Connect with us

Equipment

Callaway X2 Hot and X2 Hot Pro Irons

Published

on

The most important new feature of Callaway’s new X2 Hot and X2 Hot Pro irons is something that on first glance, golfers might not even notice: Chevron-shaped silver arches on the back of their cavities.

While they look like part of the badging, the arches are actually cast into the faces of the 17-4 stainless-steel irons and play a key role in stabilizing the upper portion of their face. That improves the sound and feel of the irons, and makes them more consistent.

X2 Hot irons

callaway x2 hot

Photo above: Callaway’s new X2 Hot iron are 40 percent more consistent than the X Hot irons. 

The X2 Hot irons don’t have the high-strength 455 carpenter stainless-steel faces of Callaway’s Apex irons, but their stabilizing arches allow the lower portion of their faces to flex more at impact. That moves their sweet spots lower, where most golfers contact their iron shots. It also helps shots hit below the sweet spot retain more ball speed and launch angle, a big part of the X2 Hot’s 40 percent improvement in consistency.

callaway x2 hot iron

Photo above: The X2 Hot irons have a deeper undercut behind the face, which helps make them about 2.5 yards longer than the X Hot irons.

The position of the mass in the X2 Hot iron heads was also changed to make them look less overtly like game-improvement irons. While the blade lengths, top lines and amount of offset remain very similar, the irons were slimmed substantially from front to back.

X2 Hot, X Hot comp

Designers were careful to keep the X2 Hot irons as forgiving as last year’s model, and at the same time move the center of gravity slightly lower and more forward. That, along with the deeper undercuts behind the faces of the irons, helps make them about 2.5 yards longer than their predecessors. The sole widths are also about the same size as they were on the X Hot irons, but 2-to-4-degrees more bounce was added to help golfers improve their turf interaction.

callaway x2

Photo above: A Callaway X2 Hot iron, viewed from address. Its toplines are thicker than those on Callaway’s X2 Hot Pro irons. 

Like Callaway’s Apex irons, the X2 Hot irons have Callaway’s 30-degree wide-spaced V grooves. They will be available Jan. 17 and cost $799 with True Temper’s Speed Step 85 steel shaft (regular and stiff flexes), $899 with Callaway’s X2 Hot 60-gram graphite shaft in lite, regular and stiff flexes.

Screen Shot 2013-11-11 at 10.42.56 AM

X2 Hot Pro irons

callaway x2 hot pro

The most important feature of Callaway’s X2 Hot Pro irons for many golfers has nothing to do with their performance. It’s their price, $899, which makes them the cheapest players iron in the company’s 2014 lineup.

The main reason the X2 Hot Pro irons are $200 cheaper than Callaway’s other new players iron for 2014, the Apex Pro, is their construction. The X2 Hot irons are cast, a more cost-efficient way to make irons than the forging process used to make the Apex Pro irons. But just because an iron is cast doesn’t mean it can’t offer premium performance.

Screen Shot 2013-11-11 at 7.54.36 PM

The new irons lose the undercut cavity that was used on last year’s X Hot Pro irons, giving them a much more compact look. And like the Apex Pro irons, their soles are inspired by the popular soles on Callaway’s 2013 X Forged irons, giving the X2 Hot irons soles that are thicker in the center and thinner in the heel and toe to help better players improve their turf interaction.

callaway x2 hot pro

The X2 Hot Pro irons also have a stabilizing arch cast into their cavity, which helps give the irons more consistent ball speeds than last year’s model and also removes unwanted flexure of the irons’ toplines, contributing to irons’ better sound and feel.

Included also is Callaway’s CG Height progression, which moves weight lower in the long and mid irons for a higher launch and less spin, and higher in the short irons for a lower launch with more spin. The short irons also have less offset than the X Hot Pro short irons, giving them the cleaner look that many better players like to see from their short irons.

2c2ede804fb12bf1787d8a20c8ef635611fa801fe003b59cea2e018633b3a74362a4811975311a4ff08176da2093928a72879f7ac802e8383e90e0485b44368d

The X2 Hot Pro irons will be available Jan. 17. They have the same 37 wide-spaced V grooves as Callaway’s Apex Pro irons, and come stock with True Temper’s Project X 95 shaft, available in 5.5 (regular) and 6.0 (stiff) flexes.

Screen Shot 2013-11-11 at 8.02.12 PM

Click here to see what GolfWRX Members are saying about the X2 Hot and X2 Hot Pro irons, as well as the rest of the company’s X2 Hot lineup.

Your Reaction?
  • 183
  • LEGIT32
  • WOW31
  • LOL20
  • IDHT11
  • FLOP16
  • OB21
  • SHANK271

34 Comments

34 Comments

  1. steve parlak

    Apr 26, 2015 at 12:56 am

    where can i get a calloway x 2 hot 3 iron

  2. Jimbob

    Jul 10, 2014 at 12:19 am

    Little tip…It does not, repeat does not matter what an iron “looks” like or how low the lofts are. What does matter is how it performs for your swing PERIOD. Get off your high horses and come on out to the course where a 44* X2 Hot Pro PW will go further, and straighter than your super awesome, non-cheap looking, shiny, forever wearing, most workable, forged PGA tour only blades.

  3. Jeff

    Apr 16, 2014 at 8:51 pm

    I tried X Hot irons with graphite last fall and they weren’t enough to change. This Spring I traded my Razr X irons with Uniflex steel for X2 Hot irons with graphite to help with aging elbows. They are super hot, feel great on impact and their control beats my old Raz X irons. That’s hard to do! Over 50 years I have played my brands including Ping, Mizuno, Taylormade and Hogan. These remind me of my Hogan Edge irons I loved. Great club Callaway!

  4. Iron2850

    Feb 25, 2014 at 6:22 pm

    I hit these irons yesterday at a PGA Tour superstore. I hit both X2 Hot and the X2 Hot Pro’s vs. last years X Hot…last years clubs were lighter feeling, due the deep undercut cavity…this years model seems heavier in the head, easier to feel. I know the lofts are much different than what we are used to, but I hit these clubs much higher and longer than my Titleist AP1 712’s. I was hitting the X2 Hot 7 iron 170 and 26 yards high vs. the AP1 6 iron at 160 and 7 iron at 150, 18 yards high. I hit the X2 Hot 6 iron 180, 25 yards high. I am a notoriously low ball hitter which is why I am looking at these. Was hitting regular flex shafts in each club. Color doesn’t bother me much. Whether I hit them consistently (height and distance) are the most important variables to me. I would like to hear from anyone who has played these outdoors. AT $699 they allow Callaway to provide solid clubs at a lower price point than the Apex line. Thanks.

  5. Pingback: Callaway Golf Razr Xf Pitching Wedge

  6. marko

    Nov 16, 2013 at 2:20 am

    I dont get it? Forged clubs with a cast face. and clevelands cast clubs with a forged face. What is the difference in performance?

  7. Andrew

    Nov 13, 2013 at 6:16 pm

    This does not seem like Callaway’s best effort… very surprised.

    • Keith

      Mar 12, 2014 at 6:45 am

      Andrew I dont know why you would say that? The irons have a distinct look of the old X16-X18 irons from the top. After hitting the Apex Pro irons which I bought, I could not gedt them airborne. A mate of mine – a pro suggested to go back to a more cavity back Iron with a softer shaft. Which I did, the X Hot 2 irons with a regular shaft. And all I can say it was the best thing I ever did. Ball flight is sensational and easier an extra club longer. These things are great to hit, very easy. I am not a wood duck (4 marker) but im getting older so this has help slow my golf swing down, get into better positions at impact and boom.

  8. Joe

    Nov 13, 2013 at 5:19 pm

    I have played Callaway for more than a decade. I cannot believe the looks of the new irons! I wasn’t crazy about the new Apex/Apex Pro…but the new Hot line is terrible looking. Callaway has made such great improvements through the last 4 or 5 years…I am afraid that they have really gone backwards.

    Players won’t play ugly clubs…no matter how they perform.

  9. jgpl001

    Nov 13, 2013 at 4:42 pm

    These look cheap and Callaway have taken ten steps backwards

    Callaway you are going out of business if you keep this up – REALLY

    • marko

      Nov 16, 2013 at 2:15 am

      I have no idea what you guys are looking at? These irons look good and will sell like crazy.It’s all about performance. If they work they start to look good.

    • Keith

      Mar 12, 2014 at 6:49 am

      I could not care if they looked like shovels. They perform! They are long and the flight is high – amazing flight. Easily the most friendly set of clubs I have hit. Put them down and look at them. They look like the old Callaway’s which I loved. Once you see the flight, you would not care if they were pink.

  10. Jamie

    Nov 13, 2013 at 2:20 pm

    I hit the apex iron at the golf show in London, I have a set of Diablo forged with ozik had program shafts, they do not compare to the Diablo forged. The apex is just another offering to the market along with the x2 so callaway now mass produce products like taylormade, but if you hit the apex iron and have the chance to compar it to the legacy black, it’s night and day!!!
    The legacy black is a rolls Royce to the apex, x hot, x hot pro,
    Guess that’s why henrik stenson gamed them on route to the fed ex cup ,
    The apex and the x2 hot are just tweaked versions of the previous.

  11. Hiball

    Nov 13, 2013 at 1:05 pm

    Like every other club manufacturer, they tweak a iron from 6 months ago and everyone jumps on it. Think about it. Every driver is 5-10 yds longer than the previous model. Realty. I should be driving the ball 420. And the longer strong lofted irons? What a joke. You have such a huge gap from the pw to lw? But consumers buy into it. “I’m hitting my 6 iron 215” really? With a 4-5 length and loft. You all are suckers. And the manufactures thank you every year. What a joke.

    • KK

      Nov 13, 2013 at 11:39 pm

      So what irons do you play?? Wilson blades, Lynx Black Cats, Spalding, do your irons have wooden shafts? If by your theory, none of the latest iron offerings are improvements over their predecessors, no one should ever buy a new set of irons. If manufacturers never came out with new products, there wouldn’t be any reason for consumers to buy anything new. If all consumers thought like you, they wouldn’t ever buy anything new no matter how many different models manufacturers made. So who is right, you or the manufacturers?

  12. Ryan

    Nov 12, 2013 at 7:17 pm

    Nothing says “players iron” like a 45 degree pitching wedge.

  13. Santiago

    Nov 12, 2013 at 4:39 pm

    The problem with Callaway is Quality, I get why they are more profitable on their iron business, because they are cheap made. I bought the X Hot Pro and I can’t complain about their playability, they work great for me. But, i have owned them for 5 months and they wear so much, they already look worse than my 9 year old Taylormade RAC LT2 (My previous set) that I used a million times. The X-Hot Pro look like I have been hitting rocks every day since I got them. I clean my clubs after every round and I care about the way they look.
    I contacted them through Twitter and their answer was that this is perfectly normal. This is the first time I tried a Calaway product and for sure will be the last one, I will never waste my hard earned money on their cheap made products and their customer careless company.

    Some pics:
    2013 Callaway X-Hot Pro http://pic.twitter.com/rnkVFECQWQ
    2004 Taylormade RAC LT2 http://pic.twitter.com/5MdJSWpciM

    • Joe

      Nov 13, 2013 at 10:21 pm

      You’re probably a little misguided…basing everything on one experience. I have owned Callaways for years, and overall, have been very pleased, both with the high quality components and also design. I also own Titleist and TM stuff, and think they are all basically the same as far as quality.

    • Joe

      Nov 13, 2013 at 10:25 pm

      Also, I have RazrX forged that are 2 years old that don’t look nearly as aged as your XHots… I do understand your aggravation though.

    • james

      May 19, 2014 at 1:54 pm

      I have the exact same issue with Callaway XHot Pros series irons with one additional issue. The sole of my PW has cracked after only 6 months of play. No abuse, just golf. I’m 64 years old so I don’t slam my clubs into the ground, I don’t hit rocks etc. So, after very minimal use the PW has cracked and the clubs look 10 years old. I like the performance of the clubs but very poor quality club head material.

  14. Shawn

    Nov 12, 2013 at 2:53 pm

    My personal opinion is they hit it out of the park with the Apex line. I don’t see the reason for them to bring a competing club like the Xhot Pro to market? OEM needs to be careful with the iron lines and having to many products on the market.

    • Oldplayer

      Nov 13, 2013 at 2:34 pm

      Very different price point I imagine.

      • Shawn

        Nov 13, 2013 at 5:09 pm

        They said $200 dollar difference. I don’t think that substantial enough to buy a cast club over a forged product.

    • Keith

      Mar 12, 2014 at 6:53 am

      Shawn I hit both sets. The Apex and the X Hot 2 irons are completely different in feel. My honest opinion, the X Hot is better and a lot cheaper.

  15. Jon W

    Nov 12, 2013 at 11:57 am

    Copied Pings “Chevron”?

  16. Rich

    Nov 12, 2013 at 10:12 am

    Looks like the Wilson Staff M3 irons. Rather have the M3.

  17. B

    Nov 12, 2013 at 7:54 am

    Are Lefty’s going to miss out on the A Wedge again this Year!!!

  18. Jack

    Nov 12, 2013 at 2:19 am

    Interesting that they are not doing the cut cavity. Yet they are able to keep it just as forgiving.

  19. Paul

    Nov 12, 2013 at 1:17 am

    Pros look great, i sold my razr x tours and grabbed some titlesit CBs. Maybe should have waited for these…? Probably not.

  20. EM

    Nov 12, 2013 at 1:15 am

    X2Hot from the top line reminds me of Callaway clubs of old, like the X-series irons (12, 14, 16, etc) starting from more than a decade ago. Which is a good thing, as it will remind a lot of people of what they were using back in the day and bring them back to these clubs.

    The X2Hot Pros look awesome! They look really solid.

    • Keith

      Mar 12, 2014 at 6:55 am

      I Have a set, and could not agree with you more. Look like the X 16 but with longer and better flight. They are on a winner

  21. Soul

    Nov 12, 2013 at 1:11 am

    whoa the xhot pros are literally a club stronger than most players irons. I’m surprised they would do this with the xhot pros They sure look nice!!

    • Tyler

      Nov 12, 2013 at 11:18 am

      I think cuz they lowered the cg s much. Crazy though, 24 degree 5 iron.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 10
  • LEGIT3
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (3/28/24): L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a L.A.B. Golf Mezz.1 Max Broomstick putter with LA Golf Paige Spiranac shaft.

From the seller: (@hibcam): “L.A.B. GOLF Mezz.1 Max Broomstick- LA Golf Paige Spiranac Shaft- 44″/79.5. Brand new, never used brown leather cover. The head was professionally anodized from Orange to Blue (Orange looked bad with the Pink shaft so I had it changed). Only a few rounds on this combo. Please see last pic- slight ding on back corner. 8.5-10 condition. THE SHAFT COST $475/ THE PUTTER $625. $799 shipped in the US. ONLY $699 SHIPPED.”

To check out the full listing in our BST forum, head through the link: L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Tony Finau’s driver shaft change at the 2024 Texas Children’s Houston Open

Published

on

Tony Finau has always been known as one of the longest players on the PGA Tour, but he has recently been working on adding a little more distance. Last year, Finau averaged 118.3 mph club head speed and 178.08 mph ball speed, all while playing a Mitsubishi Diamana D+ Limited 70 TX driver shaft. This year, he has increased his club head speed to 123.93 mph and his ball speed to 183.32 mph.

However, Finau’s overall distance has decreased by two yards in that time. From a fitting perspective, something was amiss. We asked Tony about the shaft change at the Texas Children’s Hospital Open.

“[I’m seeing] better numbers with the spin. My driver’s been a little high spin for me over the last month or so, and so I just figured it was time to probably check out the equipment,” Finau said. “And it definitely showed me that I was using a shaft that’s maybe a little too tip-stiff for me, the way I load the club now. [I’m seeing] better numbers with the spin.”

Finau switched from the Mitsubishi Diamana D+ Limited 70 TX into the Diamana GT 70 TX. The newer Diamana GT has a slightly different profile than the D+ Limited with the stiffest handle section in the Diamana lineup. The mid sections between the two are similar stiffness but the tip is just slightly stiffer in the Diamana GT. Both shafts are within one gram of each other in the 70 TX. The torque rating on the GT is 0.1 higher than the D+Limited’s 2.7 measurement.

Mitsubishi lists the Diamana GT as a shaft between the mid-launching Diamana TB and the new low-launch Diamana WB shafts. For most players, it would be considered a mid/low launch and low-spin shaft option. Mitsubishi’s Xlink Tech Resin System makes sure the maximum carbon fiber content is there for smooth feel without reducing the strength of the shaft. MR70 carbon fiber is used for reinforcing the shaft and boron is used in the tip for its high strength and compression properties.

Finau is still using his trusty Ping G430 LST driver in 9 degrees and has the adjustable hosel set to -1 degree of loft (standard lie angle). Finau’s long-time favorite Lamkin UTX Green grip is installed. He definitely has a few extra wraps of tape under that grip as you can see the bulge down where the grip meets the shaft.

One final note: Per Ping’s PGA Tour rep Kenton Oates, Finau’s driver is also adjusted to play with an additional degree of loft to help dial in his desired launch.

We’ll see how he fares with the new setup this week in Houston!

Your Reaction?
  • 19
  • LEGIT4
  • WOW4
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending