Blue Board shaft in his driver and a Diamana D+ Series shaft in his fairway wood.

The new models are the second-generation of the company’s Diamana +Plus Series that are played by Woodland and Spieth. They’re called the S+ and D+ Series, and use new technologies that make the shafts a viable option for everyone from the best golfers in the world to the weekend player.

The profiles of the first-generation and second-generation Diamana +Plus series shafts are similar, which means that they should produce close to the same launch and spin characteristics for most golfers. There are material differences between the shafts, however, which will make the second-generation shafts a better fit for many golfers.

IMG_4600
Mitsubishi Rayon’s second-generation Diamana +Plus Series shafts have a matte gray finish, making them a better fit for many of today’s colorful driver, fairway wood and hybrid heads. The first-generation Diamana S+ and D+ shafts had matte blue and black finishes, respectively. 

The second-generation Diamana +Plus shafts expand the company’s Multi-Dimensional Interlay (M.D.I.) technology throughout the length of the shaft, where it was previously only used in the tip. That allows each shaft to be made about 3-to-4 grams lighter without affecting the shaft’s bend profile, said Mark Gunther, Mitsubishi Rayon’s vice president of sales and marketing. Unlike the original Diamana shafts, it also allows Mitsubish to tune the torque of each shaft to a specific flex, giving softer-flex shafts a little more torque and stiffer-flex shafts a little less torque.

What’s also new is that the the second-generation S+ Series shafts are counterbalanced, which means that they have a higher balance point that allows today’s heavier driver, fairway wood and hybrid heads to be played at a standard length or a longer-than-standard length without a drastic affect on swing weight.

The S+ Series shafts are slated to be released in more flexes and more weight options than ever before as well, with an emphasis on going lighter. Golfers will be able to get a 52-gram S+ Series (R and S flexes) for the first time, as well as more standard-weight options: a 62-gram model (R, S, X, TX), a 72-gram model (R, S, X, TX) and an 82-gram model (X, TX).

IMG_4603

TX-flex shafts, which are available in each 62-gram, 72-gram and 82-gram shaft model, use special 46-ton carbon fiber materials that allow the shafts to be stiffer and have less torque than X-Flex shafts.

The D+ Series, which launches lower than the S+ Series, will also be available in a 52-gram model for the first time (R, S and X flexes), as well as a 62-gram model (S, X, TX), 72-gram model (S, X, TX) and 82-gram model (X, TX). It will not be as counterbalanced as the S+ Series shafts, however, because of its target audience. Golfers who tend to be a fit for the D+ Series often want their woods to have either a shorter length, heavier swing weight or both, which generally negates the benefits of a counterbalanced shaft.

Golfers looking for an aggressively counterweighted shaft from Mitsubishi Rayon will be pleased to hear that along with the company’s recently-released Fubuki J shafts, it will release a new Diamana M+ Series shaft, which is inspired by Mitsubishi’s original Diamana M-Series “Red Board” shaft. It’s the highest-launching of the three shafts and is expected to hit the PGA Tour for testing in October. It will be available in a 52-gram model (R, S), a 62-gram model (R, S, X, TX) and 72-gram model (R, S, X, TX).

Like the rest of the line, the M+ Series will be available in limited quantities this fall and will sell for about $300.

Click here to see what GolfWRX Members are saying about the second-generation Diamana +Plus Series shafts in our forum.

Your Reaction?
  • 79
  • LEGIT20
  • WOW10
  • LOL8
  • IDHT7
  • FLOP7
  • OB5
  • SHANK15

13 Comments

13 Comments

  1. brett w

    Nov 18, 2014 at 7:39 pm

    Anyone know what the torque is going to be on the D+ White 70 TX?

  2. DENNIS C. BURNS

    Jul 1, 2014 at 12:35 pm

    WHAT DOES (X5CT) ON THE SHAFT MEAN? DOES IT MAKE A DIFFERENCE AND WHY.

    • John Muir

      Aug 13, 2014 at 7:53 am

      Hi Dennis:
      From their FAQ page:

      The Mitsubishi Rayon logo is comprised of three diamonds. Diamond weight is measured in carats and there are 5 carats in one gram. Therefore these making signify the approximate shaft weight in carats. (e.g. 63 x5ct means 63 x 5 carats = 315 carats = 63 gram

      John Muir

  3. Mizunopure

    Jun 28, 2014 at 2:22 am

    I’ll take an O.G Blueboard for 90. Thank you!

  4. billm311

    Jun 26, 2014 at 9:05 am

    I wish Mitsubishi would release lighter flexes in the heavier weights. My swing fits the whiteboard profile perfectly, but I usually can’t get maximum benefit from Diamana’s when it comes to weight v flex. Can I get a 60 Regular or 70 regular please?

    Killing me.

  5. Chuck

    Jun 26, 2014 at 7:43 am

    With all of the interest in heavier-weight shafts (including but not limited to Tiger Woods’ earlier move to a 103g Diamana), I sort of expected that if Mitsubishi was going to do anything new, that they would include such choices. Too bad that that appears not to be the case.

  6. West

    Jun 24, 2014 at 5:09 pm

    The matte silver finish does look nice. But how do they stack up against the B and W series?

    • Joe Golfer

      Jun 26, 2014 at 2:47 am

      I like that chrome ion plated finish that is just coming out. Not sure which version of the Diamana shafts it is though.
      If you read the FAQ’s (frequently asked questions) on the Mitsubishi Rayon website, it mentions that this particular finish has already been around in their Japanese market but hasn’t made it to America yet.

      @West asked how this article’s shafts stack up against the B and W series.
      I honestly can’t say, but the Mitsubishi Rayon website does discuss some of that stuff, so one can go there http://www.mitsubishirayongolf.com/product.php?cmd=thirddia&lang=en
      and look up the info and hope you can decipher all their lingo.
      Under the “products” section they list each of the types of shafts.
      Once you get to the shaft, you can read their description of what makes them different, and they provide their specs as well as an EI chart, which is their shaft bend profile from butt to tip.
      Hope that helps.

      • west

        Jun 27, 2014 at 4:55 pm

        Thanks for your help, but the site doesn’t actually list these products.

        But after rereading, it looks like these 2nd gen shafts are really just counter balanced versions of the 1st gen shafts for the heavier, lower CG heads, and also with that MDI weave through out the shaft. Wonder how that will affect the “feel” of the shaft???

  7. Pingback: Mitsubishi unveils 2015 Diamana shaft lineup | Spacetimeandi.com

  8. JJ

    Jun 23, 2014 at 5:52 pm

    Ummmmm Delish!!!!

  9. Steve Barry

    Jun 23, 2014 at 5:28 pm

    I like the throwback look to the OG Blueboards and Whiteboards.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Chesson Hadley WITB 2024 (March)

Published

on

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 70 TX

3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 80 TX

Irons: Titleist T200 (3), Titleist 620 CB (4, 5), Titleist 620 MB (6-PW)
Shafts: Graphite Design Tour AD DI 105 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)

Wedges: Titleist Vokey Design SM10 (52-12F, 56-14F), WedgeWorks (60-K)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball
Grip: Odyssey

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1x

Check out more in-hand photos Chesson Hadley’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Gary Woodland WITB 2024 (March)

Published

on

Driver: Cobra Darkspeed X (8 degrees)
Shaft: Accra TZ5 70 M5

  • The white circle that appears at the top of the face a removable sticker that’s used for launch monitor tracking, and Woodland removes it for competition!

3-wood: Cobra Darkspeed X (14 degrees)
Shaft: Accra TZ5 GW100 Prototype

7-wood: Cobra LTDx LS prototype (20 degrees)
Shaft: Accra TZ5 GW100 Prototype

Irons: Wilson Staff (18 degrees), Cobra King MB (4-PW)
Shafts: KBS Tour C-Taper Limited X

Wedges: Cobra SB (48), Titleist Vokey Design SM10 (52-08F, 56-14F), Cobra King (60)
Shafts: KBS Tour C-Taper Limited X (48 degrees), KBS Tour V-Ten 125

Putter: Scotty Cameron T-5 Proto
Grip: SuperStroke Zenergy Tour 3.0P

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

See more in-hand photos of Gary Woodland’s WITB in the forums.

Your Reaction?
  • 0
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 19
  • LEGIT4
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending