Connect with us

Equipment

TaylorMade launches SLDR Mini

Published

on

TaylorMade is betting that bigger is better with the SLDR MiniDriver, its newest metalwood that blends the forgiveness of a driver with the versatility of a fairway woods.

“The general premise is based on how our tour players are using their 3 woods,” said Brian Bazzel, TaylorMade’s product creation manager. “They’re hitting it off the tee way more than they’re hitting it off the ground.”

The SLDR Mini hits shelves on May 2, and will be available in three lofts: 12 degrees, 14 degrees and 16 degrees. It measures a beefy 260cc, about 100cc larger than the company’s SLDR and JetSpeed fairway woods, which gives the club a substantially larger clubface area. The larger size and 43.5-inch stock shaft length, which is 2 inches shorter than the company’s SLDR driver, makes it an attractive option for golfer who either:

  1. Hit their 3 woods primarily off the tee.
  2. Struggle with the accuracy of their driver.

bab2be3c754ab5428f363a6e9267274b

Above: The SLDR Mini (left) and SLDR 460 driver. 

Like TaylorMade’s SLDR drivers, the SLDR Mini has a low, forward CG that TaylorMade says contributes to a higher launch, lower spin and more ball speed. Its construction is more similar to the company’s SLDR fairway woods, however, with a steel frame and face and the latest version of TaylorMade’s Speed Pocket, a polymer-filled handle-bar shaped slot in the front portion of the club’s sole that also helps shots launch higher with less spin and contributes to faster ball speeds across the clubface.

0562a5f9767a5e307cb0f1fa6c469a52

Above: The TaylorMade SLDR Mini (left, 260cc) is considerably larger than Callaway’s X2 Hot 2Deep (right, 210cc). It’s also much larger than Ping’s new Rapture fairway wood (219cc), which like the Mini and 2Deep are also designed for golfers who use their 3 woods more from the tee than from the ground. 

TaylorMade’s Staff Member Troy Matteson made headlines at the Valero Texas Open when he decided to take his SLDR driver and 3 wood out of the bag for two SLDR Minis: a 10.5-degree version that he used off the tee and a 12-degree version that he used as his 3 wood. Matteson has been the exception, however, as most tour players who have tested the SLDR Mini have opted for one model with a loft between 12 and 14 degrees.

9e1af676882b647309dfcf0ce774ece0

TaylorMade engineers took care in the design of the SLDR Mini to ensure that it was playable both off the tee and from the fairway by adding increased curvature, or radius, to the sole of the club. That slightly decreased the clubface size, but allows the SLDR Mini to slide more easily through the turf. From the ground, Bazzel says the club’s taller, or deeper face will allow it to spin more, which will help golfers who want the SLDR Mini to land softly on the green. Off the tee, Bazzel recommends teeing the SLDR Mini with the ball about halfway above the club’s crown.

The SLDR Mini will sell for $279 with the company’s Speeder 57 shaft, which has a 0.350-inch diameter and is available in M, R, S and X flexes. A SLDR Mini TP ($379) will also be available. It comes with Fujikura’s Motore Speeder 7.3 Tour Spec shaft in R, S and X flexes and has a 0.335-inch diameter.

Click here to see what GolfWRX Members are saying about the SLDR Mini in our forum.

Click here to see what GolfWRX Members are saying about the SLDR Mini in our forum.

Your Reaction?
  • 9
  • LEGIT2
  • WOW7
  • LOL1
  • IDHT0
  • FLOP2
  • OB0
  • SHANK0

38 Comments

38 Comments

  1. cmyktaylor

    Jun 26, 2015 at 9:23 am

    Just bought a used 14 degree Mini with a x-stiff Diamana blue shaft. I had been using a stock Taylormade Burner Superfast 1.0 3 wood (15 degree) with their stock stiff shaft to drive, but was looking for a little extra distance and a little extra control.

    Found the perfect solution! The Mini is only one degree less loft, but with the stiffer and lower profile shaft, this doesn’t fly too high. The shaft is also the same length as the 3 wood, so it’s easy to control. I’ve never been able to keep up with my brothers-in-law when it comes to distance (285-300), but I don’t need to with this. I’d rather be 260-270 in the fairway (68% per golfshot) than in the woods.

    I’m also able to hit the Mini driver off the deck, so my son just inherited my old Burner Superfast driver and 3 wood!

  2. Fred

    Aug 22, 2014 at 3:25 pm

    Hey, I have one of these…it’s called a 975d!

  3. Pingback: TaylorMade Driver Review - JetSpeed to Mini - The Golf Shop Online Blog - The Golf Shop Online Blog

  4. Lee H

    Apr 17, 2014 at 5:42 pm

    I hit the mini SLDR today (14 degree model)…Great feel and easy to control for this 12-14 handicap. I am actually interested in hitting the 12 degree when it comes out, to replace my driver. My carry was about 10 yds further than my R1 with a similar launch. Only thing I did not like was the light 57 gram speeder shaft, which is what the standard SLDR uses as well. I think they could’ve offered it stock in 67 and then heavier in TP model.
    Overall, a solid club. I love my 14.5 original RBZ Tour 3 wood. But I could see carry the 12 SLDR along with it.

    • steven hansen

      Sep 2, 2014 at 2:18 pm

      Well I bought the 12 regular shaft and cant hit it. Super clunky, I have a RBZ 17 hl and hit the pooooooh out of it, back to Dicks the 12 SLDR Mini goes

  5. luke keefner

    Apr 8, 2014 at 12:54 pm

    wait for next spring and
    buy it for $125

    • pk20152

      Apr 9, 2014 at 7:09 am

      Next spring? you mean next month… they’ll have it’s replacement out next week. Then it’s replacement’s replacement the week after….

  6. Gary

    Apr 8, 2014 at 11:17 am

    I have to assume that since the length is 43 1/2″ that the head weight is the same as a #3 wood (210 grams). They have copied the same concept as Hireko Golf (component company) has had for the past 2 years in making a shorter length, heavier head weight, extra loft driver.

  7. Yam

    Apr 8, 2014 at 2:27 am

    Why is it not adjustable???? That makes no sense whatever! What if I wanted to quickly try a different 3-wood shaft?

    • Brick

      Apr 8, 2014 at 12:53 pm

      It makes total sense….the adjustable version will be released in about 3 months when TMAG hits their forecasted benchmark in sales with this version…pretty smart business wise.

  8. Mark

    Apr 7, 2014 at 9:36 pm

    Currently, there is no pre-order option for an x-stiff on the non-tp version. Hope they change this once the club is out. Would rather pay $280 than $380 for a large 3 wood.

  9. Jim

    Apr 7, 2014 at 4:56 pm

    It does look good but probably not going go sell very many. I prefer the look of the ping rapture to all of the said mini drivers. But neither one is for me. Ill stick to my g25 driver 3 wood and 3 hybrid

  10. steve

    Apr 7, 2014 at 3:16 pm

    I love sliders

    • steve

      Apr 7, 2014 at 3:23 pm

      260CC is the new driver size? Cool I am going to the garage and getting my 975d, 260cc also. I bet this thing can’t compare to my old 975d.

      • Larry

        Apr 7, 2014 at 10:04 pm

        I have a 15 year old Callaway Hawkeye driver that works fine as a “3” wood replacement…these club companines are really streching to make money to pay thier pros….

      • Lucas

        Apr 8, 2014 at 7:36 am

        Steve your an idiot.

        • Elliott

          Apr 10, 2014 at 7:42 pm

          Lucas, you should realllllllly work on your use of your and you’re when calling someone an idiot.

      • ya

        Apr 8, 2014 at 6:35 pm

        Don’t count on it…

  11. David McCuiston

    Apr 7, 2014 at 3:14 pm

    Appears to be a big fairway wood that is hard to hit off the deck, available in 12 degree loft. Already done!

    Even the pro was using a 10.5 degree that isn’t available.

    Make the 10.5 or 9.5 degree fairway sized driver that is primarily for off the deck.

  12. Jason

    Apr 7, 2014 at 11:47 am

    I don’t see this being a great seller.

  13. Gerard

    Apr 7, 2014 at 10:43 am

    This is already available in Australia, I’ve hit it a few times and it does fly pretty damn well. Noticeably further than my 3 wood off the tee and easy to get up off the deck.

    Not the biggest fan of the colour scheme though, leaves a bit to be desired I reckon.

    • David

      Apr 7, 2014 at 2:58 pm

      Can i ask what loft did you try? 14 or 12 degree?

      • Gerard

        Apr 8, 2014 at 4:53 am

        It was the 12 degree, really nice club. But it feels like more of a beefy 3 wood than a small driver.

        • David

          Apr 8, 2014 at 11:19 am

          Cool – thanks I’m going to order one today! Appreciate the feedback

  14. Ben

    Apr 7, 2014 at 10:09 am

    looks like a B to try and take off the deck

  15. J

    Apr 7, 2014 at 10:08 am

    3 – 400.00 for a fairway wood.

    Way to help grow the game Taylormade…. You brazen hypocrits you!

    Thumbs Up!!

    • joe doaks

      Apr 7, 2014 at 10:29 am

      What a ridiculous comment.

    • greg norm

      Apr 7, 2014 at 10:34 am

      Heads up! The days of it being cool to be hyper-critical of everything TaylorMade does have past. Your comment isn’t cool.

      • Jeff

        Apr 7, 2014 at 10:49 am

        No, it’s still cool. We haven’t even received our order of Jetspeed stuff and now the big stores are already offering ‘buy a Jetspeed Driver rcv a Jetspeed fwy wood or hybrid free’ deals.TM has no interest in the small guy.

        • Alex

          Apr 7, 2014 at 6:22 pm

          Fulfill your duties and keep tailor-made happy and you wouldn’t have an issue. I’m sure you jacked them around at one point and now they’re jacking you around. You need them more than they need you. Its sad you don’t realize that.

          • Alex

            Apr 7, 2014 at 6:22 pm

            TaylorMade**

          • Jeff

            Apr 8, 2014 at 12:01 pm

            Haha Alex….you seem to know it all. No, never jacked them around. Bills paid on time etc. Do we need them ? No. We sold more Titleist drivers last season than Callaway and Taylor Made combined. What’s more, we can still sell Titleists at the same price today as last year. The R1s we have are being sold at 50% off. I’m not saying Taylor Made is no good, just saying they are not interested in the smaller guys. Their prerogative I suppose.

          • Jeff

            Apr 8, 2014 at 12:05 pm

            On a side note, do you realize the absurdity of your comment ? The retailer is one of their customers. The customer is supposed to fulfill their duties and keep the manufacturer happy ??????

      • ya

        Apr 8, 2014 at 6:37 pm

        LOLs

  16. c masty

    Apr 7, 2014 at 10:07 am

    Where’s the slider?

  17. Matt

    Apr 7, 2014 at 9:56 am

    How does it compare to the ping rapture?

  18. Sldr

    Apr 7, 2014 at 8:54 am

    Love the look of this

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Cobra launches new limited-edition Darkspeed ‘season opener’ driver

Published

on

Cobra Golf has today introduced a new limited-edition Darkspeed season opener driver in celebration of golf’s first major.

The new Darkspeed season opener limited edition driver combines a unique colorway with azaleas on the sole and Augusta green highlights for a festive, spring feel.

The driver comes paired with a matching limited edition head cover and a Mitsubishi Tensei 1K Black shaft in choice of X, S, or R flex and 9- and 10.5-degree loft options.

The Cobra Darkspeed season opener driver is available in X and LS models and retails for $649. It is available now on cobragolf.com.

Your Reaction?
  • 1
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (3/29/24): Mint Miura MB 101 irons

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a set of Mint Miura MB 101 irons.

From the seller: (@Citixen): “MINT Miura MB 101 5-PW KBS $1700 + Shipping. Miura MB 101 irons 5-PW with KBS C-Taper Lite X Stiff shafts +0.5″, Standard Loft and Lie. Mint condition, includes magnetic head-covers.”

To check out the full listing in our BST forum, head through the link: Mint Miura MB 101 irons

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Chesson Hadley WITB 2024 (March)

Published

on

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 70 TX

3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 80 TX

Irons: Titleist T200 (3), Titleist 620 CB (4, 5), Titleist 620 MB (6-PW)
Shafts: Graphite Design Tour AD DI 105 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)

Wedges: Titleist Vokey Design SM10 (52-12F, 56-14F), WedgeWorks (60-K)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball
Grip: Odyssey

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1x

Check out more in-hand photos Chesson Hadley’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending