0
This topic is locked
All items are priced including PP fees and shipping. Please PM for PP info, questions, offers, requests, etc. Photos below are clickable thumbnails to full size versions.
PLEASE NO TRADES but feel free to make a cash offer of any kind. Thanks!
Tourstage Headcovers - Driver, 3W, 5W
A set of three Tourstage wood headcovers including driver, 3W and 5W. Used but in excellent condition. Some very minor wear on the piping but otherwise really nice. Typical JDM high quality, these covers are actually relatively hefty for HCs. I usually walk and carry so hardly ever opted to use them.
$75 65 OBO
Scotty Cameron Mil-Spec Newport 33"/350g
33"
350g head weight
"Upright" lie angle (73*)
Red Studio Design grip
Original YSC stepped shaft with original "Shield" shaft band
No HC
https://www.scottyca...d=88&seasonID=9
I believe this to be a 2nd generation Mil-Spec (circa '01-'02) as opposed to 1st gen (circa '00) because the bumpers curve convexly to the ground. The 1st gen used the older "Classics" Newport head shape with the bumpers concave and curving the same direction as the sole line. This looks to be a custom order given the serial laser engraved on the inside of the neck and the "Upright" lie angle designated by the sole stamping. Overall condition is very good to excellent for its age and I don't believe this has ever been restored, refurbished, or worked on aftermarket so head weight should be 350g+ in case you want to get it restored and fear losing weight. I tried to capture the exact condition as best as possible - some finish wear, minor scratches and dings but nothing distracting from address. Great "gamer" condition, this putter has a lot of subtle character from being played... certainly not a wall hanger nor a beater by any means.
Get an all-time great putter in a highly coveted configuration in excellent, non-restored condition to game now, keep for a while, and refurbish down the line. Many consider the Mil-Spec to be the closest OTR Scotty to a "tour" or custom stick from arguably Cameron's best years (late '90s to early '00s). You can never have too many Mil-Specs so I don't mind keeping this one if the right offer doesn't come along.
I can alter the loft/lie angle in a Mitchell dedicated putter machine upon request.
$200 190 OBO
Gauge Design Japan "The One"
33"
Unknown head weight but believe it to be minimum 340-345g and with all the lead tape on it now, likely 350-355g
Not sure of the stock specs (loft/lie) but can measure and bend to whatever in my Mitchell upon request
PINGMan Blackout (well-worn and unless you like the slick, rounded edge feel will likely need to be replaced)
No HC
"The One" is from the years of Gauge Design Japan when David Whitlam was either still designing putters for them or was in dispute with the Japanese owner. There's a long history that's been discussed here at WRX and elsewhere over the years. Not sure if any of the rumors have been substantiated but I digress...
Along with "The Balde" (Anser 1 style) from the same era, "The One" is a forged, super-soft putter in the Anser 2 style (sharper lines, pointed heel, etc.). Face milling is exquisite (loops) and the quality is typical JDM. Overall in excellent condition aside from the grip (replacement options available).
I can alter the loft/lie angle in a Mitchell dedicated putter machine upon request.
$115 105 OBO
Odyssey Black Tour Design #2
33 1/4"
350g head weight
Black Iomic
Magnetic HC included
Ordered direct from Callaway. Gamed but in almost perfect condition with no noticeable finish wear. There is the slightest, nearly imperceptible imperfection in the top line, cavity side...completely unnoticeable at address and tough to see upon close inspection (couldn't capture in photo). Stock Odyssey Winn grip was removed and I installed the black Iomic. Shaft is starting to cut through butt of grip but doesn't affect playability.
This is a fantastic, underrated putter that I've actually made a ton of putts with and honestly wouldn't mind hanging on to it. Deep milled face produces a very soft feel...almost as if it had a typical Odyssey White-whatever insert.
$125 110 105 OBO
PING IsoForce Anser F - 124 Ti Pixel Version
34"
Unknown head weight but feels around 340g
New PINGMan Blackout (silver paint) with a few extra wraps underneath (2 or 3, can't remember)
No HC
This is the rarer 124 Ti Pixel version of this putter and not the 96(?) aluminum pixel model. I believe the original finish may have been the matte black one but I'm not sure. I purchased it like this. You can do a search here at WRX for "Isoforce" or "anser f" and come up with some info but here's a topic I posted a while back when I first got this particular stick: http://www.golfwrx.c...oforce-anser-f/
$125 105 OBO
Taylormade Driver Headcovers -R9 Tour Preferred & R11 non-TP
A couple of random HCs. Honestly can't tell if these have been used as they don't show it.
$15 ea - R9TP SOLD
Cobra S3 Pro MB 7i
STD L/L/L
DGS300
$OLD
Vokey Limited Custom Design 60 L Grind Wedge Head
Head only (can shaft if necessary, PM me)
60* Loft, 64* Lie (STD)
JAA Initials (one letter different and I might have kept it
)
QPQ Finish (probably THE best black finish I've ever used...durable, glare-free)
NON-Conforming grooves
Maybe 1 round use before I pulled the KBS Black Nickel to put in a different wedge. Overall in EXCELLENT condition as evident in photos.
I have a number of Limited Release Custom Design Vokeys (V, M, 56TK, etc). This is a Slider/Sweeper low bounce grind and doesn't suit me so it's time to let it go.
http://www.vokey.com...ks/archive.aspx (Page 4 - Spin Milled 60-L)
http://www.vokey.com...our-grinds.aspx (Under Slider/Sweeper section)
Inspiration The L Grind was developed by Voke for a major champion and former Titleist Brand Ambassador, whose nickname inspired the “L”. Features
The L Grind contains the narrowest forward bounce surface of all of Voke's grinds and features a very little camber. Benefit
The narrow crescent shaped bounce sole reduces the effective bounce. The reduced bounce will provide Slider/Sweeper players crisp contact in Normal to Firm playing conditions Suitable For
The L is a great wedge for a Slider/Sweeper player, playing in normal to firm playing conditions Models 58.06, 60.04
$OLD
Royal Precision (pre-TT) RIFLE Project X 5.5 SATIN shaft pulls
3-PW
.355" taper (PLEASE NOTE 5I SHAFT IS .370")
shaft labels in good shape
Bonus wedge shafts included (2 X Satin 5.5, 2 X Chrome 5.5 with yellow Iomics)
Raw Lengths (please don't ask how long they'll play installed since it's dependent on heads):
3i - 37 3/4"
4i - 37 1/4"
5i - 36 3/4"
6i - 36 1/4"
7i - 35 3/4"
8i - 35 1/4"
9i - 34 3/4"
PW - 34 11/16" (don't ask me why)
Satin W - 34 3/8"
Satin W - 33 1/4"
Chrome W - 34" (not including grip)
Chrome W - 33 3/4" (not including grip)
I actually had this up for sale and sold a few months ago but prior to shipping them out I did a last minute examination and found the 5i shaft to be .370" and NOT .355" taper like all the others (positive about those being taper tip).
As a result, they're up for sale again at an appropriate price since you would likely need to find another 5i shaft (doubt you would want to ream out just your 5i to accommodate).
$OLD
Bridgestone Tourstage B-1
34"
Unknown head weight but believe it to be at least 340g, if not 345-350g
Red Medium Iomic
Magnetic HC included
Below are links to BS specs and a "preview" by pitbull808 from whom I purchased the putter a few years ago. Fantastic putter with "groove" tech on the face for improved roll. Carbon steel and solid all around...just like most all BS/TS products. There are no dings, dents, or nicks but there is some finish wear (not sure how since I gamed it less than a half dozen rounds in all).
http://www.progolfja...rstage-Putter2/
http://www.golfwrx.c...1-putter-wpics/
$OLD
KBS Tour pulls + 4i, 7i, 8i blanks
4-PW + 3 prepped and +1" butt cut new shafts (4,7,8)
Stiff Flex
.355" taper tip
Lamkin Crossline Black grips & ungripped
Lengths:
37", 36 1/2", 36", 35 1/2", 35", 34 1/2", 34 1/4"
38 1/8", 36 3/4", 36 1/8"
4-PW were pulled from a set of Miura CB-202s and played under-length by about a 1/4-1/2". Can likely be soft stepped at STD length but I offer no guarantees.
4i, 7i, 8i blanks have been prepped and butt cutt to play ~+1" in most iron heads. These were part of a set of shafts I used to fix single irons.
I make no guarantees of playing length once installed so please be aware of raw lengths.
$OLD for all 10 shafts
PLEASE NO TRADES but feel free to make a cash offer of any kind. Thanks!
Tourstage Headcovers - Driver, 3W, 5W
A set of three Tourstage wood headcovers including driver, 3W and 5W. Used but in excellent condition. Some very minor wear on the piping but otherwise really nice. Typical JDM high quality, these covers are actually relatively hefty for HCs. I usually walk and carry so hardly ever opted to use them.
$
Scotty Cameron Mil-Spec Newport 33"/350g
33"
350g head weight
"Upright" lie angle (73*)
Red Studio Design grip
Original YSC stepped shaft with original "Shield" shaft band
No HC
https://www.scottyca...d=88&seasonID=9
I believe this to be a 2nd generation Mil-Spec (circa '01-'02) as opposed to 1st gen (circa '00) because the bumpers curve convexly to the ground. The 1st gen used the older "Classics" Newport head shape with the bumpers concave and curving the same direction as the sole line. This looks to be a custom order given the serial laser engraved on the inside of the neck and the "Upright" lie angle designated by the sole stamping. Overall condition is very good to excellent for its age and I don't believe this has ever been restored, refurbished, or worked on aftermarket so head weight should be 350g+ in case you want to get it restored and fear losing weight. I tried to capture the exact condition as best as possible - some finish wear, minor scratches and dings but nothing distracting from address. Great "gamer" condition, this putter has a lot of subtle character from being played... certainly not a wall hanger nor a beater by any means.
Get an all-time great putter in a highly coveted configuration in excellent, non-restored condition to game now, keep for a while, and refurbish down the line. Many consider the Mil-Spec to be the closest OTR Scotty to a "tour" or custom stick from arguably Cameron's best years (late '90s to early '00s). You can never have too many Mil-Specs so I don't mind keeping this one if the right offer doesn't come along.
I can alter the loft/lie angle in a Mitchell dedicated putter machine upon request.
$
Gauge Design Japan "The One"
33"
Unknown head weight but believe it to be minimum 340-345g and with all the lead tape on it now, likely 350-355g
Not sure of the stock specs (loft/lie) but can measure and bend to whatever in my Mitchell upon request
PINGMan Blackout (well-worn and unless you like the slick, rounded edge feel will likely need to be replaced)
No HC
"The One" is from the years of Gauge Design Japan when David Whitlam was either still designing putters for them or was in dispute with the Japanese owner. There's a long history that's been discussed here at WRX and elsewhere over the years. Not sure if any of the rumors have been substantiated but I digress...
Along with "The Balde" (Anser 1 style) from the same era, "The One" is a forged, super-soft putter in the Anser 2 style (sharper lines, pointed heel, etc.). Face milling is exquisite (loops) and the quality is typical JDM. Overall in excellent condition aside from the grip (replacement options available).
I can alter the loft/lie angle in a Mitchell dedicated putter machine upon request.
$
Odyssey Black Tour Design #2
33 1/4"
350g head weight
Black Iomic
Magnetic HC included
Ordered direct from Callaway. Gamed but in almost perfect condition with no noticeable finish wear. There is the slightest, nearly imperceptible imperfection in the top line, cavity side...completely unnoticeable at address and tough to see upon close inspection (couldn't capture in photo). Stock Odyssey Winn grip was removed and I installed the black Iomic. Shaft is starting to cut through butt of grip but doesn't affect playability.
This is a fantastic, underrated putter that I've actually made a ton of putts with and honestly wouldn't mind hanging on to it. Deep milled face produces a very soft feel...almost as if it had a typical Odyssey White-whatever insert.
$
PING IsoForce Anser F - 124 Ti Pixel Version
34"
Unknown head weight but feels around 340g
New PINGMan Blackout (silver paint) with a few extra wraps underneath (2 or 3, can't remember)
No HC
This is the rarer 124 Ti Pixel version of this putter and not the 96(?) aluminum pixel model. I believe the original finish may have been the matte black one but I'm not sure. I purchased it like this. You can do a search here at WRX for "Isoforce" or "anser f" and come up with some info but here's a topic I posted a while back when I first got this particular stick: http://www.golfwrx.c...oforce-anser-f/
$
Taylormade Driver Headcovers -
A couple of random HCs. Honestly can't tell if these have been used as they don't show it.
$15 ea - R9TP SOLD
Cobra S3 Pro MB 7i
STD L/L/L
DGS300
$OLD
Vokey Limited Custom Design 60 L Grind Wedge Head
Head only (can shaft if necessary, PM me)
60* Loft, 64* Lie (STD)
JAA Initials (one letter different and I might have kept it
)QPQ Finish (probably THE best black finish I've ever used...durable, glare-free)
NON-Conforming grooves
Maybe 1 round use before I pulled the KBS Black Nickel to put in a different wedge. Overall in EXCELLENT condition as evident in photos.
I have a number of Limited Release Custom Design Vokeys (V, M, 56TK, etc). This is a Slider/Sweeper low bounce grind and doesn't suit me so it's time to let it go.
http://www.vokey.com...ks/archive.aspx (Page 4 - Spin Milled 60-L)
http://www.vokey.com...our-grinds.aspx (Under Slider/Sweeper section)
Inspiration The L Grind was developed by Voke for a major champion and former Titleist Brand Ambassador, whose nickname inspired the “L”. Features
The L Grind contains the narrowest forward bounce surface of all of Voke's grinds and features a very little camber. Benefit
The narrow crescent shaped bounce sole reduces the effective bounce. The reduced bounce will provide Slider/Sweeper players crisp contact in Normal to Firm playing conditions Suitable For
The L is a great wedge for a Slider/Sweeper player, playing in normal to firm playing conditions Models 58.06, 60.04
$OLD
Royal Precision (pre-TT) RIFLE Project X 5.5 SATIN shaft pulls
3-PW
.355" taper (PLEASE NOTE 5I SHAFT IS .370")
shaft labels in good shape
Bonus wedge shafts included (2 X Satin 5.5, 2 X Chrome 5.5 with yellow Iomics)
Raw Lengths (please don't ask how long they'll play installed since it's dependent on heads):
3i - 37 3/4"
4i - 37 1/4"
5i - 36 3/4"
6i - 36 1/4"
7i - 35 3/4"
8i - 35 1/4"
9i - 34 3/4"
PW - 34 11/16" (don't ask me why)
Satin W - 34 3/8"
Satin W - 33 1/4"
Chrome W - 34" (not including grip)
Chrome W - 33 3/4" (not including grip)
I actually had this up for sale and sold a few months ago but prior to shipping them out I did a last minute examination and found the 5i shaft to be .370" and NOT .355" taper like all the others (positive about those being taper tip).
As a result, they're up for sale again at an appropriate price since you would likely need to find another 5i shaft (doubt you would want to ream out just your 5i to accommodate).
$OLD
Bridgestone Tourstage B-1
34"
Unknown head weight but believe it to be at least 340g, if not 345-350g
Red Medium Iomic
Magnetic HC included
Below are links to BS specs and a "preview" by pitbull808 from whom I purchased the putter a few years ago. Fantastic putter with "groove" tech on the face for improved roll. Carbon steel and solid all around...just like most all BS/TS products. There are no dings, dents, or nicks but there is some finish wear (not sure how since I gamed it less than a half dozen rounds in all).
http://www.progolfja...rstage-Putter2/
http://www.golfwrx.c...1-putter-wpics/
$OLD
KBS Tour pulls + 4i, 7i, 8i blanks
4-PW + 3 prepped and +1" butt cut new shafts (4,7,8)
Stiff Flex
.355" taper tip
Lamkin Crossline Black grips & ungripped
Lengths:
37", 36 1/2", 36", 35 1/2", 35", 34 1/2", 34 1/4"
38 1/8", 36 3/4", 36 1/8"
4-PW were pulled from a set of Miura CB-202s and played under-length by about a 1/4-1/2". Can likely be soft stepped at STD length but I offer no guarantees.
4i, 7i, 8i blanks have been prepped and butt cutt to play ~+1" in most iron heads. These were part of a set of shafts I used to fix single irons.
I make no guarantees of playing length once installed so please be aware of raw lengths.
$OLD for all 10 shafts
