
Here's what's going in the bag for the 2012 season, enjoy 
Woods
Titleist 910 D3 9.5⁰ | Fujikura Motore F3 60 X @ 44.75"
Titleist 910 Fd 15.0⁰ | Fujikura Motore F3 70 X @ 42.75"
Titleist 910 H 19.0⁰ | Aldila VS Proto Hybrid 95 X @ 39.5"
Irons
Here's the thread detailing my Tour Department iron and wedge order: http://www.golfwrx.c...29#entry4311629
Scratch Tour Department Don White 4-PW | Modified D/S & D/D - Satin Chrome - KBS Tour S hard-stepped @ +1/2"
Wedges
The 52⁰ is a slightly modified SND grind that also has a more square toe shape. The 56⁰ is a modified SND grind with additional trailing edge relief and a rolled heel. The 60⁰ is a modified SLT grind with some reduced bounce to be better from tighter lies. All three are the raw satin finish, which will rust over time.
Scratch Tour Department Jeff McCoy 52⁰ | Modified SND - Raw Satin - KBS Tour S+ tiger-stepped @ 36.25"
Scratch Tour Department Jeff McCoy 56⁰ | Modified SND - Raw Satin - KBS Tour S+ tiger-stepped @ 36"
Scratch Tour Department Jeff McCoy 60⁰ | Modified SLT - Raw Satin - KBS Tour S+ tiger-stepped @ 36"
Putters
I'll be rotating between these two for the year (and hopefully beyond). Both are 340g @ 35" and have similar toe hang, but the Byron Morgan has 3/4 shaft offset and the Machine has 1/2 shaft offset. After working with Bruce Rearick we determined that my stroke works best with 1/2 to 3/4 shaft offset, a 69* lie angle, and a length of 35". The Byron also has a rounded top line that is much slimmer than the Machine, giving it a longer appearance from heel to toe.
Byron Morgan 612 | 303 American Stainless Steel - Brushed Satin
Machine M1A Fixer | 1018 Carbon Steel - Hot Salts Gunmetal Blue
Woods
Titleist 910 D3 9.5⁰ | Fujikura Motore F3 60 X @ 44.75"
Titleist 910 Fd 15.0⁰ | Fujikura Motore F3 70 X @ 42.75"
Titleist 910 H 19.0⁰ | Aldila VS Proto Hybrid 95 X @ 39.5"
Irons
Here's the thread detailing my Tour Department iron and wedge order: http://www.golfwrx.c...29#entry4311629
Scratch Tour Department Don White 4-PW | Modified D/S & D/D - Satin Chrome - KBS Tour S hard-stepped @ +1/2"
Wedges
The 52⁰ is a slightly modified SND grind that also has a more square toe shape. The 56⁰ is a modified SND grind with additional trailing edge relief and a rolled heel. The 60⁰ is a modified SLT grind with some reduced bounce to be better from tighter lies. All three are the raw satin finish, which will rust over time.
Scratch Tour Department Jeff McCoy 52⁰ | Modified SND - Raw Satin - KBS Tour S+ tiger-stepped @ 36.25"
Scratch Tour Department Jeff McCoy 56⁰ | Modified SND - Raw Satin - KBS Tour S+ tiger-stepped @ 36"
Scratch Tour Department Jeff McCoy 60⁰ | Modified SLT - Raw Satin - KBS Tour S+ tiger-stepped @ 36"
Putters
I'll be rotating between these two for the year (and hopefully beyond). Both are 340g @ 35" and have similar toe hang, but the Byron Morgan has 3/4 shaft offset and the Machine has 1/2 shaft offset. After working with Bruce Rearick we determined that my stroke works best with 1/2 to 3/4 shaft offset, a 69* lie angle, and a length of 35". The Byron also has a rounded top line that is much slimmer than the Machine, giving it a longer appearance from heel to toe.
Byron Morgan 612 | 303 American Stainless Steel - Brushed Satin
Machine M1A Fixer | 1018 Carbon Steel - Hot Salts Gunmetal Blue
Edited by Thaddy, 04 July 2012 - 06:59 PM.













