Connect with us

Equipment

Review: Vokey Hand Ground Wedges

Published

on

Pros: Hand Ground wedges are made by the same craftsmen who create wedges for tour players. It’s one of the few custom wedge programs that allows consumers to select their favorite grind and tweak it to their preference. It also marks the first time average joes can get their hands on a raw Vokey wedge.

Cons: $350 is a lot for a handmade wedge, but it’s not out of line with Vokey’s competitors. Wedge fanatics will be disappointed that they can’t get handmade pitching wedges, gap wedges and sand wedges.

Bottom Line: A variety of stamping, shaping and sole options makes Hand Ground the go-to lob wedge program for exacting golfers. And if you want your wedge to come off the same grinding wheel as Adam Scott’s wedge, Hand Ground is for you.

Overview

Hand Ground isn’t the average wedge customization service.

Yes, like others it allows golfers to get their wedges with different stamps, letters and phrases. And it also gives golfers the option to pick a custom ferrule, shaft and grip. But Vokey’s WedgeWorks programs already provided all of those options before Hand Ground, along with the ability to purchase WedgeWorks exclusives — limited-edition and TVD wedges that are not available in stores.

Where Hand Ground breaks ground is in its focus on customizable grinds and wedge shaping, which allows golfers to tweak their favorite Vokey grind to their exact preference.

IMG_3083

Four customizable grinds are available through Hand Ground: Vokey’s E Grind, M Grind, T Grind and V Grind, all of which have different playing characteristics. But the beauty of Hand Ground is that even if a golfer were to select a high-bounce wedge, such as a V Grind, he or she could have the wedge tweaked to play with less effective bounce.

That option, called “Pre-Worn” leading edge, is created by grinding off some of the metal on the front of a wedge’s sole. It works to “roll” the leading edge into the sole, allowing the leading edge to sit closer to the ground at address and cut through the ground better in firm conditions.

Conversely, a low-bounce wedge such as Vokey’s T Grind can be made to play with more effective bounce through the addition of a “Pro groove,” a small channel ground into the center of a wedge’s sole that moves the contact point forward. According to Bob Vokey, it can help golfers keep their wedges from digging into the ground on short pitches.

handground_ftr_2

Above: A Vokey Hand Ground wedge with a pre-worn leading edge and a pro groove. 

Aesthetic changes, such as making the leading edge straighter, the toe squarer or the top line thinner are also possible through Hand Ground.

It should be noted that Vokey is not the only wedge company to offer its grinding services to the public: Cleveland, Edel, James Patrick, Ping, Scratch and others offer wedge grinding and customization services, and unlike Vokey those companies expand their services to pitching, gap and sand wedges.

But none of those companies can claim the high usage of its wedges on the PGA Tour that Vokey boasts, which is the most mesmerizing part of the Hand Ground experience.

BPVMe5wCEAAMlpX

Above: Bob Vokey grinding a Hand Ground wedge for a customer at the Vokey tour department in Carlsbad, Calif.

Since Hand Ground wedges are created in Vokey’s tour department in Carlsbad, Calif., they’re made on the same machines by the same grinders that produce wedges for Adam Scott, Steve Stricker, Jason Dufner and the dozens of other Vokey wedge players on the PGA Tour.

20130703095932_00003

Above: Each Hand Ground wedge comes with a certificate of authenticity that include the wedge’s specs and is signed by the person who ground the wedge.

Vokey Hand Ground wedges cost $350, and are available for purchase through Vokey’s website. All Hand Ground wedges have a raw finish, which means they will rust over time. According to Vokey, the build time of a Hand Ground wedge takes 10 days from the time the order is confirmed, not including shipping.

Performance

My Hand Ground was made with Vokey’s M Grind — the same grind that was on my current lob wedge, a retail Vokey SM4 60-10. I also ordered it to the same specs, which means that my Hand Ground wedge was nearly identical to my 60-10 on paper — same shaft, grip, swing weight and SM4 grooves. But when I took it to the course, the wedge performed differently thanks to the addition of a pre-worn leading edge.

IMG_3094

Above: A Pre-worn leading edge on a Vokey M Grind Hand Ground wedge.

According to David Neville, Vokey’s marketing manager, wedges with pre-worn leading edges are requested by several tour players. The orders spike in the time before players are scheduled to head overseas for The Open Championship, where the modification helps golfer deal with the faster, firmer conditions that are typical on links golf courses. But you don’t have to be an Open Championship contestant to benefit from a pre-worn leading edge.

I had success with my retail Vokey 60-10 wedge I was fit for in December on straight-faced shots that required a lot of speed, because it allowed me to hit down on the ball steeply without fear that the wedge would dig. But I sometimes struggled to slide the sole of the wedge under the ball on delicate pitch shots from tight lies.

IMG_3218

Above: The tale of two M Grinds. 

The pre-worn leading edge solved that problem, because it made the leading edge sit slightly closer to the ground. That made it much easier for me to slide the wedge under the bottom of the ball, allowing me to contact the ball a groove or two higher on the face. The higher contact point made the ball climb up the face more, creating softer shots with more spin.

IMG_3093

Above: Hand Ground wedges have the same SM4 grooves and face texture as Vokey’s retail wedge models to provide maximum spin. 

As expected, the pre-worn leading edge made the wedge slightly more susceptible to digging compared to my 60-10. But the digging was limited to shorter shots I hit with a straight face and a lot of speed.

I noticed very little difference in the way the wedge performed on full shots and opened-faced shots, which says a lot about the cleverness of Vokey’s sole modifications. Adding a pre-worn leading edge or a pro groove will change a wedge enough to help a golfer do this or that, but it won’t change the wedge completely.

Looks and Feel

IMG_3089

The second modification I had made to my Hand Ground wedge was having the top line made thinner, which Vokey does by removing a small amount of mass from the back of the top line. It’s a look that many golfers, particularly those who play irons with thin top lines, will appreciate at address.

Because Hand Ground wedges come with a raw finish, I speculated that they might have a slightly different feel than my retail wedges with a plated finish. But I was wrong —  I didn’t find any difference in feel.

I did notice, however, that my Hand Ground wedge appeared smaller at address than my Vokey 60-10 with a plated “Tour Satin” finish.

Since Hand Ground wedges have no finish, they will rust as soon as they are introduced to water. In general, wedges with darker finishes look smaller than wedges with lighter finishes, which is why the rusted finish of a Hand Ground will look smaller than a wedge with a Tour Satin finish.

The Takeaway

IMG_3090

If you’re a Vokey lover, there’s only two good reasons not to get a Hand Ground wedge:

  1. It’s out of your price range.
  2. You haven’t taken the time to learn what grind or grind modification will help you play better.

$350 is a lot to pay for a wedge, especially for golfers who like to practice and can wear out as many as two new wedges per season. But it’s a two-edged sword — usually, if golfers are willing to put in the time to practice their wedge game, they’re also willing to spend the money to have their perfect wedge built.

For golfers who don’t know what grind is best for them, I can’t recommend a wedge fitting enough. Wedge makers are offering more grind options on their retail wedges than ever before, and golfers who aren’t testing all the different retail bounce, sole width and camber options aren’t getting the most out of their wedge games.

If you’ve already done such a fitting and think that a program like Vokey’s Hand Ground can help you, you’re probably right. Aside from the putter, no club is more important to scoring than the lob wedge, and golfers should take care to make sure they’re playing one that fits them as well as possible.

Your Reaction?
  • 9
  • LEGIT1
  • WOW2
  • LOL1
  • IDHT1
  • FLOP1
  • OB1
  • SHANK4

20 Comments

20 Comments

  1. Tyler

    Aug 21, 2013 at 12:36 pm

    Just too expensive. C’mon, $350 for a damn wedge!

  2. Jateen Rama

    Aug 19, 2013 at 3:57 am

    I love these wedges – reminds me of my own hand ground Vokey wedge that ive ground myself with pre ground leading edge………. will post pix soon!!!!!

  3. Matt

    Aug 16, 2013 at 11:24 pm

    why don’t they sell raw vokeys off the rack?!?!?

  4. Tyler

    Aug 16, 2013 at 7:11 pm

    $350 is crazy. You can get a nice Scratch wedge for $180 that will perform just as well.

    I never really cared for Vokey’s anyway. My Ping Tour S Rustiques serve me well and they were $80 bucks.

  5. dunn

    Aug 15, 2013 at 3:01 pm

    Vokey doesnt make these…….sure there is a team of grinders there that do it…….$350 is way way to much

  6. Jordan

    Aug 11, 2013 at 11:32 am

    I’m a huge fan of vokey wedges, but $350 is just ridiculous. I’ll stick to the $130 wedge, that’ll work just as well as these.

  7. stephenf

    Jul 29, 2013 at 11:21 am

    Sometimes it’s not a matter of being “willing” to spend the money, you know. $350 is just outrageous, and it is symptomatic of the price-out that is going on with this once-great game. For a lot of people, especially teenagers or people working entry-level jobs, playing golf is a rare and expensive occasion rather than a regular thing. And if you have a family? If you want to raise your kids in the game, and the only courses in your area charge $20-30 and up for green fees? How are you going to do that with two or three kids, once or twice a week, if you’re anywhere near an average income earner?

    If we wanted to turn this game back into a pastime for the privileged few, if the great era of affordable public play is over, we could hardly do a better job than we’re doing.

    • Gary

      Oct 17, 2013 at 2:52 pm

      Good points. Golf is an expensive game as it is, and thankfully there are cheaper options out there for people who can’t afford the expensive stuff. If money were no object I might think about these ones but you can get a really nice wedge with a good grind for 120-150 bucks, or cheaper if you have some patience.

  8. Square

    Jul 28, 2013 at 5:09 am

    I wear them out too fast to justity this price….

  9. Finchi5

    Jul 26, 2013 at 5:37 pm

    Maybe why James ‘Patrick’ Harrington is joining the team!

  10. Zack

    Jul 26, 2013 at 3:35 am

    So who grinds the wedges off the rack?

  11. Bobby

    Jul 25, 2013 at 7:54 pm

    $350?!?! That’s crazy! You can get a custom grind and custom engraved Hopkins Golf wedge for $150 and a custom Cleveland wedge for $210! Why waste your money on a vokey when you can get the same, if not better wedge from Hopkins or Cleveland.

  12. Augustine

    Jul 25, 2013 at 9:28 am

    um… so the $149 Vokey Wedge is in fact… NOT made by Bob himself but just bears his name? what a surprise!

    For $350 I’d go with James Patrick…

  13. Lance

    Jul 25, 2013 at 7:07 am

    Great write up and photos. When the big boys start doing the little things like this, that usually means trouble for the smaller nitch companies. (Scratch)

    I’m excited to see more of these. What is the turnaround time?

  14. J

    Jul 25, 2013 at 1:31 am

    350.00 is just too much. 🙂

    • Gary

      Oct 17, 2013 at 2:47 pm

      Same here, nice club but too much for my blood. I will stick with my Cally Mack Daddy 2 with a Project X Flighted 95 shaft at no extra charge.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Spotted: Tony Finau’s driver shaft change at the 2024 Texas Children’s Houston Open

Published

on

Tony Finau has always been known as one of the longest players on the PGA Tour, but he has recently been working on adding a little more distance. Last year, Finau averaged 118.3 mph club head speed and 178.08 mph ball speed, all while playing a Mitsubishi Diamana D+ Limited 70 TX driver shaft. This year, he has increased his club head speed to 123.93 mph and his ball speed to 183.32 mph.

However, Finau’s overall distance has decreased by two yards in that time. From a fitting perspective, something was amiss. We asked Tony about the shaft change at the Texas Children’s Hospital Open.

“[I’m seeing] better numbers with the spin. My driver’s been a little high spin for me over the last month or so, and so I just figured it was time to probably check out the equipment,” Finau said. “And it definitely showed me that I was using a shaft that’s maybe a little too tip-stiff for me, the way I load the club now. [I’m seeing] better numbers with the spin.”

Finau switched from the Mitsubishi Diamana D+ Limited 70 TX into the Diamana GT 70 TX. The newer Diamana GT has a slightly different profile than the D+ Limited with the stiffest handle section in the Diamana lineup. The mid sections between the two are similar stiffness but the tip is just slightly stiffer in the Diamana GT. Both shafts are within one gram of each other in the 70 TX. The torque rating on the GT is 0.1 higher than the D+Limited’s 2.7 measurement.

Mitsubishi lists the Diamana GT as a shaft between the mid-launching Diamana TB and the new low-launch Diamana WB shafts. For most players, it would be considered a mid/low launch and low-spin shaft option. Mitsubishi’s Xlink Tech Resin System makes sure the maximum carbon fiber content is there for smooth feel without reducing the strength of the shaft. MR70 carbon fiber is used for reinforcing the shaft and boron is used in the tip for its high strength and compression properties.

Finau is still using his trusty Ping G430 LST driver in 9 degrees and has the adjustable hosel set to -1 degree of loft (standard lie angle). Finau’s long-time favorite Lamkin UTX Green grip is installed. He definitely has a few extra wraps of tape under that grip as you can see the bulge down where the grip meets the shaft.

One final note: Per Ping’s PGA Tour rep Kenton Oates, Finau’s driver is also adjusted to play one degree upright to help dial in his desired launch.

We’ll see how he fares with the new setup this week in Houston!

Your Reaction?
  • 10
  • LEGIT1
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Zac Blair WITB 2024 (March)

Published

on

Driver: Titleist TSR2 (10 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Red 6 X

3-wood: TaylorMade M5 Rocket 3 (14 degrees)
Shaft: Fujikura Speeder 757 Evolution V1 X

Utility: Titleist U510 (3)
Shaft: Aldila Tour Blue 85 X

Irons: Ping i210 (4-6), Miura MB-001 (7-9)
Shafts: Nippon N.S. Pro Modus3

Wedges: Titleist Vokey Design SM10 (46-10F, 58-08M @57, 60 @61), Vokey Design WedgeWorks (52-M)
Shafts: Nippon N.S. Pro Modus3 Tour 105 X

Putter: Scotty Cameron prototype

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1

Your Reaction?
  • 3
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Martin Trainer WITB 2024 (March)

Published

on

Driver: Wilson Staff Staff Model (6.5 degrees)
Shaft: Mitsubishi Kai’li Blue 70 TX

3-wood: Wilson Staff WLabs Prototype (13 degrees)
Shaft: Mitsubishi Tensei CK Orange 80 TX

Irons: Wilson Staff Staff Model (2, 4-9)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Wilson Staff Staff Model (52, 56, 60)
Shafts: True Temper Dynamic Gold Tour Issue X100

Putter: Bobby Grace Greg Chalmers Prototype

Grips: Golf Pride Tour Velvet

Your Reaction?
  • 10
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending