Equipment
Poulter chooses Odyssey White Damascus putter for The Open
Last week, Ian Poulter took to twitter to ask for help choosing a new putter for The Open Championship. (Click here to read our full story).
I am sacking my putter, I will use a new putter at the Open. Putter manufacturers please send me some to try to my IJP office please.
— Ian Poulter (@IanJamesPoulter) July 7, 2013
As expected, putter makers jumped on the opportunity to get their putters in the hands of the European Ryder Cup star, sending retail store-sized shipments to Poulter’s IJP offices.
Eight days after Poulter’s proclamation (10:08 p.m. local time at Muirfield), he was true to his word and confirmed on Twitter that he would switch to a new putter.
My putter is selected for the week. It is an Odyssey White Damascus. Rolling it very nice. Testing over for now. http://t.co/tU4ICJPr72
— Ian Poulter (@IanJamesPoulter) July 16, 2013
Poulter’s new putter is the same brand as his old putter, an Odyssey White Hot XG #7, but it’s a new model from the company.
The putter’s official name is “Odyssey White Damascus iX #1,” and while it has yet to be announced in the United States, but it has been publicized in Japan, where it is expected to be released in September.
Click here to see photos of the rest of the clubs in Poulter’s bag.
According to a Callaway representative, the putter has an insert made of Damascus Steel, which is known for its almost mythical strength and has been used to make samurai swords for hundreds of years. The Damascus insert has Odyssey’s Metal X face pattern chemically milled into it, and another insert made of soft urethane insert behind it.
The back flanges of the Anser-style putter are made of tungsten, which Odyssey says moves the CG low and deep in increase the putters moment of inertia (MOI).
So what did Poulter do with the rest of the putters he was sent? According to his Twitter account, his staff will be in touch with putter makers and ship the putters back to them.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Drew Brees WITB 2024 (April)
View this post on Instagram
Driver: TaylorMade Stealth 2 Plus (10.5 degrees)
Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)
5-wood: TaylorMade Stealth Plus (19 degrees)
Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)
Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)
Putter: Scotty Cameron Select Newport 2 Prototype
Check out more in-hand photos of Drew Brees’ clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Putter Roundup: 2024 Zurich Classic of New Orleans
We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)
MJ Daffue’s Scotty Cameron T-11 Prototype
MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.
Scotty Cameron T-7.5 Prototype
We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.
Alex Fitzpatrick’s Bettinardi SS16 DASS
Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.
Steve Stricker’s Odyssey White Hot No. 2
This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.
Doug Ghim’s Scotty Cameron T-7 Prototype
This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Spotted: Project X Denali hybrid shaft
Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.
Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.
The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.
Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.
Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!
- Check out the rest of our photos from the 2024 Zurich Classic
- Check out in-hand photos of Daniel Berger’s full WITB here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole3 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Blaise
Jul 22, 2013 at 5:03 pm
“high end” putters sell better in japan.. well that’s because the product is made for $50 in China an then sold for $540 in japan. so if that is how this club manufacturer is run it is a perfect example of why our economy is where it is today. you take these billion dollar corporations to China, take away the jobs from us, so no one has the money to buy these “high end” putters that realistically should sell for $150-$200.
J
Jul 19, 2013 at 9:06 am
Odyssey…
If its available there…it should be here. Plain and simple.
Shouldn’t have to pay duties to get a product from an American company.
Boooo…
Josh
Jul 18, 2013 at 11:46 am
Wow… according to some of you, I hope Poulter never tries to take the INSERT out and use it as a dagger or fashion it into a cannon. I certainly hope that he considered that much more than he did how the ball might actually feel to him coming off the face of the club.
BallzDeep
Jul 18, 2013 at 10:50 am
You guys are absurd. People all over the world drool over golf clubs made with BeCu, Terillium(sp?), urethane, aluminum, speed slots, circle T stamps, buzzing bee’s, white paint, etc. You wouldn’t do that on a cannon either. The fact that they have a tour player with 1.5 million Twitter followers who had an open tryout for the putter he chose for his most important tournament of the year probably means they’re going to sell.
I also think this is a way cooler way to intro a putter to the world than quite possibly the douchiest video of all time.
http://www.youtube.com/watch?v=5jPxtHqj5hY
I’m not a Scotty hater at all, but this video makes me laugh so hard at the other tools in the room that buy into his magic.
golfa8
Jul 18, 2013 at 9:06 am
He should have tried the “Tank”. It fits his Ryder Cup profile.
Blanco
Jul 17, 2013 at 5:57 pm
Perfect putter for Poulter. Shiny ancient steel with cloak and dagger graphics– will go well with gold pants and a leather cape.
Ah thnxBlancO
Jul 18, 2013 at 3:55 am
Thanks Blanco for making my night. Poulter, couldn’t you have just walked out onto the practice green and found one? Drama dawgs and Englishmen
Hamkenstein
Jul 17, 2013 at 5:45 pm
I think it’s the decorative part that’s important here. That’s why the money is spent on bespoke/ custom finish putters. Not to much worry about a putter blowing apart.
MarkInChiTown
Jul 17, 2013 at 4:24 pm
Sorry to burst your balloon Odyssey, but Damascus Steel has for hundreds of years been known as very cheap and very unreliable steel. Its poor quality made it affordable, but very dangerous to use. Cannons made from
Damascus Steel were known to blow apart! You won’t be selling any of these in Europe, or the far east. I’m surprised you have no metallurgists on your staff. They could have saved you from making fools of yourselves…
BIG
Jul 17, 2013 at 4:28 pm
That’s what I’m saying. Lots of better steels out there.
Drew
Jul 17, 2013 at 1:28 pm
Hey Odyssey brand team…You talk about this steel being used to make samurai swords and then you go and put an English excalibur sword on the sole?
Odyssey_PM
Jul 17, 2013 at 2:25 pm
A couple points of clarity since there seems to be some confusion here:
– We never said this wasn’t being released in the United States. Stay tuned. Why Japan first? There is a much larger high end market for putters there. We have roughly 50% market share there and sell $500+ putters in droves. Retailers in the U.S. will not stock them because US consumers won’t spend that much except in limited numbers.
– Damascus has been used by expert metallurgists for thousands of years in daggers, swords and all sorts of other executions. Samurais were not the only ones that used this type of metal.
– Things are changing…the fact that we even allow tour players in the U.S. or Europe to use a putter that we’d sell predominantly in Japan is a big change. We saw a guy shoot 59 on the Web.com with one this past week and we another player choose one here.
Seriously…stay tuned. We might surprise you with how we operate now. To pass on us because of actions in Callaway or Odyssey’s past is big mistake. All we can do it is prove it to you.
BIG
Jul 17, 2013 at 4:03 pm
I work for a knife company and I can tell you there are a lot of better steels than Damascus. Damascus, while quite a bit more expensive, is more decorative than anything.
Matt
Jul 18, 2013 at 12:16 am
Yeah America’s economy has been sucking for the last five years and I’m sure that’s put a hurting on the high end putter market. Can’t say I blame you guys for taking new products to the Japanese market first. Hey but for the record I love my new low end white hot pro #9.
Tony Lynam
Jul 22, 2013 at 9:28 pm
And to add, Damascus refers to the legendary sword makers in the middle east (whose stamp looks like a Star of David). We have those stamps on our Marine NCO and Officer swords (the Mamaluke).
Matt
Oct 2, 2015 at 2:03 pm
+1 to Tony. Know this is an old article, but author needs to get this kind of thing right. Damascus steel is 100% a medieval steel from the middle east, hence the name… Damascus is the capital of Syria… Damascus steel was NOT used to make samurai swords. Tamahagane or other specialized steels were used in Japan.
Also, BIG, while you may have worked for a knife company, they probably did not use true Damascus steel. Modern Damascus is generally made simply by folding the metal during the forging process so a “water” pattern forms. Also see “Wootz steel” and “Crucible steel” for other similar metals found in different areas of the world. The forging process of ancient Damascus has been lost to time, though certain metallurgists have set out to try and recreate the composition. It is NOT a brittle metal, but in fact was known for being extremely strong while having great flex to it. There were actually carbon nanotubes present in the original composition, well before nanotechnology was in place.
Basically, everyone above Tony is COMPLETELY WRONG in what they are stating…
Nice try haters, but you are simply misinformed.
-Matt
Displayname
Jul 17, 2013 at 11:55 am
That insert/face combo looks AWESOME! Could finally be a replacement for my old White Steel insert. Bring it to the US and bring back the SRT 2 ball and I’m sold!
Ben Hudson
Jul 17, 2013 at 7:49 am
Viral marketing – 1
the rest of us – 0
shanked
Jul 17, 2013 at 12:08 am
I understand that Japan has a large market, but seriously?!? We get stuck with Versa while they get these? I’d game that any day of the week. Maybe I need to tweet out that I’m looking for a new flat stick…
gunmetal
Jul 18, 2013 at 12:39 pm
You can game this when it gets released to Japan. It will cost you $549 but that’s what they pay for it in Japan.
NB
Jul 16, 2013 at 11:13 pm
Pretty cool putter picked by poulter, he should ebay the other ones he didnt select and donate it to charity though. Then he could choose new clubs constantly and make lots of donations.
J
Jul 16, 2013 at 10:16 pm
Sick!
It’s still frustrating that an American Company release product in Japan WAY before if ever at all in the United States.
Pretty serious turn-off when it comes to buying Callaway.
Blaise
Jul 16, 2013 at 11:26 pm
agreed. maybe that’s why i dumped my odyssey for the american made bettinardi
john
Jul 16, 2013 at 11:27 pm
the market for golf clubs in japan is so much larger that it would be silly not to release things there first…they sell to a year round market of a much greater percentage of golfers/population, they can sell it for more AND they get to see what sells and what doesn’t over there before bringing it here. on a side note, most of the stuff is made in asia so its already over there anyway…its been happening for years and EVERY company does it…callaway, taylormade, and even TITLEIST…you can find all the stuff online if you’re willing to pay
optumus
Jul 17, 2013 at 12:05 am
actually, scotty putters are milled in socal, not china
AndyJ
Jul 18, 2013 at 9:55 am
Actually Scotty’s putters are made in Mexico
J
Jul 17, 2013 at 12:14 am
At least release it here.
Philip Nielsen
Jul 18, 2013 at 10:55 am
Good point, I think people on here forget that these club manufacturers are companies lol.
Philip Nielsen
Jul 18, 2013 at 10:55 am
Good point, I think people on here forget that these club manufacturers are companies seeking profit lol.