0
This topic is locked
I have a nice combo set of Mizuno 58/68 5-PW, two 910D shafts for sale, both have titleist tour velvet grips in very good condition, holograms from Titleist on the shafts, and authentic 910 adapters. Also have a set of Project X 5.5 pulls for sale
1. Mizuno 58/68 combo set with KBS Tour Stiff flex shafts. 5 and 6 irons are MP-58, 7-PW are MP-68 (6 irons total, 5-PW). Soles are good, 7 iron does have a scrape on the sole which is pictured. Grooves are still deep with minimal if any wear, faces show normal marks from hitting balls. Minimal bag chatter are present on these irons. I am selling these for a friend who bought these when they were like new and played with them for 6 months last summer. He said the guy he bought them from used the KBS shafts out of a set of R9TP to re-shaft these and as can be seen by the pictures, he didn't fully seat the ferrules, but this is merely cosmetic and can't be noticed at address. As far as he knows these are std L/L/L. All grips are Taylormade tour velvet 360 standard size except for the PW which is a Golf Pride tour velvet midsize. Pics of faces are of 8, 9, PW and are representative of whole set.The pics of the backs of clubs are representative of the whole set$425 $415 shipped obo
[attachment=1099941:IMAG0939.jpg][attachment=1099939:IMAG0940.jpg][attachment=1099937:IMAG0941.jpg][attachment=1099927:IMAG0946.jpg][attachment=1099923:IMAG0947.jpg][attachment=1099921:IMAG0948.jpg][attachment=1099909:IMAG0955.jpg][attachment=1099947:IMAG0954.jpg][attachment=1099955:IMAG0951.jpg][attachment=1099957:IMAG0950.jpg]
2. Project X-7C3 73 g 6.0 Tip-Stiff , length is just over 44" tip to end of grip$120 shipped obo , $90 shipped obo Sold to mojomover. Thanks!!
3. Fujikura Motore F3 60 Stiff Flex, length is 44 1/4" from tip to end of grip $120 shipped
4. Project X 5.5 4-PW .355 taper tip, 5-PW has Iomic Sticky grips that are still tacky and have plenty of life left, but look dirty but have been cleaned thoroughly. 4 iron shaft has a black widow grip that is in ok condition, playable but I would probably change it.$95 $85 shipped obo
Lengths are
4 - 37 1/8" , 5 - 36 7/8" , 6 - 36 1/4" , 7 - 35 3/4" , 8 - 35 1/8" , 9 - 34 5/8" , PW - 34.5"
Not sure how these should play when installed, but I think they should be standard to minus 1/4". If anyone wants to confirm or dispute, please PM and let me know. Also, I have some shaft extenders I can throw in if anyone wants.
[attachment=1099799:IMAG0937.jpg][attachment=1099801:IMAG0938.jpg]
1. Mizuno 58/68 combo set with KBS Tour Stiff flex shafts. 5 and 6 irons are MP-58, 7-PW are MP-68 (6 irons total, 5-PW). Soles are good, 7 iron does have a scrape on the sole which is pictured. Grooves are still deep with minimal if any wear, faces show normal marks from hitting balls. Minimal bag chatter are present on these irons. I am selling these for a friend who bought these when they were like new and played with them for 6 months last summer. He said the guy he bought them from used the KBS shafts out of a set of R9TP to re-shaft these and as can be seen by the pictures, he didn't fully seat the ferrules, but this is merely cosmetic and can't be noticed at address. As far as he knows these are std L/L/L. All grips are Taylormade tour velvet 360 standard size except for the PW which is a Golf Pride tour velvet midsize. Pics of faces are of 8, 9, PW and are representative of whole set.The pics of the backs of clubs are representative of the whole set
[attachment=1099941:IMAG0939.jpg][attachment=1099939:IMAG0940.jpg][attachment=1099937:IMAG0941.jpg][attachment=1099927:IMAG0946.jpg][attachment=1099923:IMAG0947.jpg][attachment=1099921:IMAG0948.jpg][attachment=1099909:IMAG0955.jpg][attachment=1099947:IMAG0954.jpg][attachment=1099955:IMAG0951.jpg][attachment=1099957:IMAG0950.jpg]
2. Project X-7C3 73 g 6.0 Tip-Stiff , length is just over 44" tip to end of grip
3. Fujikura Motore F3 60 Stiff Flex, length is 44 1/4" from tip to end of grip $120 shipped
4. Project X 5.5 4-PW .355 taper tip, 5-PW has Iomic Sticky grips that are still tacky and have plenty of life left, but look dirty but have been cleaned thoroughly. 4 iron shaft has a black widow grip that is in ok condition, playable but I would probably change it.
Lengths are
4 - 37 1/8" , 5 - 36 7/8" , 6 - 36 1/4" , 7 - 35 3/4" , 8 - 35 1/8" , 9 - 34 5/8" , PW - 34.5"
Not sure how these should play when installed, but I think they should be standard to minus 1/4". If anyone wants to confirm or dispute, please PM and let me know. Also, I have some shaft extenders I can throw in if anyone wants.
[attachment=1099799:IMAG0937.jpg][attachment=1099801:IMAG0938.jpg]
Edited by casey_0507, 04 April 2012 - 06:07 PM.
