Jump to content

Welcome, Guest. You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with existing members and access to certain forums. Join our community today and enter into a chance to win a free regular giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

- - - - -

Wrenches - Does one fit all?


  • Please log in to reply
17 replies to this topic

#1 Sarbyturbo

Sarbyturbo

    Newbie

  • Members
  • Pip
  • 24 posts
  •  
  • Member #: 223719
  • Joined: 01/23/2013
  • Location:St Helens
  • Ebay ID:csarbutts1610
GolfWRX Likes : 0

Posted 15 February 2013 - 06:12 AM

I have both a TM R11 and a Titleist 910 torque wrenches. Though they are the same size and shape fitment, and both are apparently set at a torque measurement of 40 lbs, so I would guess you can use one wrench for both?

However, the Callaway Razr Fit weight and hosel screw is again the same size and fitment as the TM and Titleist, so the afore mentinoed wrenches will fit. However, is the Callaway wrench set at 40lbs torque pressure like the other 2 or is it less or higher, and will using say the Titleist wrench on the Callaway (if the Callaway wrench is a lower torque), damage the screw or head thread?

Any ideas?


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with existing members and access to certain forums. Join our community today and enter into a chance to win a free regular giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

#2 jnradioactive

jnradioactive

    JNRadio

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,340 posts
  •  
  • Member #: 44297
  • Joined: 12/21/2007
  • Location:New Jersey
GolfWRX Likes : 548

Posted 15 February 2013 - 07:38 AM

I don't know, but I learned a new word... Fitment

#3 Dbo35

Dbo35

    Member

  • Advanced Members
  • PipPipPip
  • 153 posts
  •  
  • Member #: 208723
  • Joined: 10/26/2012
  • Location:Us
GolfWRX Likes : 20

Posted 15 February 2013 - 08:46 AM

I know from personal experience that a cobra wrench will damage an r11s screw :(.

Edit: (its smaller)

Edited by Dbo35, 15 February 2013 - 08:47 AM.


#4 Arizonalefty59

Arizonalefty59

    Major Winner

  • Lefty Boomers
  • PipPipPipPipPipPip
  • 2,953 posts
  •  
  • Member #: 130198
  • Joined: 06/05/2011
  • Location:From the 508 to the 520
  • Ebay ID:AZlefty93
GolfWRX Likes : 382

Posted 15 February 2013 - 10:44 AM

I use a Razr Fit wrench in all my 910 woods and it works perfect.
Titleist 913 D3 10.5* w/ AD-DI 7s
Tour Issue X-Hot 15* w/ AD-DI 6s
Titleist 585H 21* w/ Alidila NV - S
Titleist 710 AP2's 4-PW
Titleist Vokey SM4's 52*,56*,60*
Odyssey PT-82/ Cameron Futura X

#5 dirtyboy

dirtyboy

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,730 posts
  •  
  • Member #: 47459
  • Joined: 01/29/2008
GolfWRX Likes : 48

Posted 15 February 2013 - 11:22 AM

They are using the same size and grade of machine screw so the torques should be the same.  TM, Callaway and Titleist do not make the machine screw.


#6 OUZO Power

OUZO Power

    #CALLAWRX2 @K_Kyriopoulos

  • ClubWRX Charter Members
  • 2,409 posts
  •  
  • Member #: 207419
  • Joined: 10/16/2012
  • Location:Brooklin, Ontario
  • Ebay ID:ouzolude
GolfWRX Likes : 528

Posted 15 February 2013 - 11:31 AM

Callaway, TM & Titleist use the same torx bit. But the Torque Setting on each wrng for each club is different.
Driver: Callaway Big Bertha Alpha 9.0
Woods: Callaway Big Bertha 3W & 5W
Irons: Callaway Apex 4-9, PW, AW, SW
Wedges: Callaway Mack Daddy 2 Chrome 60
Putter: Odyssey Metal X Milled #9HT
Ball: Callaway SS Yellow & SR-2

#7 dirtyboy

dirtyboy

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,730 posts
  •  
  • Member #: 47459
  • Joined: 01/29/2008
GolfWRX Likes : 48

Posted 15 February 2013 - 01:04 PM

View PostOUZO Power, on 15 February 2013 - 11:31 AM, said:

Callaway, TM & Titleist use the same torx bit. But the Torque Setting on each wrng for each club is different.

What are they?

#8 Sarbyturbo

Sarbyturbo

    Newbie

  • Members
  • Pip
  • 24 posts
  •  
  • Member #: 223719
  • Joined: 01/23/2013
  • Location:St Helens
  • Ebay ID:csarbutts1610
GolfWRX Likes : 0

Posted 15 February 2013 - 01:19 PM

Ok, I probably should just get my 💰 out and get myself a Callaway wrench, instead of being a such cheapskate and trying to get away without spending out on one! Times are tough ha 😉

#9 esketores

esketores

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,585 posts
  •  
  • Member #: 120324
  • Joined: 01/10/2011
  • Location:Land of the "Mogs"
  • Ebay ID:Hbarrel
GolfWRX Likes : 214

Posted 15 February 2013 - 01:42 PM

Diameter determines torque values. Steel into steel is one thing. But in the case of a golf club it is steel bolt into an aluminum tip.

And no way Jose is the value 40 lbs. For any club's screw/bolt/tip. Heck a 3/8ths shcs carries a 40 foot pound torque spec.

The M5 bolts on a Titleist 910D probably has a torque of 6 foot pounds / 8 newton meters.
PING G25 12 degree w/S+ @ 45"
Titleist 910F 17 / 910h 24 & 27
Titleist 913Hd 20
Ping G15's with UST Recoils F3
Cleveland RTX 53 / 588 56
Protype ix #9HT putter

#10 RookieBlue7

RookieBlue7

    Hall of Fame

  • ClubWRX Charter Members
  • 8,372 posts
  •  
  • Member #: 50335
  • Joined: 03/01/2008
  • Location:Euharlee, GA
GolfWRX Likes : 412

Posted 15 February 2013 - 01:45 PM

Torque isn't measured in pounds, that's a measure of weight. They're in in-lbf or inch-pounds of force. Yes, you can use the ones set at 40 in all the heads they'll fit with that torque setting. Not positive on what the Cally is set at though. I can tell you I always used the yellow 30 in-lbf wrench for weights and the white wrench to tighten all the heads at the 40 in-lbf rating.


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with existing members and access to certain forums. Join our community today and enter into a chance to win a free regular giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

#11 Skaffa77

Skaffa77

    Dismal River. There's nothing dismal about it!

  • ClubWRX Charter Members
  • 6,199 posts
  •  
  • Member #: 23067
  • Joined: 12/24/2006
  • Location:Omaha, NE
  • Ebay ID:Skaffa77
GolfWRX Likes : 360

Posted 15 February 2013 - 01:51 PM

The only difference I knew about were the older TM wrenches which didn't have the same torque.

http://www.golfwrx.c...s/#entry3946581

Edited by Skaffa77, 15 February 2013 - 02:12 PM.


#12 OUZO Power

OUZO Power

    #CALLAWRX2 @K_Kyriopoulos

  • ClubWRX Charter Members
  • 2,409 posts
  •  
  • Member #: 207419
  • Joined: 10/16/2012
  • Location:Brooklin, Ontario
  • Ebay ID:ouzolude
GolfWRX Likes : 528

Posted 15 February 2013 - 02:31 PM

View Postdirtyboy, on 15 February 2013 - 01:04 PM, said:

View PostOUZO Power, on 15 February 2013 - 11:31 AM, said:

Callaway, TM & Titleist use the same torx bit. But the Torque Setting on each wrng for each club is different.

What are they?
Forgive me but I do not know. I was told this and my engineering background would drive me to this conclusion. Each manufacturer would have there own torque spec.
Driver: Callaway Big Bertha Alpha 9.0
Woods: Callaway Big Bertha 3W & 5W
Irons: Callaway Apex 4-9, PW, AW, SW
Wedges: Callaway Mack Daddy 2 Chrome 60
Putter: Odyssey Metal X Milled #9HT
Ball: Callaway SS Yellow & SR-2

#13 dirtyboy

dirtyboy

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,730 posts
  •  
  • Member #: 47459
  • Joined: 01/29/2008
GolfWRX Likes : 48

Posted 15 February 2013 - 02:55 PM

Who told you this?  IIRC TM and Titleist use the exact same torque.

#14 Kylekoz17

Kylekoz17

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 476 posts
  •  
  • Member #: 204917
  • Joined: 09/28/2012
  • Location:Buffalo
  • Ebay ID:Snipperdo17
GolfWRX Likes : 57

Posted 16 February 2013 - 10:37 PM

I have used the same wrench in callaway, taylormade, titleist, and nike clubs with 0 problems.
Sldr - AD DI 6x
Sldr - AD DI 7x/ Covert Tour 2.0 KK Tini
Titleist 910h 19* - Kai'li
714 AP2 4-pw X100
Nike VR Pro 52, 56 black oxide
Versa 7 BWB, Scotty SS Newport

#15 OUZO Power

OUZO Power

    #CALLAWRX2 @K_Kyriopoulos

  • ClubWRX Charter Members
  • 2,409 posts
  •  
  • Member #: 207419
  • Joined: 10/16/2012
  • Location:Brooklin, Ontario
  • Ebay ID:ouzolude
GolfWRX Likes : 528

Posted 17 February 2013 - 12:26 AM

View Postdirtyboy, on 15 February 2013 - 02:55 PM, said:

Who told you this?  IIRC TM and Titleist use the exact same torque.
if you asking me I answered above in my other posts.

Since you want exact details, it was the guy working the proshop counter at golf town. Who also happens to be a friend. I remember I was hitting the RAZR FIT on the LM. And wanted to change some settings and went to grab a TM wrench. He advised against that and said each brand uses its own torque setting.

But since you know for a fact they all use the same torque settings I'm glad you shed some light on this issue.

Edited by OUZO Power, 17 February 2013 - 12:30 AM.

Driver: Callaway Big Bertha Alpha 9.0
Woods: Callaway Big Bertha 3W & 5W
Irons: Callaway Apex 4-9, PW, AW, SW
Wedges: Callaway Mack Daddy 2 Chrome 60
Putter: Odyssey Metal X Milled #9HT
Ball: Callaway SS Yellow & SR-2

#16 stage1350

stage1350

    If you stand for nothing, you'll fall for anything.

  • Members
  • PipPipPipPipPipPipPip
  • 8,511 posts
  •  
  • Member #: 664
  • Joined: 05/12/2005
  • Location:5 stars, 5 diamonds, 28 tables, 600 slots. Life is good...
  • Ebay ID:stage1350
GolfWRX Likes : 1151

Posted 17 February 2013 - 01:55 AM

TM used to torque all weights at 30 in-lbs.  When R9 came out, they wanted the sleeve torqued to 40 in-lbs.

I've torqued my R9 sleeves to 30 in-lbs with the older wrenches and have never had an issue with the shaft backing out.  But the 40 in-lb wrench is notorious for shearing off the 1g and 2g weights in the ports if you use it.

30 in-lbs is defintely sufficient for the TM and Anser sleeves.
Tour Issue Superdeep 9.5 w/ PX-8A4
X-Hot Pro 3Deep 13 w/ PX-10A2
Tour Issue 585.H 17 w/ Diamana Thump X
Mizuno MP-63 3-PW w/ DG Tour X7
Bettinardi Solid Copper BB2 RJB1982
Scratch <1018DS> w/ DG Tour X7

#17 dirtyboy

dirtyboy

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,730 posts
  •  
  • Member #: 47459
  • Joined: 01/29/2008
GolfWRX Likes : 48

Posted 17 February 2013 - 09:23 AM

View PostOUZO Power, on 17 February 2013 - 12:26 AM, said:

View Postdirtyboy, on 15 February 2013 - 02:55 PM, said:

Who told you this?  IIRC TM and Titleist use the exact same torque.
if you asking me I answered above in my other posts.

Since you want exact details, it was the guy working the proshop counter at golf town. Who also happens to be a friend. I remember I was hitting the RAZR FIT on the LM. And wanted to change some settings and went to grab a TM wrench. He advised against that and said each brand uses its own torque setting.

But since you know for a fact they all use the same torque settings I'm glad you shed some light on this issue.

I don't know about the RAZR Fit but the other 2 are the same.   It would be easy to test if you had a small torque wrench and all 3 wrenchs.

#18 RJRJRJ

RJRJRJ

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,150 posts
  •  
  • Member #: 106301
  • Joined: 04/14/2010
  • Location:LA, CA
GolfWRX Likes : 734

Posted 18 February 2013 - 01:27 AM

Ive used  TM wrench inTM (R11), titleist, and Ping.  Same thing.
Ping G25 RIP Phenom
R11 3 Wood
Adams SS Super Hybrid 19*
i20 4-UW
Cleveland CG14 56 & 60
Taylormade TM-110




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

GolfWRX Sponsors