13 replies to this topic

[Golferpimp1]

See below, as always if you think my price is not fair, please make an offer.  Only thing im looking for on Trade are KBS Tour or C Taper shafts in Stiff + that need to be 1/2" over std, or standard if they are X flex (as I can soft step them).  Let me know if you have any questions.


KBS Tour Stiff Shafts - Taper Tip, one time pulls from a set of JPX800 Pros.  Played Std Length in JPX irons.  Price - $115 shipped



Scratch D/S 60* 1018 Forged Wedge HEAD ONLY.  I would say 8.5-9 out of 10 condition.  Not used much.  Price - $75 shipped





Scratch Forged 53* Head Only.  Bought it used, someone tried to stamp prototype and their initials on it.  Its a forged head, but was before the 1018, may have been a tour issue at some point.  I would say 7/10 condition, lots of grooves left.  I took a pic of the ding on the very heel side of the leading edge.  Price - $40 shipped





Mizuno Grips - Set of 8, 7 of them are the newer M31 model, the other is a mizuno version of the tour velvet .  All were used very little if any.  Price $30 shipped.


Mizuno MP-R12 wedges.  52/07 and 58/10.  Both are near new, used for 3 rounds and cleaned every time.  Come with TT Spinner shafts and midsize goodyear multicompound grips.  Price - $110 for the pair.  or $$65 each shipped.


And a BONUS pic of my little guy out at the golf course walking a few holes with me.  Hes not for sale!

[nutted]

Nice stroller. BOB's are the best!

[Golferpimp1]

Ha, thanks, agree.  Got a double BOB in the garage, just waiting on baby #2 to come in May!

[bsb70x7]

Great pic of the kid.  Do your clubs fit on the stroller somewhere too?

[thomaslv40]

dang I wish this would have popped up a few months ago...I just put the C-tapers S+ in my MP's and they were longer than standard but I just cut them to standard and soft stepped them and they are probably still a little to stiff

Edited by thomaslv40, 27 February 2013 - 03:24 AM.

[thomaslv40]

PM sent on the shafts

[2putttom]

What is the finish on the MP R12's?

[manhattan01]

If only my cart were as comfortable to push as those BOBs.

[GoLow79]

Pm sent on the R-12's

[scotty79]

I'll take the 58 r12 if still availible?

Thx

Jake

[plumbobn]

Golferpimp1, on 26 February 2013 - 10:01 PM, said:

See below, as always if you think my price is not fair, please make an offer.  Only thing im looking for on Trade are KBS Tour or C Taper shafts in Stiff + that need to be 1/2" over std, or standard if they are X flex (as I can soft step them).  Let me know if you have any questions.


KBS Tour Stiff Shafts - Taper Tip, one time pulls from a set of JPX800 Pros.  Played Std Length in JPX irons.  Price - $115 shipped
IMG_12101.jpg
IMG_12111.jpg

Scratch D/S 60* 1018 Forged Wedge HEAD ONLY.  I would say 8.5-9 out of 10 condition.  Not used much.  Price - $75 shipped
IMG_12021.jpg
IMG_12041.jpg
IMG_12051.jpg


Scratch Forged 53* Head Only.  Bought it used, someone tried to stamp prototype and their initials on it.  Its a forged head, but was before the 1018, may have been a tour issue at some point.  I would say 7/10 condition, lots of grooves left.  I took a pic of the ding on the very heel side of the leading edge.  Price - $40 shipped
IMG_12061.jpg
IMG_12071.jpg
IMG_12081.jpg
IMG_12091.jpg

Mizuno Grips - Set of 8, 7 of them are the newer M31 model, the other is a mizuno version of the tour velvet .  All were used very little if any.  Price $30 shipped.
IMG_11991.jpg

Mizuno MP-R12 wedges.  52/07 and 58/10.  Both are near new, used for 3 rounds and cleaned every time.  Come with TT Spinner shafts and midsize goodyear multicompound grips.  Price - $110 for the pair.  or $$65 each shipped. IMG_12001.jpg
IMG_12011.jpg

And a BONUS pic of my little guy out at the golf course walking a few holes with me.  Hes not for sale!
IMG_02621.jpg

Are either of the Mizuno wedges still available?

[clwehring]

What is the tip diameter on the shafts?

[A C]

PM sent for trade on KBS Stiff...check your inbox.

[sportzmaniak]

Are the mizuno wedges still available?